{"title":"Craft","description":"","products":[{"product_id":"cover-mos-rostloeser-spray","title":"Cover-MOS","description":"\u003cp\u003eCover-MOS is a high-performance rust remover with MoS2 additive for seized screw and plug connections. With a very low density of 0.716, the product achieves exceptional creeping ability: it penetrates into the finest gaps, undercuts moisture, and climbs upwards in threads even against gravity. Connections that could previously only be loosened by heating or destruction become workable again. After loosening, a thin protective film remains, which protects metal parts from renewed corrosion and permanently eliminates squeaking noises on moving parts. For workshops and maintenance, Cover-MOS is thus a time-saver that noticeably reduces follow-up costs due to damaged components.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtreme creeping ability due to density 0.716 – also works overhead\u003c\/li\u003e\n\n\u003cli\u003eLoosens the toughest rust connections without heating\u003c\/li\u003e\n\n\u003cli\u003eLeaves a corrosion-protective lubricating film\u003c\/li\u003e\n\n\u003cli\u003ePermanently eliminates squeaking noises\u003c\/li\u003e\n\n\u003cli\u003eReduces disassembly damage and downtime\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eApply in short bursts directly to the seized connection. Depending on the degree of corrosion, allow to act for 5–15 minutes; for heavy rust, repeat the process. Then loosen the connection.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray selectively, do not atomize over large areas.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eA 400-ml can loosens approx. 100–150 screw connections, depending on the degree of corrosion.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eTie rods, stud bolts, mufflers, cylinder head bolts, screw and plug connections, seized mechanical parts on vehicles, construction machinery, winter service equipment, production machines, tools, and scaffolding.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for all metals. Avoid contact with brake pads, V-belts, and painted visible surfaces.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eAS80-T05K-F006-9NTH\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSignal word:\u003c\/strong\u003e Danger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-statements:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapour.; H226 Flammable liquid and vapour.; H229 Pressurised container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH-statements:\u003c\/strong\u003e EUH018 In use may form flammable\/explosive vapour-air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurised container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C\/122 °F.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international regulations.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 338 ENTRO-GEL is the pasty variant for vertical surfaces with a long exposure time; Art. 679 ENTRO is the liquid immersion variant. Cover-MF40 (Art. 10202) is the broader multi-functional spray with lower loosening performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572385583488,"sku":"102-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822818300288,"sku":"102,06","price":93.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572385616256,"sku":"102-12","price":164.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822818333056,"sku":"102-24","price":300.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-mos-rostloeser-montagespray-produktbild.png?v=1785329178"},{"product_id":"cover-zink-ab-zinkspray-korrosionsschutz","title":"Cover-Zink AB","description":"\u003cp\u003eCover-Zink AB is a zinc repair spray with 99% zinc purity for restoring cathodic corrosion protection to hot-dip galvanized structures. The bright, zinc-like shade is practically indistinguishable from fresh hot-dip galvanization – welds and defects remain inconspicuous after repair. The self-forming zinc oxide seals the surface and provides lasting protection against rust, corrosion, and weathering. The coating dries quickly, is resistant to many chemicals, and remains electrically conductive, making it suitable for use as a spot welding paint and as a conductive intermediate layer. For metal construction, steel construction, and maintenance, the product is the economical way to restore corrosion protection after welding and processing work in accordance with standards.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e99% zinc purity for full cathodic protection\u003c\/li\u003e\n\n\u003cli\u003eVisually indistinguishable from fresh hot-dip galvanization\u003c\/li\u003e\n\n\u003cli\u003eElectrically conductive – usable as spot welding paint\u003c\/li\u003e\n\n\u003cli\u003eQuick-drying, thus time-saving in the process\u003c\/li\u003e\n\n\u003cli\u003eResistant to many chemicals and weathering\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eThoroughly derust and degrease the substrate. Bring the can to room temperature and shake vigorously for approx. 2 minutes until the mixing ball moves freely. Apply in thin layers from a distance of 25–30 cm, allowing 5 minutes of flash-off time between each layer. Use only in well-ventilated areas.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Apply 2–3 thin layers instead of one thick layer.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003eOne 400ml can covers approx. 1.5–2 m² of protected area with two coats.\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eWelds and defects on hot-dip galvanized structures, railings, scaffolding, steel construction, car body construction, heat-conducting parts, spot welding preparation.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eFor steel and galvanized surfaces. Not for aluminum without pre-treatment. Cover adjacent areas.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI number\u003c\/td\u003e\n\n\u003ctd\u003eMU80-90UY-R00Q-Y0DK\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation mark; GHS09 Environmental hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-statements:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.; May cause genetic defects (state route of exposure if it is conclusively proven that the hazard does not exist via any other route of exposure); May cause cancer (state route of exposure if it is conclusively proven that the hazard does not exist via any other route of exposure)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH statements:\u003c\/strong\u003e EUH018 In use, may form flammable\/explosive vapour\/air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international\u003cbr\u003eregulations.\u003c\/p\u003e\n\u003ch3\u003eProduct comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 114 ANTIROST offers transparent preservation protection without zinc content and is intended for storage and shipping. Cover-Zink AB is the choice when the zinc protection itself needs to be restored.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572385681792,"sku":"103-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823125008768,"sku":"103-06","price":93.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572385714560,"sku":"103-12","price":154.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823125041536,"sku":"103-24","price":300.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-zink-ab-zink-ausbesserungsspray-01-produktbild.png?v=1785329179"},{"product_id":"trennax-os-trennmittel-silikonfrei-lackierbar","title":"Trennax OS","description":"\u003cp\u003eTrennax OS is a silicone-free release and lubricant for all processes in which the treated surface subsequently needs to be painted, bonded, or metallized. This post-processability is precisely what distinguishes it from silicone-containing release agents and makes it the standard solution in paint shops, packaging, and clothing industries. The ignition temperature is above 300 °C, which allows its use in welding technology: Trennax OS reliably prevents welding spatter from adhering to the workpiece, torch nozzle, and fixture. In plastics processing, it serves as a mold release agent for thermoplastics and thermosets, with occasional spraying enabling multiple release operations – significantly reducing consumption per shot.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicone-free – subsequent painting, bonding, and metallizing possible\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature above 300 °C\u003c\/li\u003e\n\n\u003cli\u003ePrevents welding spatter from adhering\u003c\/li\u003e\n\n\u003cli\u003eMultiple release operations per spray application\u003c\/li\u003e\n\n\u003cli\u003eLubricates without sticking – no machine contamination\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eSpray from a distance of 30–50 cm. Can be sprayed in all positions, but do not spray horizontally to avoid gas loss. Remove residues from plastic molds beforehand.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. A thin spray film is sufficient; occasional re-spraying is enough for several release operations.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003eA 400 ml can covers approx. 15–20 m² of mold surface or several hundred release operations.\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eWelding technology (welding spatter protection), mold release agent in the plastics processing industry, locksmiths, automotive workshops, clothing and packaging industry, metal processing. Lubricates material guide surfaces on stamping and milling machines, saw blades and planing machines; prevents sticking of knitting and sewing machines, molding templates, and conveyor belts.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal, plastic (thermoplastics and thermosets), wood, and textile machines. Silicone-free – painting, bonding, and metallizing remain possible.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P273 Avoid release to the environment.; P302+P352 IF ON SKIN: Wash with plenty of water and soap.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\n\u003ch3\u003eProduct comparison\u003c\/h3\u003e\n\u003cp\u003eItem no. 110 Trennax-MS is the silicone-containing variant with additional care properties but without post-processability. Item no. 317 Trennax OS open is the canister variant for systems with automatic spraying.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386009472,"sku":"111-01","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823101776256,"sku":"111-06","price":91.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572386042240,"sku":"111-12","price":163.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823101809024,"sku":"111-24","price":303.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-trennax-os-trenn-gleitmittel-ohne-silikon-01-produktbild.png?v=1785329185"},{"product_id":"e-protect-feuchtigkeitsschutz-elektrik","title":"E-Protect","description":"\u003cp\u003eE-Protect is a water-displacing moisture protection for electrical devices and systems. The product penetrates and displaces water, forming a permanent protective film on all electrical parts without impairing conductivity. Ignition malfunctions and leakage currents are eliminated, and failures and downtimes in machines and systems are significantly reduced. E-Protect creeps into cavities and windings, but does not attack insulating varnishes and is neutral towards plastics, rubber, glass, ceramics, and metals. A practical side effect for vehicle fleets: Treated car engines become unattractive to martens, which demonstrably reduces marten damage. The product is resistant to vapors, salts, and water.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDisplaces water without affecting conductivity\u003c\/li\u003e\n\n\u003cli\u003eEliminates leakage currents and ignition malfunctions\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack insulating varnishes\u003c\/li\u003e\n\n\u003cli\u003eReduces marten damage to car engines\u003c\/li\u003e\n\n\u003cli\u003eReduces unplanned downtimes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSwitch off the power to the system if possible. Spray affected contacts, windings, and plug connections directly. Allow to air briefly, then put back into operation. Repeat at regular maintenance intervals for prevention.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Short, targeted sprays on contacts and windings.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 80–120 switch cabinet or plug connection treatments.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eElectric motors and windings, ignition systems, fuses and fuse boxes, switches and switchgear, terminals, junction boxes, signal and traffic light systems, plugs and sockets, cable reels, power distributors, vehicle electrics and lighting, boat engines and electrics, ventilation and air conditioning systems, garden lighting.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eNeutral towards plastics, rubber, glass, ceramics, and metals. Does not attack insulating varnishes. Resistant to vapors, salts, and water.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eUQ90-C0RX-T00N-KE77\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas Cylinder, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurised container: May burst if heated.; H280; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 318 COVER 21 and Art. 319 COVER 32 are liquid electrical cleaners in canisters for pre-cleaning. E-Protect is the subsequent protective film. Art. 136 Marten Repellent acts specifically as a deterrent.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572386664832,"sku":"113-01","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823090372992,"sku":"113-06","price":90.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572386697600,"sku":"113-12","price":165.