{"title":"Car Care \u0026 Workshop","description":"","products":[{"product_id":"cover-mos-rostloeser-spray","title":"Cover-MOS","description":"\u003cp\u003eCover-MOS is a high-performance rust remover with MoS2 additive for seized screw and plug connections. With a very low density of 0.716, the product achieves exceptional creeping ability: it penetrates into the finest gaps, undercuts moisture, and climbs upwards in threads even against gravity. Connections that could previously only be loosened by heating or destruction become workable again. After loosening, a thin protective film remains, which protects metal parts from renewed corrosion and permanently eliminates squeaking noises on moving parts. For workshops and maintenance, Cover-MOS is thus a time-saver that noticeably reduces follow-up costs due to damaged components.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtreme creeping ability due to density 0.716 – also works overhead\u003c\/li\u003e\n\n\u003cli\u003eLoosens the toughest rust connections without heating\u003c\/li\u003e\n\n\u003cli\u003eLeaves a corrosion-protective lubricating film\u003c\/li\u003e\n\n\u003cli\u003ePermanently eliminates squeaking noises\u003c\/li\u003e\n\n\u003cli\u003eReduces disassembly damage and downtime\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eApply in short bursts directly to the seized connection. Depending on the degree of corrosion, allow to act for 5–15 minutes; for heavy rust, repeat the process. Then loosen the connection.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray selectively, do not atomize over large areas.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eA 400-ml can loosens approx. 100–150 screw connections, depending on the degree of corrosion.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eTie rods, stud bolts, mufflers, cylinder head bolts, screw and plug connections, seized mechanical parts on vehicles, construction machinery, winter service equipment, production machines, tools, and scaffolding.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for all metals. Avoid contact with brake pads, V-belts, and painted visible surfaces.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eAS80-T05K-F006-9NTH\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSignal word:\u003c\/strong\u003e Danger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-statements:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapour.; H226 Flammable liquid and vapour.; H229 Pressurised container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH-statements:\u003c\/strong\u003e EUH018 In use may form flammable\/explosive vapour-air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurised container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C\/122 °F.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international regulations.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 338 ENTRO-GEL is the pasty variant for vertical surfaces with a long exposure time; Art. 679 ENTRO is the liquid immersion variant. Cover-MF40 (Art. 10202) is the broader multi-functional spray with lower loosening performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572385583488,"sku":"102-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822818300288,"sku":"102,06","price":93.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572385616256,"sku":"102-12","price":164.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822818333056,"sku":"102-24","price":300.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-mos-rostloeser-montagespray-produktbild.png?v=1785329178"},{"product_id":"cover-zink-ab-zinkspray-korrosionsschutz","title":"Cover-Zink AB","description":"\u003cp\u003eCover-Zink AB is a zinc repair spray with 99% zinc purity for restoring cathodic corrosion protection to hot-dip galvanized structures. The bright, zinc-like shade is practically indistinguishable from fresh hot-dip galvanization – welds and defects remain inconspicuous after repair. The self-forming zinc oxide seals the surface and provides lasting protection against rust, corrosion, and weathering. The coating dries quickly, is resistant to many chemicals, and remains electrically conductive, making it suitable for use as a spot welding paint and as a conductive intermediate layer. For metal construction, steel construction, and maintenance, the product is the economical way to restore corrosion protection after welding and processing work in accordance with standards.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e99% zinc purity for full cathodic protection\u003c\/li\u003e\n\n\u003cli\u003eVisually indistinguishable from fresh hot-dip galvanization\u003c\/li\u003e\n\n\u003cli\u003eElectrically conductive – usable as spot welding paint\u003c\/li\u003e\n\n\u003cli\u003eQuick-drying, thus time-saving in the process\u003c\/li\u003e\n\n\u003cli\u003eResistant to many chemicals and weathering\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eThoroughly derust and degrease the substrate. Bring the can to room temperature and shake vigorously for approx. 2 minutes until the mixing ball moves freely. Apply in thin layers from a distance of 25–30 cm, allowing 5 minutes of flash-off time between each layer. Use only in well-ventilated areas.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Apply 2–3 thin layers instead of one thick layer.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003eOne 400ml can covers approx. 1.5–2 m² of protected area with two coats.\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eWelds and defects on hot-dip galvanized structures, railings, scaffolding, steel construction, car body construction, heat-conducting parts, spot welding preparation.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eFor steel and galvanized surfaces. Not for aluminum without pre-treatment. Cover adjacent areas.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI number\u003c\/td\u003e\n\n\u003ctd\u003eMU80-90UY-R00Q-Y0DK\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation mark; GHS09 Environmental hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-statements:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.; May cause genetic defects (state route of exposure if it is conclusively proven that the hazard does not exist via any other route of exposure); May cause cancer (state route of exposure if it is conclusively proven that the hazard does not exist via any other route of exposure)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH statements:\u003c\/strong\u003e EUH018 In use, may form flammable\/explosive vapour\/air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international\u003cbr\u003eregulations.\u003c\/p\u003e\n\u003ch3\u003eProduct comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 114 ANTIROST offers transparent preservation protection without zinc content and is intended for storage and shipping. Cover-Zink AB is the choice when the zinc protection itself needs to be restored.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572385681792,"sku":"103-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823125008768,"sku":"103-06","price":93.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572385714560,"sku":"103-12","price":154.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823125041536,"sku":"103-24","price":300.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-zink-ab-zink-ausbesserungsspray-01-produktbild.png?v=1785329179"},{"product_id":"cover-br-bremsenreiniger-97-prozent","title":"Cover-BR","description":"\u003cp\u003eCover-BR is a quick cleaner with 97% active ingredients for brake and clutch maintenance. The product deep-degreases and removes tar, wax, brake fluid, oil, and resinified residues in one step – without re-wiping and without residues that affect friction values. Treated brake and clutch parts regain their grip, and braking performance remains reproducible. The active ingredients are free of chlorine, PCBs, lead, and cadmium, simplifying disposal and occupational safety. Due to the high evaporation speed, the component is ready for assembly immediately after application. In workshops with high throughput, Cover-BR significantly reduces the turnaround time per vehicle.