{"product_id":"oelzieher-gel-oelflecken-stein-beton","title":"Oil Puller Gel","description":"\u003cp\u003eOil Puller Gel is a special gel for removing oil stains from alkali-resistant surfaces. It is applied as a paste-like layer to the stained area and extracts oil and oil residues from the subsurface within approximately 24 hours, without any mechanical processing. The difference from liquid degreasers lies in its retention time: because the gel does not run off and does not dry out prematurely, it works deeply for hours and even extracts old oil that has already penetrated concrete or screed. In addition, the product is suitable for removing fire soot and fire oil residues, as well as for eliminating fire odors caused by stubborn contaminants. For businesses, this means that remediation after oil damage or fires is possible without milling or sanding the floor. The area remains unused during the exposure time, after which a simple rinse is sufficient, ideally with a hot water high-pressure cleaner.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtracts oil in about 24 hours without mechanics\u003c\/li\u003e\n\n\u003cli\u003eRemains as a gel and does not dry out prematurely\u003c\/li\u003e\n\n\u003cli\u003eAlso effective against fire soot and fire oil residues\u003c\/li\u003e\n\n\u003cli\u003eReduces fire odors from stubborn contaminants\u003c\/li\u003e\n\n\u003cli\u003eContainer sizes from 1 kg to 66 kg available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean the surface of loose dirt and test material compatibility beforehand in an inconspicuous area. Apply Oil Puller Gel evenly to the area to be treated with a brush, swab, or rubber squeegee. Then cover if necessary so that the gel can optimally combine with the stain and does not dry out prematurely. After about 24 hours of exposure, rinse the surface with water, if possible with a hot water high-pressure cleaner. Repeat the process for heavy soiling. Do not enter the treated area during the exposure time and keep it cordoned off. After treatment, the manufacturer recommends an oleophobic impregnation to prevent renewed oil penetration. Wear protective gloves.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDepending on the layer thickness and absorbency of the substrate, approximately 0.5 to 1 kg per square meter should be planned. The 1 kg can therefore covers about one to two square meters of stained area, and the 33 kg canister about 33 to 66 m².\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eWorkshop and hall floors, garages and underground car parks, parking spaces and courtyards, terraces as well as areas after fire damage with soot and fire oil residues.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for all alkali-resistant surfaces such as concrete, cement, tiles, stoneware, artificial stone, and wood. Not for alkali-sensitive coverings. Material compatibility must be tested in an inconspicuous area before application, and the treated area must not be entered during the exposure time.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCovil Öl-Ex Liquid (Art. 354) is poured on as a liquid, gels on the surface, and is brushed off dry, making it the faster solution for applications without a water connection. Oil Puller Gel requires approximately 24 hours of retention time and subsequent rinsing, but it also extracts deeply absorbed old oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572405473664,"sku":"358-0010","price":179.0,"currency_code":"EUR","in_stock":true}],"url":"https:\/\/coverax.de\/en\/products\/oelzieher-gel-oelflecken-stein-beton","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}