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823090405760,"sku":"113-24","price":310.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-e-protect-kontaktspray-feuchtigkeitsschutz-01-produktbild.png?v=1785329188"},{"product_id":"kaeltespray-montage-demontage-fehlersuche","title":"Cold spray","description":"\u003cp\u003eCooling spray lowers the temperature of materials and components within seconds, making it a process tool for assembly, disassembly, and troubleshooting. In mechanical engineering, it accelerates the shrink-fitting of bearings and the joining of fits; the rapid shrinkage also allows for early error detection when reaching the fit dimension, which helps to avoid high defect rates from the outset. In the electrical and electronics industry, cooling spray is the standard aid for localizing temperature-dependent faults on components, circuit boards, and PCBs. The time saved compared to using a cooling chamber or dry ice is considerable and makes the product an economical tool for single-piece production and service.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCooling in seconds instead of minutes\u003c\/li\u003e\n\n\u003cli\u003eAccelerates shrink-fitting and joining of fits\u003c\/li\u003e\n\n\u003cli\u003eEarlier error detection reduces the reject rate\u003c\/li\u003e\n\n\u003cli\u003eStandard tool for electronics troubleshooting\u003c\/li\u003e\n\n\u003cli\u003eMobile use – no cooling chamber necessary\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray parts for approx. 10 seconds until the desired cooling is achieved. Caution: do not spray on surfaces or objects hotter than 50 °C. Cooling spray is highly flammable and combustible – keep away from ignition sources. Wear protective gloves (risk of frostbite).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Approx. 10 seconds spray duration per cooling process.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 40–60 cooling processes of 10 seconds each.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eElectrical and electronics industry for troubleshooting components, circuit boards, and PCBs. Mechanical engineering for shrink-fitting bearings and joining fits. Assembly and disassembly of temperature-critical connections.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for metal and electronic components. Do not use on surfaces above 50 °C. Avoid skin contact – risk of frostbite.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurised container: May burst if heated.; H280; H315 Causes skin irritation.; H317 May cause an allergic skin reaction.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 106 Chewing gum remover uses the same freezing effect but is designed for cleaning applications. Cooling spray is the technical variant for assembly and electronics.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386730368,"sku":"123-01","price":14.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823085523328,"sku":"123-06","price":82.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572386763136,"sku":"123-12","price":144.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823085556096,"sku":"123-24","price":265.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-crs-spray-rostumwandler-korrosionsschutz","title":"Cover CRS-Spray","description":"\u003cp\u003eCover CRS-Spray combines rust stabilizer, rust converter, and rust protection in one product. It chemically converts existing rust, improves paint adhesion, and, when applied correctly, provides immediate 100% protection against further corrosion. Crucially for practical use: the combination of active ingredients does not necessarily require a subsequent coat of paint – treated parts can be exposed to the elements without needing re-application. This saves an entire work step in daily maintenance. For touch-up work, the product can be applied over firmly adhering paint layers, eliminating the need for extensive stripping. Applicable to rusted and bare iron and metal parts.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRust conversion and rust protection in one step\u003c\/li\u003e\n\n\u003cli\u003eSubsequent coating not absolutely necessary\u003c\/li\u003e\n\n\u003cli\u003eApplicable over firmly adhering paint layers\u003c\/li\u003e\n\n\u003cli\u003eSignificantly improves the adhesion of subsequent coatings\u003c\/li\u003e\n\n\u003cli\u003eWeather-resistant without post-treatment\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eDo not apply in direct sunlight. Remove coarse rust with a wire brush, then spray Cover CRS-Spray thinly. Drying time before further processing at least 2 hours.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray thinly and evenly, not in direct sunlight.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\n\u003cp\u003eOne 400ml can treats approx. 3–5 m² of rusted surface.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eIndustry, steel constructions, metalworking companies, sewage and water treatment plants, construction industry, commercial vehicles, mast construction, agriculture, car workshops. Preservation of machinery, clearing equipment, clearing vehicles, refuse vehicles, and transport trucks.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFor iron and steel, rusted or bare. Can be applied over firmly adhering paint layers. Not for non-ferrous metals and aluminum.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572387254656,"sku":"144-01","price":15.8,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822884491648,"sku":"144-06","price":102.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572387287424,"sku":"144-12","price":178.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822884524416,"sku":"144-24","price":339.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"handrein-dry-handreiniger-wasserlos","title":"Hand Cleaning Dry","description":"\u003cp\u003eHandrein Dry solves the problem of hand cleaning at locations without a water connection – on construction sites, in mobile vehicle services, in road construction, or on the go in a vehicle. The product effortlessly removes oil, tar, printing ink, ink paste, paint residues, and grease by applying the cream dry to the hands and wiping off the dissolved dirt with a cloth, cleaning wool, or tissue. It is extremely gentle on the skin, re-greasing, clinically tested, not subject to labeling requirements, and environmentally friendly. Where water is available, it can also be washed off in the traditional way. For companies with mobile teams, Handrein Dry replaces improvised solutions such as brake cleaner on the skin – a real contribution to skin protection.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eWorks completely without water\u003c\/li\u003e\n\n\u003cli\u003eRemoves oil, tar, printing ink, and paint residues\u003c\/li\u003e\n\n\u003cli\u003eRe-greasing and clinically tested\u003c\/li\u003e\n\n\u003cli\u003eNot subject to labeling requirements\u003c\/li\u003e\n\n\u003cli\u003eIdeal for mobile teams and construction sites\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eHands should be dry before cleaning. Apply some Handrein Dry to hands without water and rub in well. Wipe off dissolved dirt with a cloth, cleaning wool, or tissue, or wash off with water.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eUndiluted, without water. Approx. 3–5 ml per application.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 500 ml can is sufficient for approx. 100–150 applications.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eCraft businesses, horticulture, road construction companies, workshops, mobile vehicle services, car repair shops, freight forwarders. Wherever no water is available for cleaning.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSkin application, re-greasing, clinically tested. Not subject to labeling requirements.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 225 HANDREIN BIO and Art. 224 Handrein 1 are the stationary variants with abrasive particles and water application. Handrein Dry is the mobile solution.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor sale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"12 x 500ml Can","offer_id":58572388630912,"sku":"226-12","price":185.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-multi-clean-fettloeser-konzentrat","title":"Covil Multi Clean","description":"\u003cp\u003eCovil Multi Clean is a water-miscible, highly concentrated safety solvent for stubborn grease-based dirt. The highly concentrated ingredients quickly and safely produce grease-free surfaces, without being extremely corrosive or toxic – for safety engineers and operations managers, this is the way to replace classic solvent chemicals in operations, without compromising cleaning performance. The product removes oil, wax, silicone, gummed oils, soot, atmospheric deposits, and brake dust. The wide range of dilution from 1:10 to 1:500 in high-pressure cleaners makes it a universal workshop concentrate: one container covers hand cleaning, spray application, and high-pressure use equally.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAlternative to hazardous solvent chemicals\u003c\/li\u003e\n\n\u003cli\u003eNot extremely corrosive or toxic with high cleaning performance\u003c\/li\u003e\n\n\u003cli\u003eDilutable from 1:10 to 1:500\u003c\/li\u003e\n\n\u003cli\u003eOne concentrate for manual, spray, immersion, and high-pressure application\u003c\/li\u003e\n\n\u003cli\u003eDissolves oil, wax, silicone, soot, and brake dust\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eHeavy soiling 1:10 with water, normal deposits 1:20 to 1:50, in high-pressure cleaner up to 1:500. Applicable by spray, wipe, or immersion method. Allow to act and rinse off.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003e1:10 (strong) to 1:50 (normal), HP device up to 1:500.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approx. 1,530 liters of application solution at 1:50; in an HP device at 1:500, approx. 15,000 liters.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eEntire industry, car workshops, forwarding agencies, bus companies, manufacturing plants, metal processing, civil engineering, mechanical engineering, warehouses, municipal depots, municipal utilities. Steel rims, construction machinery, heavily soiled engines, industrial trucks, forklifts, machines.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH 11, water-miscible. Gentle on skin and materials compared to solvent chemicals. On aluminum and non-ferrous metals, do not choose a dilution below 1:20.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH Value (Concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e11\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eC2Q0-8053-W00W-UK4H\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310 Immediately call a POISON CENTER\/doctor.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 257B Multi Clean Alka is the significantly stronger alkaline variant for extreme soiling. Art. 302 COVIL 8 is the non-water-miscible safety solvent for parts washers.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572391186816,"sku":"257A-0001","price":16.6,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572391219584,"sku":"257A-0012","price":167.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572391252352,"sku":"257A-0010","price":115.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canisters","offer_id":58572391285120,"sku":"257A-0030","price":321.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572391317888,"sku":"257A-0060","price":590.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-handrein-3-handwaschpaste-holzmehl","title":"Cover Hand Cleaner 3","description":"\u003cp\u003eCover Handrein 3 is a sand-free, wood flour-based hand cleaning paste that gently removes stubborn dirt such as grease, grime, oil, Molykote, paint, varnish, tar, resin, ink paste, stamp ink, and printing ink from hands. The sand-free aspect is the crucial point: mineral abrasives act like sandpaper on the skin over time and cause precisely the micro-injuries through which industrial substances can penetrate. Wood flour cleans actively in pores and grooves without destroying the skin barrier. The product also has a disinfectant effect, a pleasant fresh scent, and complies with the requirements of the German Social Accident Insurance Institution for the Machine Building and Metal Working Industries (Maschinenbau-Berufsgenossenschaft). Its biodegradability significantly exceeds legal requirements.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSand-free – no micro-injuries to the skin\u003c\/li\u003e\n\n\u003cli\u003eAbrasives made from wood flour, biodegradable\u003c\/li\u003e\n\n\u003cli\u003eRemoves tar, resin, varnish, and printing ink\u003c\/li\u003e\n\n\u003cli\u003eAdditional disinfecting effect\u003c\/li\u003e\n\n\u003cli\u003eComplies with the conditions of the Maschinenbau-BG\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eRub a cherry-sized amount into wet hands with usual washing motions and wash hands thoroughly. Rinse off dissolved dirt with clear water. Afterwards, apply skin care (Art. 171 COVIL Cream).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eUndiluted. Cherry-sized amount per wash (approx. 4–5 ml).\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 10-liter container is sufficient for approx. 2,000–2,500 washes.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAll industrial and craft businesses with contact to oil, Molykote, paint, varnish, tar, resin, ink paste, stamp ink, and printing ink. Also suitable for gardening.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH 7, skin application. Sand-free, wood flour-based. Complies with the conditions of the Maschinenbau-Berufsgenossenschaft.