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e97% active ingredient content – high cleaning performance per can\u003c\/li\u003e\n\n\u003cli\u003eResidue-free evaporation, immediately ready for assembly\u003c\/li\u003e\n\n\u003cli\u003eFree of chlorine, PCBs, lead, and cadmium\u003c\/li\u003e\n\n\u003cli\u003eRestores grip to brake and clutch parts\u003c\/li\u003e\n\n\u003cli\u003eAlso dissolves resinified old residues\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eSpray generously onto soiled parts and allow the active ingredient with the dissolved dirt to run off. Air dry or wipe with a dry cloth. Repeat the process for heavy soiling. Use a drip tray.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Do not dilute.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eOne 500 ml can is sufficient for approx. 2–4 axles or 6–10 brake sets.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eCylinders, clutch linings and parts, drum and disc brakes, brake pads and shoes, petrol and oil pumps, gearboxes, carburetors, springs, bushings. Also degreases metal, glass, and ceramics.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eNot suitable for Plexiglas, thermoplastics such as PVC and simple paint coatings – these will dissolve. Unproblematic on metal, glass, ceramics and many technical plastics.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark; GHS09 Environmental Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapour.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH Statements:\u003c\/strong\u003e EUH018 In use, may form flammable\/explosive vapour\/air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P403 Store in a well-ventilated place\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 304 Cover BR Liquid is the canister-based bulk consumer variant for washbasins and spray bottles – significantly cheaper per liter with the same effect. The aerosol variant is ideal for mobile use and spot application.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572385780096,"sku":"104-01","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823119896960,"sku":"104-06","price":54.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572385812864,"sku":"104-12","price":99.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823119929728,"sku":"104-24","price":186.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"trennax-os-trennmittel-silikonfrei-lackierbar","title":"Trennax OS","description":"\u003cp\u003eTrennax OS is a silicone-free release and lubricant for all processes in which the treated surface subsequently needs to be painted, bonded, or metallized. This post-processability is precisely what distinguishes it from silicone-containing release agents and makes it the standard solution in paint shops, packaging, and clothing industries. The ignition temperature is above 300 °C, which allows its use in welding technology: Trennax OS reliably prevents welding spatter from adhering to the workpiece, torch nozzle, and fixture. In plastics processing, it serves as a mold release agent for thermoplastics and thermosets, with occasional spraying enabling multiple release operations – significantly reducing consumption per shot.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicone-free – subsequent painting, bonding, and metallizing possible\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature above 300 °C\u003c\/li\u003e\n\n\u003cli\u003ePrevents welding spatter from adhering\u003c\/li\u003e\n\n\u003cli\u003eMultiple release operations per spray application\u003c\/li\u003e\n\n\u003cli\u003eLubricates without sticking – no machine contamination\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eSpray from a distance of 30–50 cm. Can be sprayed in all positions, but do not spray horizontally to avoid gas loss. Remove residues from plastic molds beforehand.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. A thin spray film is sufficient; occasional re-spraying is enough for several release operations.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003eA 400 ml can covers approx. 15–20 m² of mold surface or several hundred release operations.\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eWelding technology (welding spatter protection), mold release agent in the plastics processing industry, locksmiths, automotive workshops, clothing and packaging industry, metal processing. Lubricates material guide surfaces on stamping and milling machines, saw blades and planing machines; prevents sticking of knitting and sewing machines, molding templates, and conveyor belts.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal, plastic (thermoplastics and thermosets), wood, and textile machines. Silicone-free – painting, bonding, and metallizing remain possible.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P273 Avoid release to the environment.; P302+P352 IF ON SKIN: Wash with plenty of water and soap.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\n\u003ch3\u003eProduct comparison\u003c\/h3\u003e\n\u003cp\u003eItem no. 110 Trennax-MS is the silicone-containing variant with additional care properties but without post-processability. Item no. 317 Trennax OS open is the canister variant for systems with automatic spraying.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386009472,"sku":"111-01","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823101776256,"sku":"111-06","price":91.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572386042240,"sku":"111-12","price":163.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823101809024,"sku":"111-24","price":303.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-trennax-os-trenn-gleitmittel-ohne-silikon-01-produktbild.png?v=1785329185"},{"product_id":"e-protect-feuchtigkeitsschutz-elektrik","title":"E-Protect","description":"\u003cp\u003eE-Protect is a water-displacing moisture protection for electrical devices and systems. The product penetrates and displaces water, forming a permanent protective film on all electrical parts without impairing conductivity. Ignition malfunctions and leakage currents are eliminated, and failures and downtimes in machines and systems are significantly reduced. E-Protect creeps into cavities and windings, but does not attack insulating varnishes and is neutral towards plastics, rubber, glass, ceramics, and metals. A practical side effect for vehicle fleets: Treated car engines become unattractive to martens, which demonstrably reduces marten damage. The product is resistant to vapors, salts, and water.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDisplaces water without affecting conductivity\u003c\/li\u003e\n\n\u003cli\u003eEliminates leakage currents and ignition malfunctions\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack insulating varnishes\u003c\/li\u003e\n\n\u003cli\u003eReduces marten damage to car engines\u003c\/li\u003e\n\n\u003cli\u003eReduces unplanned downtimes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSwitch off the power to the system if possible. Spray affected contacts, windings, and plug connections directly. Allow to air briefly, then put back into operation. Repeat at regular maintenance intervals for prevention.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Short, targeted sprays on contacts and windings.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 80–120 switch cabinet or plug connection treatments.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eElectric motors and windings, ignition systems, fuses and fuse boxes, switches and switchgear, terminals, junction boxes, signal and traffic light systems, plugs and sockets, cable reels, power distributors, vehicle electrics and lighting, boat engines and electrics, ventilation and air conditioning systems, garden lighting.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eNeutral towards plastics, rubber, glass, ceramics, and metals. Does not attack insulating varnishes. Resistant to vapors, salts, and water.