{"product_id":"schweiss-trennmittel-emulsion-schweissperlen","title":"Anti-spatter spray","description":"\u003cp\u003eThe weld release agent prevents welding spatter from sticking to tools and workpieces. It is suitable for gas metal arc welding and shielded metal arc welding, is silicone-free and wax-free, and non-flammable. Unlike solvent-based release sprays, the product is an aqueous emulsion without solvents, which means there is no additional solvent load in the welding booth and no increased fire load at the workplace. The silicone-free nature is crucial for downstream processes: silicone residues lead to crater formation during painting. With proper application, treated workpieces are suitable for subsequent painting. For locksmiths and metal construction companies, this means less rework due to grinding and chiseling off adhering beads, less wear on welding nozzles and fixtures, and shorter cycle times per assembly. The application is undiluted and very thin with a hand atomizer or comparable spray device. A ready-to-use product is delivered, which can be provided directly at the welding workstation without a mixing station. Before post-treatment by painting or hot-dip galvanizing, the manufacturer recommends a test and, if necessary, cleaning of the workpiece.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAqueous emulsion without solvents, non-flammable\u003c\/li\u003e\n\n\u003cli\u003eSilicone-free and wax-free, paint-friendly with proper application\u003c\/li\u003e\n\n\u003cli\u003ePrevents welding beads from sticking to fixtures\u003c\/li\u003e\n\n\u003cli\u003eSuitable for gas metal arc welding and shielded metal arc welding\u003c\/li\u003e\n\n\u003cli\u003eUndiluted application with a hand atomizer, no mixing\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eFirst, clean workpieces of residues. Use the release agent undiluted and spray it on very thinly and evenly. Excessive application should be avoided to prevent pore formation in the weld metal and hydrogen-induced cracks in sensitive steels under critical stress. The agent must not get into the weld seam. Apply with a spray device, such as a hand atomizer. After spraying cold welding nozzles, remove any dripping. Shake vigorously before use. Before post-treatment of workpieces by painting or hot-dip galvanizing, a test and, if necessary, cleaning are recommended. Do not inhale spray mist and only process in well-ventilated areas; use existing extraction at the welding workstation.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady-to-use, do not dilute. Spray on very thinly and evenly, undiluted. Shake vigorously before use.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDue to the prescribed very thin application, about 15 to 25 milliliters per square meter of treated area should be applied. A 10-liter canister is thus theoretically sufficient for several hundred square meters of workpiece surface or for a large number of fixtures and welding nozzles in shift operation.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eWelding fixtures, clamping devices, clamping plates, welding nozzles and gas nozzles, workpieces and assemblies in gas metal arc welding and shielded metal arc welding, welding tables and supports in locksmiths, metal construction, and production lines.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eAqueous emulsion without solvents, silicone-free and wax-free, non-flammable. With proper application, treated workpieces are suitable for subsequent painting. Do not let it get into the weld seam. Before hot-dip galvanizing or painting, perform a test and, if necessary, cleaning. Apply particularly thinly to sensitive steels under critical stress.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eItem 993 is the aqueous, non-flammable variant in the Coverax range and complements the weld release agent (Item 315). For release and lubrication tasks outside of welding technology, Trennax-MS with silicone (Item 110) and the silicone-free Trennax OS (Item 111) are available.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572421497216,"sku":"993-0001","price":26.8,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572421529984,"sku":"993-0010","price":173.0,"currency_code":"EUR","in_stock":true},{"title":"30 L jerrycan","offer_id":58572421562752,"sku":"993-0030","price":477.5,"currency_code":"EUR","in_stock":true}],"url":"https:\/\/coverax.de\/en\/products\/schweiss-trennmittel-emulsion-schweissperlen","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}