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS05 Corrosion, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H302 Harmful if swallowed.; H315 Causes skin irritation.; H318 Causes serious eye damage.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 225 HANDREIN BIO also uses biological abrasives but is milder in dosage. Art. 226 HANDREIN Dry works without water. Art. 222 Hand Wash Cream is the mild variant without abrasives.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor sale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572393185664,"sku":"277-0010","price":93.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-8-sicherheitsloesemittel-kaltreiniger","title":"Covil 8","description":"\u003cp\u003eCovil 8 is a safety solvent made from a mixture of synthetic isoparaffins in the isoaliphatic range. As a non-polar compound, it is water-insoluble, miscible with most solvents in any proportion, and biodegradable. The decisive difference to classic cold cleaners lies in its aromatic-free nature: the odor is exceptionally mild, making spraying and misting practical in workshops and halls. Covil 8 is demulsifying, does not combine with water, and can be separated at any time via an oil separator; the product is considered slightly hazardous to water, and its evaporation number is 82. Glass, metal, paints, and plastics are not attacked. Depending on the environment, corrosion protection of approximately 8 to 14 days remains on the cleaned surface, which is advantageous for maintenance work with subsequent downtime. Please note the hazardous substance classification with the signal word Danger (H226, H304, H336).\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAromatic-free and thus exceptionally mild in odor\u003c\/li\u003e\n\n\u003cli\u003eDemulsifying, separation via oil separator possible\u003c\/li\u003e\n\n\u003cli\u003eCorrosion protection for approximately 8 to 14 days\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack glass, metal, paints, and plastics\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable according to DIN, slightly hazardous to water\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eUse Covil 8 undiluted by immersion, spraying, or wiping. Wet contaminated parts or surfaces, allow the solvent to act on the contamination, and let the dissolved grease, tar, and resin residues drain off or wipe them away. Repeat the process for heavy contamination. Due to the H226 classification, only work away from ignition sources and ensure adequate ventilation; observe H304, do not ingest by swallowing, H336 may cause drowsiness or dizziness. Wear respiratory protection when misting. Dispose of residues via the oil separator or industrial disposal.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eApproximately 100 to 200 ml per m² of heavily greased surface are required for wiping; a 30-liter canister is thus sufficient for approximately 150 to 300 m². In an immersion bath, the solvent can be reused multiple times until saturation. Practical guidelines, the data sheet does not specify consumption.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eCleaning of engines, machines, and systems with heavily greased surfaces, as well as removal of tar, gummed oils and greases, wax and preservatives, combustion residues, heavy oil, resin, and bitumen in maintenance, workshops, and vehicle fleets.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eDoes not attack glass, metal, paints, and plastics. Since the product dissolves waxes and preservatives, intended protective layers must be taken into account before application. For sensitive elastomers and seals, test a small area beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI number\u003c\/td\u003e\n\n\u003ctd\u003e1XT0-106Y-Q005-MXCE\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH phrases:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P370+P378; P403+P233 Store in a well-ventilated place. Keep container tightly closed.; P403+P235\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCovil 8 is the standard safety solvent for grease and oil residues. Covil 100\/S (Art. 307) is additionally electrolyte-free and thus designed for control cabinets, Covil 35 (Art. 332) is significantly more aggressive, dissolves combustion residues in heat exchangers and attacks unbaked paints.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572395217280,"sku":"302-0001","price":20.5,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572395250048,"sku":"302-0012","price":206.0,"currency_code":"EUR","in_stock":true},{"title":"10-liter canister","offer_id":58572395282816,"sku":"302-0010","price":142.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572395315584,"sku":"302-0030","price":396.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572395348352,"sku":"302-0060","price":728.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-br-liquid-bremsenreiniger-teerloeser","title":"Cover BR Liquid","description":"\u003cp\u003eCover BR Liquid is a safety solvent for rapid degreasing in workshops and maintenance. It removes residues of sealing material from sealing surfaces and flange connections, dissolves tar and rubber abrasion from solvent-resistant surfaces, and eliminates adhesive residues, dispersion paint residues, and stains from carpets and seats. This means that, in addition to classic brake cleaning, the product also covers tasks for which several special agents would otherwise be required. Cover BR Liquid degreases and cleans metal, glass, ceramics, and many plastics, and dissolves resinified residues. As a liquid in a canister, it is significantly more economical per application compared to aerosol cans and can be dispensed via a spray bottle, immersion bath, or cloth. The product is classified as highly flammable (including H225, H304, H315, H319); ignition sources must be kept away and ventilation must be ensured.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDissolves sealing residues on flanges and sealing surfaces\u003c\/li\u003e\n\n\u003cli\u003eRemoves tar, rubber abrasion, and adhesive residues\u003c\/li\u003e\n\n\u003cli\u003eLiquid in a canister instead of expensive aerosol cans\u003c\/li\u003e\n\n\u003cli\u003eDegreases metal, glass, ceramics, and many plastics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray contaminated parts with Cover BR Liquid and allow the active ingredient to run off together with the dissolved contamination. Then allow the parts to air dry or wipe them with a dry cloth. Repeat the process for heavy soiling. Before use on plastics and painted surfaces, test in an inconspicuous area. Work only in well-ventilated areas and away from ignition sources; wear protective gloves and safety glasses. Use a drip tray and dispose of residues via the oil separator or company disposal system.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eApproximately 200 to 300 ml are required per brake cleaning on one axle; a 30-liter canister is therefore sufficient for approximately 100 to 150 axle cleanings. Practical guideline, the data sheet does not specify consumption.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAutomotive workshops, car dealerships, bus companies, freight forwarders, municipal utilities, industry, construction and agricultural machinery manufacturing and maintenance, shipping, and construction companies. Specifically for cleaning cylinders, clutch linings and parts, drum and disc brakes, brake pads, brake shoes, gasoline and oil pumps, transmissions, carburetors, springs and bushings, and for tar removal from painted surfaces.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eDegreases and cleans metal, glass, ceramics, and many plastics. Plexiglas, thermoplastics such as PVC, and simple paint coatings are dissolved and must be excluded. Before use on painted surfaces, create a test area.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H225Fl; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H315Causes; H319 Causes serious eye irritation.; H319Causes; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P301; P303; P304; P305; P310 Immediately call a POISON CENTER\/doctor.; P338; P340; P351\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCover BR Liquid is the liquid variant for continuous demand in a canister, Cover-BR (Art. 104) is available as an aerosol for specific applications on the vehicle. Covil 8 (Art. 302) has a milder odor and is more designed for large-area degreasing. Note: This data sheet is issued for variant Art. 3040002 (Covil Fleck-Ex); the information must be checked before publication.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572395446656,"sku":"304-0001","price":25.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572395479424,"sku":"304-0012","price":260.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572395512192,"sku":"304-0010","price":180.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572395544960,"sku":"304-0030","price":501.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572395577728,"sku":"304-0060","price":922.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"trennax-ms-trennmittel-gleitmittel-offen","title":"TRENNAX-MS open","description":"\u003cp\u003eTRENNAX-MS is a silicone-based release and lubricant agent available as bulk goods, meaning it's for application with a spray gun, brush, or cloth instead of an aerosol can. The product is physiologically harmless and non-toxic, has antistatic and anticorrosive properties, and combines release, lubricating, and care properties in one formulation. The ignition temperature is above 300 degrees Celsius. The technical difference from canned goods primarily lies in cost-effectiveness and application versatility: Bulk goods can be dispensed into dipping tanks, spray systems, or refill systems, which reduces costs per application for high consumption and significantly less packaging waste. In plastics, rubber, foam, and textile processing, the silicone film ensures clean demolding without sticking to tools and molded parts. In maintenance and workshop areas, the product lubricates without dripping or sticking, so that locking systems, wood and plastic mechanisms, blinds, awnings, and zippers remain functional. On tarpaulins, leather, tents, boats, and construction vehicles, the film also acts as a care and protective layer. For businesses, this means less rework on molded parts and reduced susceptibility to malfunctions in moving components.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSilicone film separates and lubricates without dripping or sticking\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature over 300 degrees Celsius\u003c\/li\u003e\n\n\u003cli\u003eAntistatic and anticorrosive properties\u003c\/li\u003e\n\n\u003cli\u003ePhysiologically harmless and non-toxic\u003c\/li\u003e\n\n\u003cli\u003eBulk goods reduce costs per application compared to aerosol\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean and dry surfaces before treatment. Spray TRENNAX-MS thinly and evenly from a distance of 30 to 50 centimeters or apply with a cloth or brush. A thin, continuous film is sufficient; too much application leads to greasy shine and adhesion. When used as a care product, polish after a short flash-off time to increase shine. Do not use on surfaces that are to be painted, glued, or printed afterwards, as silicone residues impair adhesion. When spray applying, ensure adequate ventilation, keep away from ignition sources, and do not inhale spray mist. Wear protective gloves and eye protection.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Spray thinly from a distance of 30 to 50 centimeters or apply with a cloth.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eWith thin spray application, approximately 30 to 60 milliliters cover about one square meter of tool or mold surface. One liter is therefore sufficient for about 20 to 30 square meters or several hundred individual applications on locks and mechanisms, depending on the application technique.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003ePlastics, rubber, foam, and textile processing, foundry and welding technology, paper and printing industry, locksmiths, automotive workshops, furniture manufacturing, leather processing, tent and tarpaulin manufacturing, boat building. Furniture, plastic surfaces, leather, tents and tarpaulins, rot strips, boats, diving equipment, blinds, awnings, mechanical locking systems, as well as excavators, clearing vehicles, and other construction vehicles are maintained and lubricated.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eCan be used on plastic, rubber, foam, textile, leather, wood, metal, and painted components. Not suitable for surfaces that are subsequently to be painted, glued, printed or coated, as the silicone film impairs the adhesion of paints and adhesives.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapour.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P370+P378; P403+P233 Store in a well-ventilated place. Keep container tightly closed.; P403+P235\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eActive ingredient identical to Trennax-MS (Art. 110), which is intended as an aerosol can for targeted applications and service vehicles. Where silicone residues are problematic, for example before painting or gluing processes, Trennax OS (Art. 111) is the suitable alternative.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572397052288,"sku":"316-0001","price":30.1,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572397085056,"sku":"316-0012","price":302.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572397117824,"sku":"316-0010","price":209.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572397150592,"sku":"316-0030","price":582.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572397183360,"sku":"316-0060","price":1071.