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eUQ90-C0RX-T00N-KE77\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas Cylinder, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurised container: May burst if heated.; H280; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 318 COVER 21 and Art. 319 COVER 32 are liquid electrical cleaners in canisters for pre-cleaning. E-Protect is the subsequent protective film. Art. 136 Marten Repellent acts specifically as a deterrent.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572386664832,"sku":"113-01","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823090372992,"sku":"113-06","price":90.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572386697600,"sku":"113-12","price":165.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823090405760,"sku":"113-24","price":310.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-e-protect-kontaktspray-feuchtigkeitsschutz-01-produktbild.png?v=1785329188"},{"product_id":"kaeltespray-montage-demontage-fehlersuche","title":"Cold spray","description":"\u003cp\u003eCooling spray lowers the temperature of materials and components within seconds, making it a process tool for assembly, disassembly, and troubleshooting. In mechanical engineering, it accelerates the shrink-fitting of bearings and the joining of fits; the rapid shrinkage also allows for early error detection when reaching the fit dimension, which helps to avoid high defect rates from the outset. In the electrical and electronics industry, cooling spray is the standard aid for localizing temperature-dependent faults on components, circuit boards, and PCBs. The time saved compared to using a cooling chamber or dry ice is considerable and makes the product an economical tool for single-piece production and service.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCooling in seconds instead of minutes\u003c\/li\u003e\n\n\u003cli\u003eAccelerates shrink-fitting and joining of fits\u003c\/li\u003e\n\n\u003cli\u003eEarlier error detection reduces the reject rate\u003c\/li\u003e\n\n\u003cli\u003eStandard tool for electronics troubleshooting\u003c\/li\u003e\n\n\u003cli\u003eMobile use – no cooling chamber necessary\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray parts for approx. 10 seconds until the desired cooling is achieved. Caution: do not spray on surfaces or objects hotter than 50 °C. Cooling spray is highly flammable and combustible – keep away from ignition sources. Wear protective gloves (risk of frostbite).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Approx. 10 seconds spray duration per cooling process.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 40–60 cooling processes of 10 seconds each.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eElectrical and electronics industry for troubleshooting components, circuit boards, and PCBs. Mechanical engineering for shrink-fitting bearings and joining fits. Assembly and disassembly of temperature-critical connections.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for metal and electronic components. Do not use on surfaces above 50 °C. Avoid skin contact – risk of frostbite.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurised container: May burst if heated.; H280; H315 Causes skin irritation.; H317 May cause an allergic skin reaction.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 106 Chewing gum remover uses the same freezing effect but is designed for cleaning applications. Cooling spray is the technical variant for assembly and electronics.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386730368,"sku":"123-01","price":14.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823085523328,"sku":"123-06","price":82.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572386763136,"sku":"123-12","price":144.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823085556096,"sku":"123-24","price":265.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"weisses-spruehfett-schmierfett-batteriepole","title":"White spray grease","description":"\u003cp\u003eCoverax White Spray Grease is based on lithium hydroxystearate soap in mineral oil and is equipped with wear-reducing and corrosion-protective additives. The result is high temperature stability with maximum service life and minimal friction losses – operational reliability is maintained even in the presence of water. The operating range is from -20 °C to +150 °C, with a worked penetration according to DIN ISO 2137 of 220–250. A second application, often crucial in practice, is terminal protection on lead-acid batteries: the grease shields terminals and terminal clamps from moisture, salt spray, acid vapors, and oxygen, thereby preventing efflorescence and contact resistance, which can lead to interruptions, fire hazards, and acid leakage. The product is not electrically conductive.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLithium hydroxystearate base with EP additives\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature -20 °C to +150 °C\u003c\/li\u003e\n\n\u003cli\u003eWater-resistant – operational reliability even in wet conditions\u003c\/li\u003e\n\n\u003cli\u003eElectrically non-conductive, ideal as pole grease\u003c\/li\u003e\n\n\u003cli\u003ePrevents efflorescence and contact resistance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eShake vigorously for approx. 2–3 minutes before use. Spray a thin layer on the surfaces to be treated. Clean battery terminals of oxide before application. For rolling bearings, observe the bearing manufacturer's specifications.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady to use. Spray thinly, avoid over-greasing.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 150–250 lubrication points or about 200 battery terminal treatments.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eRolling and plain bearings in industry, automotive, construction and agricultural machinery, and marine applications. Hinges in automotive applications. Terminal protection on lead-acid batteries, plug contacts, and lamp sockets on motorcycles, quads, bicycles, trailers, trucks, and yachts.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for steel, non-ferrous metals, and elastomers. Electrically non-conductive. Operating temperature -20 °C to +150 °C.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurized container: May burst if heated.; H280; H315 Causes skin irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P403\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 101 Cover-Grease-M is the high-temperature grease up to +1,300 °C. Art. 112 Visco-Spray is food-safe. Art. 126 Chain and Cable Spray is the creeping adhesive lubricant for chains.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386795904,"sku":"125-01","price":13.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823068942720,"sku":"125-06","price":81.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572386828672,"sku":"125-12","price":134.4,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823068975488,"sku":"125-24","price":278.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"ketten-seilzug-spray-haftschmierung-kriechfaehig","title":"Chain and Cable Spray","description":"\u003cp\u003eChain and Wire Rope Spray is a synthetic, transparent adhesive lubricant for heavily loaded chains and wire ropes. With a density of only 0.66, it achieves excellent creeping ability – even overhead – lubricating roller chains both inside and out simultaneously. This is the crucial property for chains without a relubrication device, such as multi-row forklift chains or single and multi-leaf chains: The active ingredient reaches bolts and bushings, where the actual wear occurs. Due to its high pressure resistance, the product is stable from -40 °C to +200 °C, and temporarily up to +250 °C. It adheres even to fast-moving chains without flinging off, is water-repellent, preserves, and ensures quiet, dampened operation.