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-21-elektroreiniger-nichtleitend","title":"COVER 21","description":"\u003cp\u003eCOVER 21 is a water-free high-performance cleaner for electric motors, as well as electrical and mechanical systems. Since the product contains no electrolytes and is water-free, it remains non-conductive and can be processed under voltage. The dielectric strength is 28,000 volts, and the electrical conductivity at 20 degrees Celsius is below 10 s\/cm. The crucial difference to aqueous industrial cleaners is that no disassembly, no drying time, and no subsequent rinsing are required: COVER 21 evaporates without residue, with an evaporation rate of 21. Insulating varnishes, paint, rubber, plastics, glass, ceramics, and metals are not attacked. The odor is exceptionally mild, which facilitates use in workshops and control room environments. Due to its creeping ability of 0.726, the product is also used as a crack testing medium. Greases and dirt, for example on transmission poles of generators, are quickly dissolved. For companies, this means shorter downtimes for maintenance, as components can be cleaned on-site and immediately put back into operation.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDielectric strength up to 28,000 volts\u003c\/li\u003e\n\n\u003cli\u003eWater-free and electrolyte-free, can be processed under voltage\u003c\/li\u003e\n\n\u003cli\u003eEvaporates without residue, no rinsing required\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack insulating varnishes and plastics\u003c\/li\u003e\n\n\u003cli\u003eCan also be used as a crack testing medium\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray soiled parts evenly and wipe off the dissolved dirt. Alternatively, use a cloth soaked with COVER 21 and manually rinse or wipe the components. Then allow to evaporate completely; no post-rinsing with water is required. Before restarting live parts, wait for visible dryness. The product is flammable and can be fatal if swallowed and enters the airways. Work only in well-ventilated areas, do not inhale spray mist, keep away from ignition sources, and wear solvent-resistant protective gloves and eye protection. The relevant electrical safety rules for working on live systems must be observed.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Use neat by spraying or wiping.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eExperience shows that 30 to 50 milliliters are needed per motor, control cabinet, or assembly. A 1-liter bottle is therefore sufficient for about 20 to 30 individual cleanings, a 30-liter canister for about 600 to 1,000 applications.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eGenerators, alternators, insulators, electric motors and electrical systems. Also air conditioners, televisions, radio and computer technology, circuit boards, traffic lights and signaling equipment, capacitors, windings, motors, measuring instruments and control cabinets. Additional use as a crack testing medium.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eInsulating varnishes, paint, rubber, plastics, glass, ceramics and metals are not attacked. As this is a solvent product, a preliminary test on a hidden area is advisable for sensitive plastics and fresh coatings. Not water-based, therefore no mixing with aqueous cleaning solutions.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS08 Health hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H304 May be fatal if swallowed and enters airways.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCOVER 32 (Art. 319) is the higher-quality variant with 52,000 volts dielectric strength, CFC- and HCFC-free, and biodegradable, recommended for higher voltages. COVER 21 (Art. 318) evaporates faster and is the economical choice for ongoing motor and control cabinet cleaning.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572398526848,"sku":"318-0001","price":19.8,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572398559616,"sku":"318-0012","price":199.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572398592384,"sku":"318-0010","price":138.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572398625152,"sku":"318-0030","price":384.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572398657920,"sku":"318-0060","price":706.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-35-kaltreiniger-bitumen-teer","title":"COVIL 35","description":"\u003cp\u003eCOVIL 35 is a special cold cleaner based on a multi-component mixture in the isoaliphatic range. As a non-polar compound, the product is water-insoluble and demulsifying, so that separation via an oil separator remains possible at all times, simplifying its use in workshops with separator systems. The evaporation rate is 35, the water hazard class is 2, and it is an A-II product. Its particular strength lies in the internal cleaning of heat exchangers: combustion residues 5 to 10 millimeters thick are dissolved in 30 to 35 minutes without mechanical processing; the heat exchanger is filled, the dwell time is awaited, and the dissolved deposits are then flushed out. In addition, COVIL 35 dissolves tar and bitumen from solvent-resistant surfaces, as well as oil carbon, resinified oils and greases, PE waxes, preservatives, heavy oil, resin, microwaxes, rosin, epoxy resin, alkyd resin, polyurethane, and acrylates. The product dries residue-free after airing and has a mild odor, which facilitates spraying and misting.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDissolves 5 to 10 millimeters of combustion residues without mechanical action\u003c\/li\u003e\n\n\u003cli\u003eDemulsifying, separable via oil separator\u003c\/li\u003e\n\n\u003cli\u003eDries residue-free after airing\u003c\/li\u003e\n\n\u003cli\u003eMild odor, good for spraying and misting\u003c\/li\u003e\n\n\u003cli\u003eDissolves tar, bitumen, oil carbon, resins, and PU foam\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eUse undiluted by immersion, spraying, or wiping. For heat exchanger cleaning, fill the interior with COVIL 35, let it soak for 30 to 35 minutes, and then remove the dissolved deposits by flushing. For surfaces with tar and bitumen adhesion, spray on, let it soak, and then remove the dissolved coating. Caution: The product dissolves non-baked-on lacquers; for painted components, first test in an inconspicuous area. Liquid and vapor are flammable; the product can be fatal if swallowed and enters the airways, causes skin irritation and serious eye damage. Keep away from ignition sources, ensure adequate ventilation, wear solvent-resistant gloves and safety goggles.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Use undiluted by immersion, spraying, or wiping.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eFor heat exchanger cleaning, the requirement depends on the internal volume; a 30-liter canister fills a proportionally sized exchanger. For surface cleaning, approximately 0.2 to 0.3 liters per square meter is sufficient, meaning a 10-liter canister covers about 30 to 50 square meters of heavily greased surfaces.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eInteriors of heat exchangers, engines, machines and systems with heavily greased surfaces, printing rollers, printing blankets, clichés and screens, as well as surfaces with tar and bitumen adhesion.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor all solvent-resistant surfaces and metals. Caution: Non-baked-on lacquers are dissolved, as are preservatives, PE waxes, and various resins. Do not use on sensitive plastics, rubber, and freshly painted components without prior testing. Demulsifying, therefore separable via an oil separator.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e3HW0-60WV-W001-F5UC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H335 May cause respiratory irritation.; H336 May cause drowsiness or dizziness.; H360D\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P241 Use explosion-proof electrical\/ventilating\/lighting equipment.; P243; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P301; P310 Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eASPHALT-EX WM (Art. 339) is the water-miscible version, which can be rinsed off and is intended for vehicles and tools in road construction. COVIL 35 (Art. 332) is water-insoluble and a stronger solvent, especially for heat exchangers and printing technology. COVIL 35-K (Art. 332K) is the version as an adhesive remover.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572399903104,"sku":"332-0001","price":22.2,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572399935872,"sku":"332-0012","price":223.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572399968640,"sku":"332-0010","price":154.5,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572400001408,"sku":"332-0030","price":429.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572400034176,"sku":"332-0060","price":789.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"farbloeser-extra-farbentferner-dispersionsfarben","title":"COLOR SOLVENT extra","description":"\u003cp\u003eFARBLÖSER extra removes acrylic coatings and oil paints, felt-tip pen stains, emulsion paints, and varnishes from all water, alkali, and solvent-resistant materials such as stone, plastic, or glass. The key difference compared to traditional paint removers lies in its safety and work profile: the product is non-toxic, non-flammable, has an almost imperceptible odor, and contains no environmentally harmful solvents. Additionally, there's a process-related advantage: FARBLÖSER extra does not evaporate. As long as moisture is present on the surface, its dissolving activity remains fully effective, allowing even thick or multi-layered coatings to be permeated in a single step without constant reapplication. Besides removing old coatings, the product is suitable for cleaning dried brushes, lambskin rollers, and paint-smeared tools, as well as for cleaning production facilities and paint containers in paint and varnish manufacturing. It also removes plastic and paper stickers as well as shoe scuffs. For businesses, this means fewer tool losses and less effort for ventilation and fire protection measures.\u003c\/p\u003e\u003ch3\u003eYour benefits at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDoes not evaporate, dissolving activity remains fully effective\u003c\/li\u003e\n\n\u003cli\u003eNon-toxic and non-flammable\u003c\/li\u003e\n\n\u003cli\u003eFree from environmentally harmful solvents\u003c\/li\u003e\n\n\u003cli\u003eAlmost imperceptible odor, suitable for indoor use\u003c\/li\u003e\n\n\u003cli\u003eCleans dried brushes and lambskin rollers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eApply FARBLÖSER extra undiluted with a cloth, sponge, or brush, or a sprayer depending on the area of application, and allow it to act until the paint or dirt deposit is dissolved. Then rinse or wash off with clear water. If this is not possible, remove the dissolved paint with cloths for scratch-sensitive surfaces, or with steel or fiber brushes for scratch-resistant surfaces. For multiple layers of paint, repeat the process. Clean residues on absorbent surfaces with COVIL M-3. Ensure fresh air supply in enclosed spaces. Before use, perform a test application in an inconspicuous area to check material compatibility. The product is harmful if swallowed, irritates the skin, and causes serious eye damage, so wear protective gloves and eye protection.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply neat with a cloth, sponge, brush, or sprayer.\u003c\/p\u003e\u003ch3\u003eConsumption and coverage\u003c\/h3\u003e\u003cp\u003eFor soaking through one layer of paint, approximately 0.2 to 0.4 liters per square meter are required, depending on the absorbency of the substrate. A 1-liter bottle thus covers about 3 to 5 square meters, a 30-liter canister about 75 to 150 square meters. For tool cleaning, a few milliliters per brush are sufficient.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eRemoval of old coatings on stone, plastic and glass, cleaning of dried brushes, lambskin rollers and paint-smeared tools, cleaning of production facilities in paint and varnish manufacturing including paint containers, as well as removal of plastic and paper stickers and shoe scuffs.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eCan be used on all water, alkali and solvent-resistant materials such as stone, plastic and glass. Not suitable for substrates whose coating is to be preserved, as even intact coatings will be dissolved. Before use, perform a test application in an inconspicuous area. Clean residues on absorbent surfaces with COVIL M-3.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS05 Corrosion, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H302 Harmful if swallowed.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P302+P352 IF ON SKIN: Wash with plenty of water and soap.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310 Immediately call a POISON CENTER\/doctor.; P501 Dispose of contents\/container to approved waste disposal.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eThe Dispersion Paint Remover (Art. 280) specializes in emulsion paints, CM 51 Cold Paint Stripper (Art. 654) and CM 51 Cold Paint Stripper Gel (Art. 607) work much more aggressively for baked-on industrial paints. FARBLÖSER extra (Art. 334) is the solvent-free, non-flammable option for mixed paint layers and tool cleaning.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 litre bottle","offer_id":58572400198016,"sku":"334-0001","price":22.6,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572400230784,"sku":"334-0012","price":228.0,"currency_code":"EUR","in_stock":true},{"title":"10 L container","offer_id":58572400263552,"sku":"334-0010","price":157.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572400296320,"sku":"334-0030","price":438.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572400329088,"sku":"334-0060","price":806.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"li-grundreiniger-linoleum-pvc-versiegelung","title":"LI - Basic Cleaner","description":"\u003cp\u003eLI BASIC CLEANER is a special basic cleaner for linoleum and PVC, as well as for sealed parquet and sealed concrete floors. It removes old dirt and encrustations without leaving stains, and removes polymer coatings, acrylic coatings, wax, grease, and other stubborn deposits. The pH value of the undiluted product is 9, making it significantly milder than highly alkaline basic cleaners, which allows it to be used on alkali-sensitive linoleum-type floor coverings without damaging the surface. Excellent cleaning performance is also achieved after dilution with water, so that the dosage can be adjusted to the layer structure and the chemical consumption per square meter remains calculable. For properties with regular basic cleaning, this means plannable renovation intervals because accumulated care product layers can be completely removed and then reapplied. In case of extreme encrustations, the basic cleaner can be applied undiluted; in this case, the loosened dirt must be immediately absorbed with plenty of water.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eRemoves polymer and acrylic coatings as well as wax\u003c\/li\u003e\n\n\u003cli\u003epH value 9, gentle and suitable for linoleum\u003c\/li\u003e\n\n\u003cli\u003eRemoves encrustations without staining\u003c\/li\u003e\n\n\u003cli\u003eEffective even after dilution up to 1:10\u003c\/li\u003e\n\n\u003cli\u003eCan be used undiluted for extreme soiling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eDilute LI BASIC CLEANER 1:3 to 1:10 with water, spread on the floor, and let it work briefly. Then absorb the loosened dirt and rinse thoroughly with clear water. For extreme encrustations, it can be applied undiluted, in which case the cleaner must be immediately absorbed with plenty of water after the dirt has dissolved. Afterwards, the floor can be re-treated with floor polish or POLYGLANZ. The product is harmful if swallowed and in contact with skin, causes skin irritation and serious eye damage. Wear protective gloves, safety glasses and suitable work clothing, secure against slipping due to wet surfaces.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003e1:3 to 1:10 with water. For extreme encrustations, use undiluted, then immediately absorb with plenty of water.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eOne liter of concentrate, when diluted 1:10, yields approximately 11 liters of basic cleaning solution. Assuming approximately 20 liters of solution per 100 square meters, one liter covers approximately 55 square meters, and at 1:3, approximately 20 square meters of heavily soiled area.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eLinoleum, PVC, sealed parquet and sealed concrete floors in schools and kindergartens, gymnasiums, hotels and guesthouses, hospitals and nursing homes, industrial plants, gastronomy, municipal utilities, banks, insurance companies and office buildings.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for linoleum, PVC, sealed parquet and sealed concrete floors. Do not use on unsealed wood, absorbent natural stone and alkali-sensitive coatings without prior testing. When used in concentrated form, keep contact time short and remove immediately.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e9\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS05 Corrosion, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H302 Harmful if swallowed.; H312 Harmful in contact with skin.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H332 Harmful if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P264 Wash hands thoroughly after handling.; P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305; P313; P337; P338; P351\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eBasic cleaner PW (Art. 219) is the stronger alkaline polymer and wax remover for insensitive hard floors. LI Basic Cleaner (Art. 343) with a pH of 9 is the gentler choice for linoleum and sealed floor coverings. After basic cleaning, re-application with Cover Acryl (Art. 218) or POLYGLANZ (Art. 340) follows.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572402622848,"sku":"343-0001","price":16.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572402655616,"sku":"343-0012","price":170.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572402688384,"sku":"343-0010","price":117.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572402721152,"sku":"343-0030","price":327.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572402753920,"sku":"343-0060","price":601.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"holz-oel-holzschutz-naturholz-aussen","title":"Wood Oil","description":"\u003cp\u003eWood oil is a specialized chemical-technical product for refreshing weathered wood indoors and outdoors. It penetrates unvarnished wood surfaces, restores the original natural color to grayed surfaces, and simultaneously creates a protective film against weathering. According to the data sheet, traces of weathering, small scratches, water stains, and dull spots disappear quickly, giving the treated wood an almost new appearance. The technical difference from pure wood cleaners is that wood oil does not remove material but rather replenishes and preserves it: the surface is nourished instead of sanded down. For businesses, this means that doors, door frames, fences, garden furniture, carports, and balcony cladding can be maintained without extensive sanding or painting. The application is thin and can be done with a cloth, brush, or spray method, so even larger areas can be treated in a manageable amount of time. Since the product is supplied ready for use, mixing and dosage control are eliminated, and maintenance intervals can be planned into ongoing property management.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eRestores grayed wood to an almost new appearance\u003c\/li\u003e\n\n\u003cli\u003eRefreshment and weather protection in one step\u003c\/li\u003e\n\n\u003cli\u003eApplication with cloth, brush, or spray method\u003c\/li\u003e\n\n\u003cli\u003eReady to use, no mixing or dosage control\u003c\/li\u003e\n\n\u003cli\u003eCan be used for both indoor and outdoor wood\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eClean the substrate before treatment and let it dry completely; de-gray heavily grayed areas beforehand. On smooth wood surfaces, apply wood oil evenly and thinly with a lint-free cloth, then gently polish if necessary. For outdoor use, application with a brush or spray method is also possible. For highly absorbent substrates, a second coat can be applied after the first drying. Remove excess material with a clean cloth or polish in\/out to prevent sticky spots. Allow oil-soaked cloths to dry spread out due to the risk of self-ignition or dispose of them safely. Before using on valuable items, create a test area.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eWith the thin application specified in the data sheet, approximately 8 to 12 m² per liter can be expected; a 10-liter container thus covers about 80 to 120 m². For highly absorbent wood and a second coat, the area is halved accordingly.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eNatural wood floors, doors and door frames, fences, garden furniture, carports, balcony and facade cladding, as well as other unvarnished wood components indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eApplicable to almost all unvarnished wood surfaces indoors and outdoors. Not intended for painted, sealed, or foil-coated surfaces, as the oil cannot penetrate there. Before treating sensitive or richly colored woods, create a test area.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe wood de-grayer (Art. 352) prepares heavily grayed surfaces before oil treatment, while wood oil then provides refreshment and protection. For mineral substrates such as natural stone or concrete, Stonefix (Art. 276) or Color Intensifier Nano (Art. 359) is intended instead of wood oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 liter bottle","offer_id":58572403212672,"sku":"353-0001","price":22.3,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L bottles","offer_id":58572403245440,"sku":"353-0012","price":224.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572403278208,"sku":"353-0010","price":155.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572403310976,"sku":"353-0030","price":432.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572403343744,"sku":"353-0060","price":795.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cm-51-kaltentlacker-gel-lackentferner","title":"CM 51 Cold Stripper Gel","description":"\u003cp\u003eCM 51 Cold Stripping Gel quickly and reliably removes even resistant coatings. These include oil, nitrocellulose, synthetic resin and chlorinated rubber paints, interior and exterior dispersion paints, facade paints, sealing paints, fillers, polishes, powder coatings and PU lacquers. According to the data sheet, the effect extends to lacquers baked at 180 degrees Celsius. The technical difference to liquid paint removers lies in the gel form: The product remains on vertical surfaces and profiles, dries out more slowly and keeps the active ingredient in contact with the coating for the entire exposure time of up to 30 minutes. In most cases, one application is sufficient. For businesses, this means short cycle times in component preparation, economical consumption per square meter and the avoidance of thermal or mechanical removal with the risk of component damage. The application range extends from component preparation in metal construction and surface technology to the renovation of facade and interior paints. After removing the old paint, the substrate must be thoroughly cleaned; the clean and dry substrate can be recoated immediately.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEffective even on lacquers baked at up to 180 degrees\u003c\/li\u003e\n\n\u003cli\u003eGel form adheres to vertical surfaces and profiles\u003c\/li\u003e\n\n\u003cli\u003eUsually one application is sufficient, exposure time up to 30 minutes\u003c\/li\u003e\n\n\u003cli\u003eRemoves powder coatings, PU lacquers and chlorinated rubber\u003c\/li\u003e\n\n\u003cli\u003eSubstrate can be recoated immediately after cleaning\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eApply CM 51 evenly with a solvent-resistant brush and leave to act for up to 30 minutes. Then scrape off the dissolved layer with a spatula or wash off with a high-pressure device and water. For extremely thick layers, a repeated application may be necessary. Paint residues on corners and profiles are best removed with steel wool or a wire brush. After paint removal, the substrate must be thoroughly cleaned; the clean and dry substrate can be recoated immediately. For sensitive surfaces and intensely colored stones and tiles, a preliminary test should be carried out in an inconspicuous area. Do not allow to enter wastewater; observe local wastewater regulations. Wear safety goggles, protect eyes and skin, wash off splashes immediately with water, ensure good ventilation in enclosed spaces. Observe safety data sheet.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply undiluted to the surface to be stripped.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eThe data sheet indicates a very economical consumption without stating specific values. Experience shows that for gel paint removers, approximately 300 to 500 grams per square meter and application should be assumed, meaning a 10 kg container is sufficient for about 20 to 33 square meters. For multi-layered old paint, calculate accordingly higher.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003ePaint removal from metal components, machine parts, frames and trusses from powder coating, steel constructions, gates and railings, as well as facade and interior paints during renovation work.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor solvent-resistant, strippable substrates. For sensitive surfaces and intensely colored stones and tiles, a preliminary test in an inconspicuous area is absolutely necessary to check material compatibility. Do not allow to enter wastewater; local wastewater regulations must be observed.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCM 51 Cold Stripping Gel (Art. 607) is the thixotropic gel variant of the liquid CM 51 Cold Stripping Agent (Art. 654) and is useful when vertical surfaces or profiles need to be stripped. For mineral substrates and natural stone, WENDRO-GEL (Art. 651) as an alkaline stripping paste is the gentler alternative.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"11 kg canister","offer_id":58572413895040,"sku":"607-0011","price":183.5,"currency_code":"EUR","in_stock":true},{"title":"33 kg canister","offer_id":58572413927808,"sku":"607-0033","price":507.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"siloxan-w-290-steinimpraegnierung-hydrophob","title":"Siloxane W 290","description":"\u003cp\u003eSILOXAN W 290 is a solvent-based natural and artificial stone impregnating agent based on oligomeric siloxanes for hydrophobing mineral building materials. The product can be used on natural and artificial stone, concrete, aerated concrete, sand-lime brick, brickwork, unglazed pottery, fiber cement, mineral plasters, and mineral paint coatings. The decisive technical point is its function as an impregnation, not as a sealant: The capillaries are not sealed but narrowed. This prevents water molecules from penetrating the substrate, while smaller water vapor molecules continue to escape from the stone. The building component remains diffusion-open, preventing damage from trapped moisture. SILOXAN W 290 hydrolyzes under atmospheric humidity and condenses into a non-tacky polysiloxane with very high penetration depth, extremely high alkali resistance, and high aging resistance. For businesses, this means slower weathering, prevented efflorescence, less mold, algae, and moss formation, and longer cleaning intervals on facades. Application is done by spraying, brushing, or dipping in at least two wet-on-wet coats, as effective hydrophobization is only achieved with substrate-saturating application.