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDensity 0.66 – creeps into bolts and bushings, even overhead\u003c\/li\u003e\n\n\u003cli\u003eInternal and external lubrication in one step\u003c\/li\u003e\n\n\u003cli\u003eTemperature resistant from -40 °C to +200 °C, temporarily +250 °C\u003c\/li\u003e\n\n\u003cli\u003eNo flinging off, even with fast-moving chains\u003c\/li\u003e\n\n\u003cli\u003eAlso acts as corrosion protection and preservative\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eRemove dirt and old grease residues beforehand with Multi-Clean, and loosen rust with Cover-MOS. Shake the can vigorously for 2–3 minutes. Spray sliding surfaces sufficiently from a distance of approx. 20 cm and allow to penetrate, respraying if necessary. Chains and wire ropes can be put into operation after approx. 10 minutes.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady for use. Economical in consumption – let the chain complete one full rotation.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 30–50 chain lubrications or about 60 m of chain length.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eChains and wire ropes of all kinds, bearings, joints and couplings, O-rings, gear and worm drives, roller and ball bearings, forklift chains, motorcycle and bicycle chains.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor steel and non-ferrous metals. Transparent – no visual impairment. Do not use on friction surfaces and brakes.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS-Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurised container: May burst if heated.; H280; H315 Causes skin irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P403\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 125 White Spray Grease is the general all-purpose grease without creeping effect. Art. 119 Cover PTFE-Spray is the dry alternative for dusty environments without high loads.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572386861440,"sku":"126-01","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58823061242240,"sku":"126-06","price":90.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572386894208,"sku":"126-12","price":162.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58823061275008,"sku":"126-24","price":303.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"kunststoffpflege-os-hochglanz-silikonfrei","title":"Plastic Care OS High Gloss","description":"\u003cp\u003ePlastic Care OS High Gloss is a silicone-free care product for plastic, rubber, and tire surfaces with a pronounced high-gloss effect. It is antistatic and anticorrosive, combining high-quality care, lubricating, and release properties. The silicone-free nature is the decisive difference from many competitor products: treated parts can still be painted or glued, and no silicone contamination occurs in painting areas – a must for detailers who also perform paintwork in the same operation. The product is CFC-free, physiologically harmless, skin-friendly, and non-toxic. On tires, it creates an intense high gloss; on dashboards and trim, it provides a well-maintained, dust-repellent surface.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSilicone-free – no contamination of painting areas\u003c\/li\u003e\n\n\u003cli\u003eExtreme high gloss on plastic and tires\u003c\/li\u003e\n\n\u003cli\u003eAntistatic – reduces dust adhesion\u003c\/li\u003e\n\n\u003cli\u003eCFC-free, skin-friendly, and non-toxic\u003c\/li\u003e\n\n\u003cli\u003eAlso available in 10-liter containers for high consumption\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray thinly onto cleaned surfaces from a distance of 30–50 cm. Hold the can upright and wipe with a soft cloth. Do not spray on tire treads.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady to use. Spray thinly and wipe.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 8–12 vehicle interior treatments or 10–15 wheel sets.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eDashboards, plastic parts, door panels, plastic bumpers, plastic handles. Care for rubber, tires, and seals.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor plastic, rubber, and elastomers. Silicone-free – painting and gluing remain possible. Do not use on steering wheel, pedals, and tire treads (risk of slipping).\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas Cylinder, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurized container: May burst if heated.; H280; H315 Causes skin irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P403\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 110 Trennax-MS is the silicone-containing variant with a stronger release effect but without painting approval. Art. 142 Cover Tire Shine is a pure tire care product in a canister.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572386992512,"sku":"134-01","price":14.9,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822935249280,"sku":"134-06","price":92.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572387025280,"sku":"134-12","price":171.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822935282048,"sku":"134-24","price":326.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"marder-schreck-marderschutz-duftstoff-fahrzeug","title":"Marten Deterrent","description":"\u003cp\u003eMarder Schreck protects vehicles with special scents from martens biting through cables, hoses, and insulation material. The product does not kill or injure the animals but uses their sensitive sense of smell: The engine compartment becomes unattractive to the marten, and it avoids the vehicle. For fleet operators, this is the most economical prevention against a type of damage that can quickly reach four figures per incident and leads to unplanned vehicle downtime. Marder Schreck is harmless to all materials used in the engine compartment, such as plastic, rubber, aluminum, brass, and metal. One treatment lasts approximately three to four months.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAnimal welfare compliant – deters without harming\u003c\/li\u003e\n\n\u003cli\u003eEffect lasts approx. 3–4 months\u003c\/li\u003e\n\n\u003cli\u003eMaterial-compatible with all engine compartment materials\u003c\/li\u003e\n\n\u003cli\u003ePrevents expensive cable and insulation damage\u003c\/li\u003e\n\n\u003cli\u003eQuick to apply without disassembly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eEngine should be clean and free of oil. Spray the entire engine compartment with the aerosol can. For rubber antennas, spray the product onto a paper towel and wipe the antenna with it. Effect lasts approx. 3–4 months; reapply after every engine wash.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Spray the entire engine compartment evenly.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 4–6 engine compartment treatments.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eAll vehicle engines and rubber antennas. Haulage companies, taxi companies, company fleets, municipal vehicle fleets, permanent outdoor parkers.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eHarmless to plastic, rubber, aluminum, brass, and metal in the engine compartment. Do not spray on hot engine parts.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard warnings\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark, GHS08 Health hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH phrases:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 113 E-Protect also offers some marten repellent as a side effect, but is primarily moisture protection. Marder Schreck is the specialized repellent with a significantly longer lasting effect.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572387058048,"sku":"136-01","price":15.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822915719552,"sku":"136-06","price":92.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572387090816,"sku":"136-12","price":160.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822915752320,"sku":"136-24","price":310.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-reifen-glanz-reifenpflege-hochglanz","title":"Cover Tire Shine","description":"\u003cp\u003eCover Reifen-Glanz restores the deep black and high gloss to yellowed and dull tires. For detailers, car dealerships, and rental companies, this is the visual factor that distinguishes a well-maintained vehicle from a used one – and with minimal time expenditure per wheel. The product does not attack rubber, aluminum, or plastic and can therefore be used even if the rim or wheel arch is accidentally covered during application. The care effect goes beyond aesthetics: The film protects the tire sidewall from UV-induced embrittlement and delays the typical gray discoloration.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eRestores deep black and high gloss to yellowed tires\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack rubber, aluminum, or plastic\u003c\/li\u003e\n\n\u003cli\u003eProtects the sidewall from UV-induced embrittlement\u003c\/li\u003e\n\n\u003cli\u003eVery low material consumption per wheel set\u003c\/li\u003e\n\n\u003cli\u003eImmediately visible detailing result\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eThoroughly clean tires beforehand and allow to dry. Apply product evenly to the tire sidewall and allow to air dry briefly. Do not apply to the tread. If necessary, distribute with an applicator sponge.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Approx. 20–30 ml per wheel set.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 10-liter canister is sufficient for approx. 350–500 wheel sets.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eTire sidewalls on cars, vans, trucks, trailers, and RVs. Rubber parts and plastic attachments on the exterior.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eDoes not attack rubber, aluminum, or plastic. Do not apply to the tread – risk of slipping.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS-Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas Cylinder, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 134 Kunststoffpflege OS Hochglanz additionally covers interior plastics and is silicone-free. Cover Reifen-Glanz specializes in tires and exterior rubber.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572387189120,"sku":"141-01","price":14.4,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822903431552,"sku":"141-06","price":88.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572387221888,"sku":"141-12","price":148.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822903464320,"sku":"141-24","price":284.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-crs-spray-rostumwandler-korrosionsschutz","title":"Cover CRS-Spray","description":"\u003cp\u003eCover CRS-Spray combines rust stabilizer, rust converter, and rust protection in one product. It chemically converts existing rust, improves paint adhesion, and, when applied correctly, provides immediate 100% protection against further corrosion. Crucially for practical use: the combination of active ingredients does not necessarily require a subsequent coat of paint – treated parts can be exposed to the elements without needing re-application. This saves an entire work step in daily maintenance. For touch-up work, the product can be applied over firmly adhering paint layers, eliminating the need for extensive stripping. Applicable to rusted and bare iron and metal parts.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRust conversion and rust protection in one step\u003c\/li\u003e\n\n\u003cli\u003eSubsequent coating not absolutely necessary\u003c\/li\u003e\n\n\u003cli\u003eApplicable over firmly adhering paint layers\u003c\/li\u003e\n\n\u003cli\u003eSignificantly improves the adhesion of subsequent coatings\u003c\/li\u003e\n\n\u003cli\u003eWeather-resistant without post-treatment\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eDo not apply in direct sunlight. Remove coarse rust with a wire brush, then spray Cover CRS-Spray thinly. Drying time before further processing at least 2 hours.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray thinly and evenly, not in direct sunlight.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\n\u003cp\u003eOne 400ml can treats approx. 3–5 m² of rusted surface.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eIndustry, steel constructions, metalworking companies, sewage and water treatment plants, construction industry, commercial vehicles, mast construction, agriculture, car workshops. Preservation of machinery, clearing equipment, clearing vehicles, refuse vehicles, and transport trucks.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFor iron and steel, rusted or bare. Can be applied over firmly adhering paint layers. Not for non-ferrous metals and aluminum.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572387254656,"sku":"144-01","price":15.8,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822884491648,"sku":"144-06","price":102.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572387287424,"sku":"144-12","price":178.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822884524416,"sku":"144-24","price":339.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"wartungsspray-150-ml-multifunktionsspray","title":"Maintenance spray","description":"\u003cp\u003eThe 100 ml maintenance spray is a multifunctional, high-performance lubricant with long-term effect for the entire assembly and service area. It combines three functions: it cleans metal and plastic surfaces, lubricates locks, hinges and mechanisms, and provides lasting protection against corrosion thanks to its special formula. The compact 100 ml size is specifically designed for mobile service cases and individual use – it fits into any tool bag and does not dry out from prolonged storage on the shelf. The product is suitable for a wide range of materials and material combinations: metal, iron, non-ferrous metals, wood, and plastic surfaces (check compatibility). Spraying makes moving parts run smoothly again, while reducing wear and providing corrosion protection.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLubricates, cleans, and protects in one product\u003c\/li\u003e\n\n\u003cli\u003eLong-lasting effect – less frequent reapplication\u003c\/li\u003e\n\n\u003cli\u003eCompact 100 ml size for service cases and tool bags\u003c\/li\u003e\n\n\u003cli\u003eFor metal, wood, non-ferrous metals, and many plastics\u003c\/li\u003e\n\n\u003cli\u003eMakes fittings and mechanisms permanently smooth-running\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eSpray the parts to be maintained, cleaned, or lubricated from a distance of 5–20 cm in short bursts. Repeat application as needed. For plastics, check compatibility beforehand.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Short, targeted spray bursts.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003eA 100 ml can is sufficient for approx. 60–100 individual applications.\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eFittings and mechanisms on windows, doors, gates, and garages, door and window seals. Antennas, chains, locks, fasteners, joints, shredders. Vehicle, aviation, and forwarding sectors, building services, office, precision mechanics, model making, bicycle, bus.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eFor metal, iron, non-ferrous metals, wood, and many plastics. For plastics, check compatibility beforehand.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 150ml can","offer_id":58572388401536,"sku":"178-01","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"12x 150ml can","offer_id":58572388434304,"sku":"178-12","price":71.9,"currency_code":"EUR","in_stock":true},{"title":"24x 150ml can","offer_id":58572388467072,"sku":"178-24","price":129.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"teppich-polsterschaum-schaumreiniger-textil","title":"Carpet underlay foam","description":"\u003cp\u003eCarpet Upholstery Foam is a foam-controlled cleaner based on TEP-EX for stain removal and interim cleaning on carpets, carpeted floors, upholstered furniture, seat covers, and fabric car seats. Foam application introduces less moisture into the textile than spray extraction, meaning the surface can be walked on or used again significantly faster, which is crucial in hotels, offices, and vehicle detailing. The product is biodegradable, formaldehyde-free, and, with a pH value of around 7, compatible with delicate fibers. For pre-treatment of stubborn stains, a higher concentration is used.