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eVery high penetration depth with substrate-saturating application\u003c\/li\u003e\n\n\u003cli\u003eExtremely high alkali resistance and high aging resistance\u003c\/li\u003e\n\n\u003cli\u003eNon-tacky drying without optical change\u003c\/li\u003e\n\n\u003cli\u003eDiffusion-open, narrows capillaries instead of sealing them\u003c\/li\u003e\n\n\u003cli\u003eAlso applicable on damp, absorbent substrates\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eApply SILOXAN W 290 by spraying, brushing, or dipping. Application must be done in at least two coats, working very generously and evenly wet-on-wet. Effective hydrophobization is only achieved with substrate-saturating application. Consumption depends on the absorbency of the substrate and is empirically between 100 and 250 milliliters per square meter, and in extreme cases even more. Sufficiently dimensioned test areas provide information about quantity and effect, especially on differently absorbent substrates such as shell limestone. Application on damp but absorbent substrates is possible. The product is harmful if swallowed and in contact with skin, can be fatal if swallowed and enters airways, and causes skin irritation. Ensure good ventilation, keep away from ignition sources, and wear personal protective equipment.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply in at least two wet-on-wet coats until substrate saturation.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eConsumption varies between 100 and 250 milliliters per square meter, depending on absorbency. A 10-liter container thus covers approximately 40 to 100 square meters, a 30-liter container about 120 to 300 square meters. For highly absorbent substrates, the value can be significantly exceeded.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eNatural and artificial stone facades, exposed concrete and aerated concrete, sand-lime brick and brickwork, unglazed pottery, fiber cement panels, mineral plasters, and mineral paint coatings on buildings, monuments, retaining walls, and outdoor facilities.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for mineral, absorbent building materials of all kinds. Application on damp but absorbent substrates is possible. Do not use as a sealant and do not apply to non-absorbent or already densely coated substrates, as complete insulation by incorrect impregnation can destroy the substrate. Create a test area, especially for differently absorbent shell limestone.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H302 Harmful if swallowed.; H304 May be fatal if swallowed and enters airways.; H312 Harmful in contact with skin.; H315 Causes skin irritation.; H332 Harmful if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301; P310 Immediately call a POISON CENTER\/doctor.; P330; P331\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eSILOXAN W 290 (Art. 650) is the solvent-based impregnating agent with high penetration depth for heavily stressed mineral substrates. Steinfix (Art. 276) covers stone impregnation in the standard range, Steinfestiger OH (Art. 696) is designed for solidifying crumbling substrates. Price and container information is not available; check information before publication.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572414157184,"sku":"650-0001","price":24.8,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572414189952,"sku":"650-0010","price":160.0,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572414222720,"sku":"650-0030","price":441.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"alunal-aluminiumreiniger-eloxal-fassade","title":"ALUMNI ASSOCIATION","description":"\u003cp\u003eALUNAL is a special cleaner for facades and other building components made of anodised and aluminium, designed for anodically oxidised surfaces and aluminium alloys in construction. The concentrate is particularly effective against greasy and oily dirt. The technical difference to universal cleaners lies in the formulation: In addition to anionic-non-ionic surfactants with high dirt-dissolving and dispersing capabilities, ALUNAL contains complexing agents against scale formation and white tarnishing, protective colloids, stabilisers and dispersing agents for the detached dirt particles, as well as corrosion inhibitors to prevent attack on anodised and aluminium. With a pH value of 7.5 to 8, it is within the reference values of the Aluminiumzentrale (Aluminium Centre). For contractors, this means a predictable cleaning of high-quality facade elements without white tarnishing or staining, thus without the risk of costly rework on visible components. Subsequent preservation with ALU-CON gives the facade a uniform appearance and a protective film against aggressive pollutants.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCorrosion inhibitors protect anodised and aluminium\u003c\/li\u003e\n\n\u003cli\u003epH 7.5 to 8 according to Aluminiumzentrale guidelines\u003c\/li\u003e\n\n\u003cli\u003eComplexing agents prevent scale formation and white tarnishing\u003c\/li\u003e\n\n\u003cli\u003eDissolves greasy and oily dirt on facades\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eDilute ALUNAL with water depending on the degree of soiling, apply and allow to act briefly. Rubbing with a cleaning cloth, nylon pad or similar increases the cleaning effect. Then rinse thoroughly with water; high-pressure cleaners are also suitable for application and rinsing. Do not allow the cleaner to dry on the surface and always work section by section. For more stubborn dirt, ALUNAL S is provided as an enhancement. After cleaning, preservation with ALU-CON is recommended, which forms a protective film to ward off aggressive pollutants and dirt. Wear protective gloves and safety glasses and check material compatibility on a sample area in advance for unknown alloys or coatings.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eDilute with water depending on the degree of soiling; determine ratio using a sample area\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eWith approximately 150 ml of application solution per square metre of facade area, a 10-litre canister, depending on the chosen dilution, is sufficient for several hundred square metres of aluminium and anodised surfaces.\u003c\/p\u003eAreas of Application\u003cp\u003eAluminium and anodised facades, window profiles, sun protection and attic elements, door systems and other building components made of aluminium alloys in construction.\u003c\/p\u003eMaterial Compatibility\u003cp\u003eEspecially for anodically oxidised surfaces and aluminium alloys; corrosion inhibitors prevent attack on anodised and aluminium, complexing agents prevent white tarnishing. pH value 7.5 to 8 within the reference values of the Aluminiumzentrale. For unknown coatings, check on a sample area in advance.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eALU-CON (Art. 665) is the associated preservative that forms a water and dirt-repellent protective film after cleaning with ALUNAL. For pH-neutral facade and machine cleaning without aluminium specificity, CONIL 2 phosphate-free (Art. 690) is available.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572416090496,"sku":"670-0001","price":17.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572416123264,"sku":"670-0012","price":178.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572416156032,"sku":"670-0010","price":123.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572416188800,"sku":"670-0030","price":342.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572416221568,"sku":"670-0060","price":629.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"conil-1-entfetter-industriereiniger","title":"CONIL 1","description":"\u003cp\u003eCONIL 1 is a biodegradable cleaning and degreasing concentrate with a very wide range of applications. For painting and building cleaning companies, it removes stubborn contaminants such as oil, wax, soot, and nicotine from almost all waterproof surfaces and is excellent for eliminating fire damage. Transport companies use it for cleaning tanks, barrels, tank wagons, operating facilities, and machines, while mechanical and plant engineering companies use it for cleaning and degreasing machines, plants, semi-finished and finished parts, as well as for metal degreasing before painting. The decisive operational advantage lies in the dilution range from 1:100 to pure: a single item covers everything from economical machine washing in high-pressure cleaners to concentrated facade cleaning. This reduces the number of stock items, simplifies instruction and hazardous substance directories, and allows for working cold or hot, using immersion or spray methods.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDilution range 1:100 to pure for all washing methods\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable and suitable for immersion and spray methods\u003c\/li\u003e\n\n\u003cli\u003eRemoves soot and nicotine during fire damage restoration\u003c\/li\u003e\n\n\u003cli\u003eMetal degreasing before painting without loss of adhesion\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eFor facade, plaster, and painted surfaces, apply CONIL 1 with a sponge, brush, or spray gun, allow to act for a short time, and rinse with water; dilution 1:10 to pure. Any remaining cleaner residues do not affect the adhesion and aging of commercially available paints. For machines and equipment, CONIL 1 can be used in all washing methods and in any mixing ratio, cold or hot, by immersion or spray method, as well as directly via chemical dosing in high-pressure cleaners; dilution 1:100 to 1:5. Liquid and vapor are highly flammable, so keep away from ignition sources and ensure good ventilation. Wear safety goggles and protective gloves, as the product can cause skin irritation and serious eye damage. Observe local wastewater regulations.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eFacade and plaster surfaces 1:10 to pure; machines and equipment 1:100 to 1:5\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approximately 3,000 liters of application solution for machine cleaning at 1:100. At 1:10 for facade and soot-covered surfaces, approximately 330 liters remain, which covers several hundred square meters depending on the application.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eFacades, plaster and painted surfaces, fire-damaged surfaces with soot contamination, nicotine-contaminated interior surfaces, tanks, barrels, tank wagons, operating facilities, machines, semi-finished and finished parts, and metal parts before painting.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for almost all waterproof surfaces and for metal parts before painting. Remaining cleaner residues do not affect the adhesion and aging of commercially available paints. For sensitive or painted surfaces, allow a short contact time and test in an inconspicuous area beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e11\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337+P313 If eye irritation persists: Get medical advice\/attention.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCONIL 3 (Art. 683) is the alkaline variant specifically for acid-sensitive natural and artificial stones on facades, CONIL 5 (Art. 685) is the extra strong stone cleaner. For pH-neutral cleaning with corrosion protection, CONIL 2 phosphate-free (Art. 690) is provided.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572416287104,"sku":"673-0001","price":17.5,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572416319872,"sku":"673-0012","price":176.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572416352640,"sku":"673-0010","price":122.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572416385408,"sku":"673-0030","price":339.0,"currency_code":"EUR","in_stock":true},{"title":"60 L container","offer_id":58572416418176,"sku":"673-0060","price":624.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"schweiss-trennmittel-emulsion-schweissperlen","title":"Anti-spatter spray","description":"\u003cp\u003eThe weld release agent prevents welding spatter from sticking to tools and workpieces. It is suitable for gas metal arc welding and shielded metal arc welding, is silicone-free and wax-free, and non-flammable. Unlike solvent-based release sprays, the product is an aqueous emulsion without solvents, which means there is no additional solvent load in the welding booth and no increased fire load at the workplace. The silicone-free nature is crucial for downstream processes: silicone residues lead to crater formation during painting. With proper application, treated workpieces are suitable for subsequent painting. For locksmiths and metal construction companies, this means less rework due to grinding and chiseling off adhering beads, less wear on welding nozzles and fixtures, and shorter cycle times per assembly. The application is undiluted and very thin with a hand atomizer or comparable spray device. A ready-to-use product is delivered, which can be provided directly at the welding workstation without a mixing station. Before post-treatment by painting or hot-dip galvanizing, the manufacturer recommends a test and, if necessary, cleaning of the workpiece.