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLow moisture input – surface quickly reusable\u003c\/li\u003e\n\n\u003cli\u003eFormaldehyde-free and biodegradable\u003c\/li\u003e\n\n\u003cli\u003eEqually suitable for carpets, upholstery, and vehicle seats\u003c\/li\u003e\n\n\u003cli\u003eCan also be used for stain pre-treatment\u003c\/li\u003e\n\n\u003cli\u003eFoam-controlled – no overflowing in the machine\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eVacuum the area thoroughly. Apply foam, let it soak in briefly, and work it in with a brush, then vacuum. For stain pre-treatment, dilute 1:1 to 1:3 with water. Test materials for colorfastness in an inconspicuous area beforehand.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eStain pre-treatment 1:1 to 1:3; area cleaning according to equipment recommendation.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eA 10-liter container covers approx. 200–400 m² of textile surface, depending on the application.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAll water-resistant and colorfast carpets, upholstered furniture, rugs, seat covers, and fabric car seats.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH approx. 7 to 9 depending on concentration, formaldehyde-free. Only for water-resistant and colorfast textiles. Pre-test for colorfastness.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI number\u003c\/td\u003e\n\n\u003ctd\u003e1DP0-60MX-F00X-JUG0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e no pictogram required\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 249 Cover TEP-EX uses the same active principle for machine spray extraction with higher water input and deeper cleaning. Art. 275 Coverax Dry-Clean is dry cleaning without water.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572390203776,"sku":"249-0001","price":19.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572390236544,"sku":"249-0012","price":198.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572390269312,"sku":"249-0010","price":137.0,"currency_code":"EUR","in_stock":true},{"title":"30 L jerry can","offer_id":58572390302080,"sku":"249-0030","price":381.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572390334848,"sku":"249-0060","price":701.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-tep-ex-teppichreiniger-extraktion","title":"Cover TEP-EX","description":"\u003cp\u003eCover TEP-EX is a liquid, foam-regulated cleaner for spray extraction and stain removal on carpets and rugs, as well as for cleaning upholstered furniture, seat covers, and car seats with fabric upholstery. Foam regulation is a technical prerequisite for machine use – unregulated cleaners lead to excessive foaming in the dirty water tank and, in the worst case, damage the suction turbine. The pH value is approximately 8.5 to 9 depending on the application concentration. The product is biodegradable and formaldehyde-free, which makes it suitable for facilities with indoor air quality requirements such as schools, daycares, and care facilities.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFoam-regulated – protects machine and suction turbine\u003c\/li\u003e\n\n\u003cli\u003eFormaldehyde-free, also for daycares and clinics\u003c\/li\u003e\n\n\u003cli\u003eCan be used as an extraction agent and stain remover\u003c\/li\u003e\n\n\u003cli\u003eVery economical: dilutable up to 1:30\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eBefore spray extraction, thoroughly vacuum the area, detach heavy soiling and stains, then quickly clean the entire area. Depending on the soiling, dilute 1:20 to 1:30 with water. For stain removal as a pre-treatment, dilute 1:1 to 1:3. Before application, test for colorfastness in an inconspicuous area.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eSpray extraction 1:20 to 1:30; Stain pre-treatment 1:1 to 1:3.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approximately 780 liters of application solution for approx. 2,000–3,000 m² of carpet area when diluted 1:25.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAll water-resistant and colorfast carpets, upholstered furniture, rugs, seat covers, car seats with fabric upholstery.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH approx. 8.5–9 in application concentration, formaldehyde-free. Only for water-resistant and colorfast textiles. Test for colorfastness beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH Value (Concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e1DP0-60MX-F00X-JUG0\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e no pictogram required\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe carpet upholstery foam is the foam-based variant with lower moisture input for interim cleaning. Art. 275 Coverax Dry-Clean cleans completely dry.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572390367616,"sku":"249B-0001","price":19.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572390400384,"sku":"249B-0012","price":198.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572390433152,"sku":"249B-0010","price":137.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572390465920,"sku":"249B-0030","price":381.0,"currency_code":"EUR","in_stock":true},{"title":"60 L container","offer_id":58572390498688,"sku":"249B-0060","price":701.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-multi-clean-fettloeser-konzentrat","title":"Covil Multi Clean","description":"\u003cp\u003eCovil Multi Clean is a water-miscible, highly concentrated safety solvent for stubborn grease-based dirt. The highly concentrated ingredients quickly and safely produce grease-free surfaces, without being extremely corrosive or toxic – for safety engineers and operations managers, this is the way to replace classic solvent chemicals in operations, without compromising cleaning performance. The product removes oil, wax, silicone, gummed oils, soot, atmospheric deposits, and brake dust. The wide range of dilution from 1:10 to 1:500 in high-pressure cleaners makes it a universal workshop concentrate: one container covers hand cleaning, spray application, and high-pressure use equally.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAlternative to hazardous solvent chemicals\u003c\/li\u003e\n\n\u003cli\u003eNot extremely corrosive or toxic with high cleaning performance\u003c\/li\u003e\n\n\u003cli\u003eDilutable from 1:10 to 1:500\u003c\/li\u003e\n\n\u003cli\u003eOne concentrate for manual, spray, immersion, and high-pressure application\u003c\/li\u003e\n\n\u003cli\u003eDissolves oil, wax, silicone, soot, and brake dust\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eHeavy soiling 1:10 with water, normal deposits 1:20 to 1:50, in high-pressure cleaner up to 1:500. Applicable by spray, wipe, or immersion method. Allow to act and rinse off.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003e1:10 (strong) to 1:50 (normal), HP device up to 1:500.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approx. 1,530 liters of application solution at 1:50; in an HP device at 1:500, approx. 15,000 liters.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eEntire industry, car workshops, forwarding agencies, bus companies, manufacturing plants, metal processing, civil engineering, mechanical engineering, warehouses, municipal depots, municipal utilities. Steel rims, construction machinery, heavily soiled engines, industrial trucks, forklifts, machines.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH 11, water-miscible. Gentle on skin and materials compared to solvent chemicals. On aluminum and non-ferrous metals, do not choose a dilution below 1:20.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH Value (Concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e11\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eC2Q0-8053-W00W-UK4H\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310 Immediately call a POISON CENTER\/doctor.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 257B Multi Clean Alka is the significantly stronger alkaline variant for extreme soiling. Art. 302 COVIL 8 is the non-water-miscible safety solvent for parts washers.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572391186816,"sku":"257A-0001","price":16.6,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572391219584,"sku":"257A-0012","price":167.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572391252352,"sku":"257A-0010","price":115.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canisters","offer_id":58572391285120,"sku":"257A-0030","price":321.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572391317888,"sku":"257A-0060","price":590.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-8-sicherheitsloesemittel-kaltreiniger","title":"Covil 8","description":"\u003cp\u003eCovil 8 is a safety solvent made from a mixture of synthetic isoparaffins in the isoaliphatic range. As a non-polar compound, it is water-insoluble, miscible with most solvents in any proportion, and biodegradable. The decisive difference to classic cold cleaners lies in its aromatic-free nature: the odor is exceptionally mild, making spraying and misting practical in workshops and halls. Covil 8 is demulsifying, does not combine with water, and can be separated at any time via an oil separator; the product is considered slightly hazardous to water, and its evaporation number is 82. Glass, metal, paints, and plastics are not attacked. Depending on the environment, corrosion protection of approximately 8 to 14 days remains on the cleaned surface, which is advantageous for maintenance work with subsequent downtime. Please note the hazardous substance classification with the signal word Danger (H226, H304, H336).\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAromatic-free and thus exceptionally mild in odor\u003c\/li\u003e\n\n\u003cli\u003eDemulsifying, separation via oil separator possible\u003c\/li\u003e\n\n\u003cli\u003eCorrosion protection for approximately 8 to 14 days\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack glass, metal, paints, and plastics\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable according to DIN, slightly hazardous to water\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eUse Covil 8 undiluted by immersion, spraying, or wiping. Wet contaminated parts or surfaces, allow the solvent to act on the contamination, and let the dissolved grease, tar, and resin residues drain off or wipe them away. Repeat the process for heavy contamination. Due to the H226 classification, only work away from ignition sources and ensure adequate ventilation; observe H304, do not ingest by swallowing, H336 may cause drowsiness or dizziness. Wear respiratory protection when misting. Dispose of residues via the oil separator or industrial disposal.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eApproximately 100 to 200 ml per m² of heavily greased surface are required for wiping; a 30-liter canister is thus sufficient for approximately 150 to 300 m². In an immersion bath, the solvent can be reused multiple times until saturation. Practical guidelines, the data sheet does not specify consumption.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eCleaning of engines, machines, and systems with heavily greased surfaces, as well as removal of tar, gummed oils and greases, wax and preservatives, combustion residues, heavy oil, resin, and bitumen in maintenance, workshops, and vehicle fleets.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eDoes not attack glass, metal, paints, and plastics. Since the product dissolves waxes and preservatives, intended protective layers must be taken into account before application. For sensitive elastomers and seals, test a small area beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI number\u003c\/td\u003e\n\n\u003ctd\u003e1XT0-106Y-Q005-MXCE\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH phrases:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P370+P378; P403+P233 Store in a well-ventilated place. Keep container tightly closed.; P403+P235\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCovil 8 is the standard safety solvent for grease and oil residues. Covil 100\/S (Art. 307) is additionally electrolyte-free and thus designed for control cabinets, Covil 35 (Art. 332) is significantly more aggressive, dissolves combustion residues in heat exchangers and attacks unbaked paints.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572395217280,"sku":"302-0001","price":20.5,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572395250048,"sku":"302-0012","price":206.0,"currency_code":"EUR","in_stock":true},{"title":"10-liter canister","offer_id":58572395282816,"sku":"302-0010","price":142.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572395315584,"sku":"302-0030","price":396.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572395348352,"sku":"302-0060","price":728.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-br-liquid-bremsenreiniger-teerloeser","title":"Cover BR Liquid","description":"\u003cp\u003eCover BR Liquid is a safety solvent for rapid degreasing in workshops and maintenance. It removes residues of sealing material from sealing surfaces and flange connections, dissolves tar and rubber abrasion from solvent-resistant surfaces, and eliminates adhesive residues, dispersion paint residues, and stains from carpets and seats. This means that, in addition to classic brake cleaning, the product also covers tasks for which several special agents would otherwise be required. Cover BR Liquid degreases and cleans metal, glass, ceramics, and many plastics, and dissolves resinified residues. As a liquid in a canister, it is significantly more economical per application compared to aerosol cans and can be dispensed via a spray bottle, immersion bath, or cloth. The product is classified as highly flammable (including H225, H304, H315, H319); ignition sources must be kept away and ventilation must be ensured.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDissolves sealing residues on flanges and sealing surfaces\u003c\/li\u003e\n\n\u003cli\u003eRemoves tar, rubber abrasion, and adhesive residues\u003c\/li\u003e\n\n\u003cli\u003eLiquid in a canister instead of expensive aerosol cans\u003c\/li\u003e\n\n\u003cli\u003eDegreases metal, glass, ceramics, and many plastics\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray contaminated parts with Cover BR Liquid and allow the active ingredient to run off together with the dissolved contamination. Then allow the parts to air dry or wipe them with a dry cloth. Repeat the process for heavy soiling. Before use on plastics and painted surfaces, test in an inconspicuous area. Work only in well-ventilated areas and away from ignition sources; wear protective gloves and safety glasses. Use a drip tray and dispose of residues via the oil separator or company disposal system.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eApproximately 200 to 300 ml are required per brake cleaning on one axle; a 30-liter canister is therefore sufficient for approximately 100 to 150 axle cleanings. Practical guideline, the data sheet does not specify consumption.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAutomotive workshops, car dealerships, bus companies, freight forwarders, municipal utilities, industry, construction and agricultural machinery manufacturing and maintenance, shipping, and construction companies. Specifically for cleaning cylinders, clutch linings and parts, drum and disc brakes, brake pads, brake shoes, gasoline and oil pumps, transmissions, carburetors, springs and bushings, and for tar removal from painted surfaces.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eDegreases and cleans metal, glass, ceramics, and many plastics. Plexiglas, thermoplastics such as PVC, and simple paint coatings are dissolved and must be excluded. Before use on painted surfaces, create a test area.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H225Fl; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H315Causes; H319 Causes serious eye irritation.; H319Causes; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P301; P303; P304; P305; P310 Immediately call a POISON CENTER\/doctor.; P338; P340; P351\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCover BR Liquid is the liquid variant for continuous demand in a canister, Cover-BR (Art. 104) is available as an aerosol for specific applications on the vehicle. Covil 8 (Art. 302) has a milder odor and is more designed for large-area degreasing. Note: This data sheet is issued for variant Art. 3040002 (Covil Fleck-Ex); the information must be checked before publication.