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAqueous emulsion without solvents, non-flammable\u003c\/li\u003e\n\n\u003cli\u003eSilicone-free and wax-free, paint-friendly with proper application\u003c\/li\u003e\n\n\u003cli\u003ePrevents welding beads from sticking to fixtures\u003c\/li\u003e\n\n\u003cli\u003eSuitable for gas metal arc welding and shielded metal arc welding\u003c\/li\u003e\n\n\u003cli\u003eUndiluted application with a hand atomizer, no mixing\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eFirst, clean workpieces of residues. Use the release agent undiluted and spray it on very thinly and evenly. Excessive application should be avoided to prevent pore formation in the weld metal and hydrogen-induced cracks in sensitive steels under critical stress. The agent must not get into the weld seam. Apply with a spray device, such as a hand atomizer. After spraying cold welding nozzles, remove any dripping. Shake vigorously before use. Before post-treatment of workpieces by painting or hot-dip galvanizing, a test and, if necessary, cleaning are recommended. Do not inhale spray mist and only process in well-ventilated areas; use existing extraction at the welding workstation.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady-to-use, do not dilute. Spray on very thinly and evenly, undiluted. Shake vigorously before use.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDue to the prescribed very thin application, about 15 to 25 milliliters per square meter of treated area should be applied. A 10-liter canister is thus theoretically sufficient for several hundred square meters of workpiece surface or for a large number of fixtures and welding nozzles in shift operation.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eWelding fixtures, clamping devices, clamping plates, welding nozzles and gas nozzles, workpieces and assemblies in gas metal arc welding and shielded metal arc welding, welding tables and supports in locksmiths, metal construction, and production lines.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eAqueous emulsion without solvents, silicone-free and wax-free, non-flammable. With proper application, treated workpieces are suitable for subsequent painting. Do not let it get into the weld seam. Before hot-dip galvanizing or painting, perform a test and, if necessary, cleaning. Apply particularly thinly to sensitive steels under critical stress.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eItem 993 is the aqueous, non-flammable variant in the Coverax range and complements the weld release agent (Item 315). For release and lubrication tasks outside of welding technology, Trennax-MS with silicone (Item 110) and the silicone-free Trennax OS (Item 111) are available.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572421497216,"sku":"993-0001","price":29.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572421529984,"sku":"993-0010","price":190.5,"currency_code":"EUR","in_stock":true},{"title":"30 L jerrycan","offer_id":58572421562752,"sku":"993-0030","price":501.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-grease-m-hochtemperaturfett-schmierfett","title":"Cover-Grease-M","description":"\u003cp\u003eCover-Grease-M is a ceramic-reinforced high-performance assembly grease for lubrication points where conventional greases fail thermally or mechanically. The lubricating film remains effective from approx. -180 °C to approx. +1,300 °C and withstands surface pressures up to around 10,000 bar. This reliably prevents seizing, fretting corrosion, and wear on hot screw connections. The formula is free of lead, nickel, cadmium, and PCBs, making it approved for companies with strict material and environmental requirements. Cover-Grease-M is resistant to water, fuels, and oils, as well as largely resistant to vapors, gases, and acids, remains abrasion-resistant, and does not age. For maintenance and assembly, this means: fewer disassembly damages, shorter downtimes, and predictable maintenance intervals.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTemperature resistant from approx. -180 °C to +1,300 °C\u003c\/li\u003e\n\n\u003cli\u003ePressure resistant up to approx. 10,000 bar\u003c\/li\u003e\n\n\u003cli\u003eFree of lead, nickel, cadmium, and PCBs\u003c\/li\u003e\n\n\u003cli\u003eResistant to water, fuels, oils, vapors, and most acids\u003c\/li\u003e\n\n\u003cli\u003ePrevents seizing and costly disassembly damage\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eDegrease metal surfaces and allow to dry. Shake can for approx. 30 seconds until the mixing ball is audible. Apply thinly in short bursts from a distance of 20–30 cm. After use, briefly spray the can upside down to keep the valve clear.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use, no dilution necessary. \u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eA 400 ml can is sufficient for approx. 4–6 m² of thinly coated surface or around 150–200 individual screw connections.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eExhaust screw connections and gaskets, spark plugs, brake cams and pins, brake cables, cardan shafts, studs, flanges, compressors, turbines, pumps, hydrants, sprockets, rollers, chain tensioners.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for steel, stainless steel, cast iron, non-ferrous metals, and aluminum. Protects metal-rubber connections from dissolution. Do not use on brake linings and friction surfaces.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e9P80-90G6-400Q-NA7F\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eHazard Warnings\u003cbr\u003e\n\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Word:\u003c\/strong\u003e Danger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220 Extremely flammable gas; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH Statements:\u003c\/strong\u003e EUH018 In use may form flammable\/explosive vapor\/air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international\u003cbr\u003eregulations.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eIdentical effect compared to Art. 152 (Cover-Grease-M Paste), but as a spray for hard-to-reach areas. Art. 125 White Spray Grease is the choice for normal temperature ranges; Art. 126 Chain and Cable Spray for heavily stressed chains.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578112086400,"sku":"101-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822535643520,"sku":"101-06","price":90.0,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578112119168,"sku":"101-12","price":166.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822535676288,"sku":"101-24","price":314.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-grease-m-hochleistungsschmiermittel.png?v=1785359481"},{"product_id":"trennax-ms-trennmittel-silikon-antistatisch","title":"Trennax-MS","description":"\u003cp\u003eTrennax-MS is a silicone-containing release and lubricant for the plastics, rubber, and textile processing industries. It combines high-quality release, lubricating, and conditioning properties with antistatic and anticorrosive effects. The ignition temperature is above 300 °C, which allows the product to be used safely in foundry and welding technology environments. Trennax-MS is physiologically harmless, skin-friendly, and non-toxic. The applied film enables drip-free and non-sticky lubrication of locks, wood and plastic mechanisms, and makes zippers and drawers permanently smooth. Important for work preparation: Due to the silicone content, subsequent painting or bonding of the treated surface is not possible – for this purpose, Trennax OS (Art. 111) is available.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRelease, lubrication, and conditioning effect in one product\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature over 300 °C – process-safe in welding technology\u003c\/li\u003e\n\n\u003cli\u003eAntistatic and anticorrosive\u003c\/li\u003e\n\n\u003cli\u003ePhysiologically harmless and skin-friendly\u003c\/li\u003e\n\n\u003cli\u003eDrip-free and non-sticky lubrication\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eSpray thinly onto cleaned surfaces from a distance of 30–50 cm. Hold the can upright. When used as a care product, polish afterwards to increase the shine.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Apply thinly – more application does not improve the release effect.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eOne 400 ml can is sufficient for approx. 15–20 m² of thinly treated mold surface.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003ePlastics, rubber, foam, and textile industry, foundry and welding technology, paper and printing industry, locksmiths, automotive workshops, furniture manufacturing, leather industry, tent factories, boat sector. Care of furniture, plastic surfaces, leather, tents, tarpaulins, blinds, awnings, locking systems.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal, plastic, leather, rubber, and wood. Attention: Contains silicone – treated surfaces can no longer be painted or bonded.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eJF90-U0PR-W005-KDG1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eH220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; \u003cmeta charset=\"utf-8\"\u003eH280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P273 Avoid release to the environment.; P302+P352 IF ON SKIN: Wash with plenty of soap and water.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 111 Trennax OS is the silicone-free alternative if the treated surface needs to be painted, bonded or metallized after the release process. Art. 316 Trennax-MS open is the canister variant for dipping and spraying systems.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578112348544,"sku":"110-01","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822493012352,"sku":"110-06","price":91.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 400ml can","offer_id":58578112381312,"sku":"110-12","price":163.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822493045120,"sku":"110-24","price":303.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-trennax-ms-trenn-gleitmittel-mit-silikon-01-produktbild.png?v=1785364246"},{"product_id":"cover-ptfe-spray-trockenschmierung-gleitmittel","title":"Cover PTFE Spray","description":"\u003cp\u003eCover PTFE Spray is a dry, grease-free release agent, lubricant, and dry film coating for all applications where oil- and grease-containing lubricants are undesirable. Because the PTFE film is non-tacky, it does not attract dust, chips, or dirt – a decisive advantage for guides, conveyor belts, and in dusty production environments where grease lubrication turns into grinding paste. The film is water, dust, and dirt repellent and resistant in a temperature range of -180 °C to +240 °C, as well as to many chemicals, water, and oils. Cover PTFE Spray is therefore the standard release agent in the optical and precision mechanics industries as well as in plastics processing when cleanliness is a process requirement.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDry PTFE film – does not bind dust or chips\u003c\/li\u003e\n\n\u003cli\u003eTemperature resistant from -180 °C to +240 °C\u003c\/li\u003e\n\n\u003cli\u003eResistant to many chemicals, water, and oils\u003c\/li\u003e\n\n\u003cli\u003eWater, dust, and dirt repellent\u003c\/li\u003e\n\n\u003cli\u003eRemovable without residue with Cover-BR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eShake can vigorously before use until the mixing ball moves freely. Spray thinly and evenly from a distance of approx. 20 cm. Allow to flash off until the dry film has formed. The active ingredient can be removed with a suitable solvent, e.g., Cover-BR (Art. 104).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. A thin dry film is sufficient.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 12–18 m² of sliding surface.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eGuides, slide rails, conveyor belts, chains, plastic bearings, cutting tools, drawers, furniture hinges, castors, door hinges. Release agent in plastics processing as well as the optical and precision mechanics industries. Water-resistant coating for paper, wood, and cork.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for metal, plastic, wood, paper, and cork. Dry film – does not attract dust.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurized container: May burst if heated.; H280; H315 Causes skin irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P403\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 515 Cover-PTFE is the canister version for dip and spray systems. Art. 111 Trennax OS is the silicone-free release agent for welding technology, Art. 126 Chain and Cable Spray is the adhesive lubricant for heavily loaded chains.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578113102208,"sku":"119-01","price":19.3,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822219956608,"sku":"119-06","price":114.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578113134976,"sku":"119-12","price":200.4,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822219989376,"sku":"119-24","price":390.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-mf40-multifunktionsspray-kriechoel","title":"Cover MF40","description":"\u003cp\u003eCover MF40 is a multifunctional spray that lubricates, maintains, cleans, and protects, thereby replacing several individual products on the workshop shelf. It loosens seized screws, hinges, and metal connections, removes grease, tar, oil, and adhesive residues, and at the same time provides long-lasting lubrication. The product displaces moisture, has an antistatic effect, and leaves a wafer-thin protective film that protects against corrosion and oxidation. Since the film remains almost invisible and stain-free, the spray can also be used on sensitive surfaces and precision devices where greasy sprays would leave disturbing residues. For maintenance and workshops, this means shorter setup times for dismantling work, less breakage of seized connections, and a reduced variety of articles in stock. The aerosol is marked with the signal word Danger and is classified, among other things, as an extremely flammable aerosol; the container is under pressure and may burst if heated.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFour functions in one can: loosen, lubricate, clean, protect\u003c\/li\u003e\n\n\u003cli\u003eDisplaces moisture and has an antistatic effect\u003c\/li\u003e\n\n\u003cli\u003eWafer-thin protective film, almost invisible and stain-free\u003c\/li\u003e\n\n\u003cli\u003eRemoves grease, tar, oil, and adhesive residues\u003c\/li\u003e\n\n\u003cli\u003eReduces the variety of articles in workshop inventory\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eShake the can before use and spray specifically from about 20 centimeters away onto the connection, bearing, or area to be cleaned. For seized screws and hinges, let it soak in for a few minutes so that the product can creep into the gap, then loosen and repeat the process if necessary. To remove grease, tar, oil, and adhesive residues, spray on, let it act briefly, and wipe off with a cloth. For moisture displacement and as corrosion protection, apply thinly and evenly; wiping is not necessary. Do not spray on live parts and disconnect systems before treatment. Use only in well-ventilated areas and away from ignition sources; do not smoke. Container is under pressure, protect from direct sunlight and temperatures above 50 degrees Celsius, and do not open forcefully or incinerate. Before use on plastics and paints, conduct a compatibility test.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eWith short, targeted sprays of about one second, around 200 individual applications are realistic per can. A container with 12 cans thus covers the ongoing needs of a medium-sized workshop or maintenance department for several months.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eSeized screws, nuts, bolts, and hinges, joints, linkages, and guides, electrical contacts and plug connections for moisture displacement, tools and bare metal parts as corrosion protection, removal of grease, tar, oil, and adhesive residues on machines, precision devices, and sensitive surfaces.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFor metals, fasteners, bearings, joints, and electrical contacts. Leaves an almost invisible, stain-free protective film and can therefore also be used on sensitive surfaces and precision devices. Before use on painted surfaces, plastics, and elastomers, conduct a compatibility test.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578114380160,"sku":"102002-01","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822208651648,"sku":"10202-06","price":53.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578114412928,"sku":"102002-12","price":85.2,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822208684416,"sku":"10202-24","price":162.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-89-wunderpaste-polierpaste-metall","title":"Miracle Paste Cover 89","description":"\u003cp\u003eThe Wonder Paste Cover 89 is a high-performance polishing and cleaning paste for metal, glass, and plastic – especially proven on brass, copper, silver, and gold. It cleans, cares for, polishes, and protects in one step, eliminating the usual need to switch between cleaner, polish, and preservative. Cover 89 removes stubborn deposits such as soot, oxidation layers, environmental deposits, burnt-in oils and greases, as well as flash rust, and eliminates etching on chrome parts. The ultra-thin protective film left behind repels water and significantly delays re-soiling – a noticeable effect on cleaning intervals in objects with many stainless steel and chrome surfaces. The product is skin-friendly, acid-free, and non-toxic.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCleans, cares for, polishes, and protects in one step\u003c\/li\u003e\n\n\u003cli\u003eAcid-free and skin-friendly\u003c\/li\u003e\n\n\u003cli\u003eUltra-thin protective film delays re-soiling\u003c\/li\u003e\n\n\u003cli\u003eRemoves flash rust, oxidation, and chrome etching\u003c\/li\u003e\n\n\u003cli\u003eNo rubbing necessary – works with a wet sponge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eImportant: always work with a wet sponge or cloth. Apply some Cover 89 to the wet sponge, wipe the surface, and rinse with clear water. If necessary, dry with a chamois. This creates a brilliant shine with an ultra-thin protective layer.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady to use. A small amount (hazelnut-sized) per application on a wet sponge.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eOne 600g can is sufficient for approximately 60–90 m² of polished surface or around 200 individual applications.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eGastronomy, commercial kitchens, hotels, industry, automotive sector. Bathtubs, tiles, hotplates and ceramic hobs, cutlery, glass, sinks, shower cabins, copper and brass cookware, car parts, bumpers. In tool manufacturing for cleaning molded parts and bending tools before high-gloss chrome plating.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor metal, glass, plastic, enamel, chrome, brass, copper, silver, and gold. Acid-free. Do not use on matte or brushed decorative surfaces that are not intended to be glossy.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e9\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e8AA0-W0KQ-Y003-6T9P\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS06 Skull and Crossbones, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H301 Toxic if swallowed.; H302 Harmful if swallowed.; H304 May be fatal if swallowed and enters airways.; H311 Toxic in contact with skin.; H314 Causes severe skin burns and eye damage.; H317 May cause an allergic skin reaction.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H331 Toxic if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH208 Contains sensitizer. May produce an allergic reaction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 265 Cover-Blitz is the liquid stainless steel and VA cleaner for large surfaces. Art. 290 Stainless steel care preserves without cleaning performance. Cover 89 is the choice when cleaning and polishing coincide.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus legal VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 250g can","offer_id":58809039585664,"sku":"120-250-01","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"12x 250g can","offer_id":58809039618432,"sku":"120-250-12","price":99.6,"currency_code":"EUR","in_stock":true},{"title":"1x 600g can","offer_id":58809039651200,"sku":"120-600-01","price":15.5,"currency_code":"EUR","in_stock":true},{"title":"12x 600g can","offer_id":58809039683968,"sku":"120-600-12","price":155.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-120-wunderpaste-cover-89-polier-pflegepaste-produktbild.webp?v=1788039116"},{"product_id":"beton-ex-betonloeser-zementschleierentferner","title":"BETON-EX","description":"\u003cp\u003eBETON-EX ist ein hochwirksamer Betonlöser und Zementschleier-Entferner auf Salzsäurebasis, der Betonablagerungen, Zement- und Kalkschleier zuverlässig löst. BETON-EX enthält keine Fluorwasserstoffsäure (Flussäure), die Glas, Glasuren und empfindliche mineralische Oberflächen dauerhaft anbätzen oder mattieren kann – ein Vorteil überall dort, wo neben Beton auch Fliesen, Glasbausteine oder Fensterflächen im Arbeitsbereich liegen. Das Produkt eignet sich besonders zum Entfernen von Ausblühungen und Fugenausläufern auf Klinkermauerwerk, wie sie nach Verfugungsarbeiten häufig zurückbleiben. Mit einem pH-Wert von 0,5 im Konzentrat wirkt BETON-EX kraftvoll und wird je nach Verschmutzungsgrad pur bis 1:10 mit Wasser eingesetzt, was das Produkt für sehr unterschiedliche Verschmutzungsgrade wirtschaftlich einsetzbar macht. Typische Einsatzgebiete sind Installationsbetriebe, Betonwerke einschließlich deren Fahrzeuge sowie stark verschmutzte Schwimmbäder. Da das Produkt Chlorwasserstoffsäure enthält und gegenüber Metallen korrosiv ist, sollte vor der Anwendung stets die Materialverträglichkeit geprüft und der Arbeitsschutz beachtet werden.\u003c\/p\u003e\n\u003ch3\u003eIhre Vorteile auf einen Blick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLöst Betonablagerungen, Zement- und Kalkschleier schnell und zuverlässig\u003c\/li\u003e\n\u003cli\u003eEnthält keine Fluorwasserstoffsäure – schont Glas und Glasuren\u003c\/li\u003e\n\u003cli\u003eEntfernt Ausblühungen und Fugenausläufer auf Klinkermauerwerk\u003c\/li\u003e\n\u003cli\u003eWirtschaftlich einsetzbar: verdünnbar von pur bis 1:10 mit Wasser\u003c\/li\u003e\n\u003cli\u003eVielseitig einsetzbar in Bau-, Installations- und Schwimmbadbetrieben\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduktanwendung\u003c\/h3\u003e\n\u003cp\u003eVor der Anwendung die Materialverträglichkeit an unauffälliger Stelle prüfen. BETON-EX je nach Verschmutzungsgrad pur bis 1:10 mit Wasser einsetzen; beim Verdünnen zuerst das Produkt in den Behälter geben und erst danach mit Wasser auffüllen. Auf die Ablagerungen auftragen, kurz einwirken lassen und mit Schrubber oder hartem Wasserstrahl (Hochdruckreiniger) lösen. Anschließend gründlich mit klarem Wasser nachspülen. Angrenzende Metallteile, Glas und säureempfindliche Bauteile vor Arbeitsbeginn abdecken. Schutzhandschuhe, Schutzbrille beziehungsweise Gesichtsschutz und geeignete Schutzkleidung tragen und für ausreichende Belüftung sorgen. Örtliche Abwasserbestimmungen beachten.\u003c\/p\u003e\n\u003ch3\u003eDosierung\u003c\/h3\u003e\n\u003cp\u003ePur bis 1:10 mit Wasser, je nach Verschmutzungsgrad. Beim Verdünnen zuerst das Produkt in den Behälter geben, dann mit Wasser auffüllen.\u003c\/p\u003e\n\u003ch3\u003eVerbrauch und Ergiebigkeit\u003c\/h3\u003e\n\u003cp\u003eBei einer Anwendungslösung von 1:10 ergibt ein 10-Liter-Kanister rund 110 Liter Gebrauchslösung. Der tatsächliche Verbrauch hängt stark vom Verschmutzungsgrad ab; bei starken Betonablagerungen und Zementschleiern ist eine niedrigere Verdünnung bis hin zur puren Anwendung und damit ein entsprechend höherer Verbrauch einzuplanen.\u003c\/p\u003e\n\u003ch3\u003eEinsatzbereiche\u003c\/h3\u003e\n\u003cp\u003eInstallationsbetriebe, Betonwerke und deren Fahrzeuge, stark verschmutzte Schwimmbäder. Klinkermauerwerk mit Ausblühungen und Fugenausläufern.\u003c\/p\u003e\n\u003ch3\u003eMaterialverträglichkeit\u003c\/h3\u003e\n\u003cp\u003eSauer (pH 0,5 im Konzentrat) und gegenüber Metallen korrosiv (H290). Für säurebeständige mineralische Untergründe wie Beton und Klinker geeignet; enthält keine Fluorwasserstoffsäure und ist dadurch schonender zu Glas und Glasuren als flussäurehaltige Produkte. Vor der Anwendung die Materialverträglichkeit an unauffälliger Stelle prüfen, angrenzende Metallteile abdecken und nicht mit chlor- oder alkalihaltigen Produkten mischen.\u003c\/p\u003e\n\u003ch3\u003eTechnische Daten\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduktart\u003c\/td\u003e\n\u003ctd\u003eKonzentrat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH-Wert (Konzentrat)\u003c\/td\u003e\n\u003ctd\u003e0,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDichte (bei 20 °C)\u003c\/td\u003e\n\u003ctd\u003e1,1 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignalwort\u003c\/td\u003e\n\u003ctd\u003eGefahr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eGefahrenhinweise\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS-Piktogramme:\u003c\/strong\u003e GHS05 Ätzwirkung, GHS07 Ausrufezeichen\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Sätze:\u003c\/strong\u003e H290 Kann gegenüber Metallen korrosiv sein.; H315 Verursacht Hautreizungen.; H319 Verursacht schwere Augenreizung.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Sätze:\u003c\/strong\u003e P280 Schutzhandschuhe\/Schutzkleidung\/Augenschutz\/Gesichtsschutz tragen.; P305+P351+P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.; P301+P330+P331 BEI VERSCHLUCKEN: Mund ausspülen. KEIN Erbrechen herbeiführen.; P310 Sofort GIFTINFORMATIONSZENTRUM oder Arzt anrufen.\u003c\/p\u003e\n\u003ch3\u003eProduktvergleich\u003c\/h3\u003e\n\u003cp\u003eCOVEXAN (Art. 658) ist die mildsaure Alternative für empfindlichere, säurebeständige Natursteinfassaden und arbeitet materialschonender als BETON-EX. Für Rostflecken auf Stein und Beton ist Rost-Ex (Art. 699) die geeignete Wahl, für Kalk- und Urinsteinablagerungen im Sanitärbereich Karonax Ultra (Art. 273).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVerkauf ausschließlich an gewerbliche Kunden. Alle Preise netto zzgl. gesetzlicher MwSt.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L Flasche","offer_id":58830595031424,"sku":"214A-0001","price":19.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L Flasche","offer_id":58830595064192,"sku":"214A-0012","price":209.9,"currency_code":"EUR","in_stock":true},{"title":"10 L Kanister","offer_id":58830595096960,"sku":"214A-0010","price":149.9,"currency_code":"EUR","in_stock":true},{"title":"30 L Kanister","offer_id":58830595129728,"sku":"214A-0030","price":419.9,"currency_code":"EUR","in_stock":true},{"title":"60 L Kanister","offer_id":58830595162496,"sku":"214A-0060","price":769.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-214a-beton-ex-betonloeser-zementschleierentferner-produktbild.webp?v=1788271257"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/collections\/iStock-2240058592.jpg?v=1785177165","url":"https:\/\/coverax.de\/en\/collections\/handwerk.oembed","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}