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572395446656,"sku":"304-0001","price":25.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572395479424,"sku":"304-0012","price":260.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572395512192,"sku":"304-0010","price":180.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572395544960,"sku":"304-0030","price":501.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572395577728,"sku":"304-0060","price":922.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"trennax-ms-trennmittel-gleitmittel-offen","title":"TRENNAX-MS open","description":"\u003cp\u003eTRENNAX-MS is a silicone-based release and lubricant agent available as bulk goods, meaning it's for application with a spray gun, brush, or cloth instead of an aerosol can. The product is physiologically harmless and non-toxic, has antistatic and anticorrosive properties, and combines release, lubricating, and care properties in one formulation. The ignition temperature is above 300 degrees Celsius. The technical difference from canned goods primarily lies in cost-effectiveness and application versatility: Bulk goods can be dispensed into dipping tanks, spray systems, or refill systems, which reduces costs per application for high consumption and significantly less packaging waste. In plastics, rubber, foam, and textile processing, the silicone film ensures clean demolding without sticking to tools and molded parts. In maintenance and workshop areas, the product lubricates without dripping or sticking, so that locking systems, wood and plastic mechanisms, blinds, awnings, and zippers remain functional. On tarpaulins, leather, tents, boats, and construction vehicles, the film also acts as a care and protective layer. For businesses, this means less rework on molded parts and reduced susceptibility to malfunctions in moving components.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSilicone film separates and lubricates without dripping or sticking\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature over 300 degrees Celsius\u003c\/li\u003e\n\n\u003cli\u003eAntistatic and anticorrosive properties\u003c\/li\u003e\n\n\u003cli\u003ePhysiologically harmless and non-toxic\u003c\/li\u003e\n\n\u003cli\u003eBulk goods reduce costs per application compared to aerosol\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean and dry surfaces before treatment. Spray TRENNAX-MS thinly and evenly from a distance of 30 to 50 centimeters or apply with a cloth or brush. A thin, continuous film is sufficient; too much application leads to greasy shine and adhesion. When used as a care product, polish after a short flash-off time to increase shine. Do not use on surfaces that are to be painted, glued, or printed afterwards, as silicone residues impair adhesion. When spray applying, ensure adequate ventilation, keep away from ignition sources, and do not inhale spray mist. Wear protective gloves and eye protection.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Spray thinly from a distance of 30 to 50 centimeters or apply with a cloth.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eWith thin spray application, approximately 30 to 60 milliliters cover about one square meter of tool or mold surface. One liter is therefore sufficient for about 20 to 30 square meters or several hundred individual applications on locks and mechanisms, depending on the application technique.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003ePlastics, rubber, foam, and textile processing, foundry and welding technology, paper and printing industry, locksmiths, automotive workshops, furniture manufacturing, leather processing, tent and tarpaulin manufacturing, boat building. Furniture, plastic surfaces, leather, tents and tarpaulins, rot strips, boats, diving equipment, blinds, awnings, mechanical locking systems, as well as excavators, clearing vehicles, and other construction vehicles are maintained and lubricated.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eCan be used on plastic, rubber, foam, textile, leather, wood, metal, and painted components. Not suitable for surfaces that are subsequently to be painted, glued, printed or coated, as the silicone film impairs the adhesion of paints and adhesives.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapour.; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P370+P378; P403+P233 Store in a well-ventilated place. Keep container tightly closed.; P403+P235\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eActive ingredient identical to Trennax-MS (Art. 110), which is intended as an aerosol can for targeted applications and service vehicles. Where silicone residues are problematic, for example before painting or gluing processes, Trennax OS (Art. 111) is the suitable alternative.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572397052288,"sku":"316-0001","price":30.1,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572397085056,"sku":"316-0012","price":302.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572397117824,"sku":"316-0010","price":209.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572397150592,"sku":"316-0030","price":582.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572397183360,"sku":"316-0060","price":1071.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-21-elektroreiniger-nichtleitend","title":"COVER 21","description":"\u003cp\u003eCOVER 21 is a water-free high-performance cleaner for electric motors, as well as electrical and mechanical systems. Since the product contains no electrolytes and is water-free, it remains non-conductive and can be processed under voltage. The dielectric strength is 28,000 volts, and the electrical conductivity at 20 degrees Celsius is below 10 s\/cm. The crucial difference to aqueous industrial cleaners is that no disassembly, no drying time, and no subsequent rinsing are required: COVER 21 evaporates without residue, with an evaporation rate of 21. Insulating varnishes, paint, rubber, plastics, glass, ceramics, and metals are not attacked. The odor is exceptionally mild, which facilitates use in workshops and control room environments. Due to its creeping ability of 0.726, the product is also used as a crack testing medium. Greases and dirt, for example on transmission poles of generators, are quickly dissolved. For companies, this means shorter downtimes for maintenance, as components can be cleaned on-site and immediately put back into operation.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDielectric strength up to 28,000 volts\u003c\/li\u003e\n\n\u003cli\u003eWater-free and electrolyte-free, can be processed under voltage\u003c\/li\u003e\n\n\u003cli\u003eEvaporates without residue, no rinsing required\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack insulating varnishes and plastics\u003c\/li\u003e\n\n\u003cli\u003eCan also be used as a crack testing medium\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray soiled parts evenly and wipe off the dissolved dirt. Alternatively, use a cloth soaked with COVER 21 and manually rinse or wipe the components. Then allow to evaporate completely; no post-rinsing with water is required. Before restarting live parts, wait for visible dryness. The product is flammable and can be fatal if swallowed and enters the airways. Work only in well-ventilated areas, do not inhale spray mist, keep away from ignition sources, and wear solvent-resistant protective gloves and eye protection. The relevant electrical safety rules for working on live systems must be observed.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Use neat by spraying or wiping.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eExperience shows that 30 to 50 milliliters are needed per motor, control cabinet, or assembly. A 1-liter bottle is therefore sufficient for about 20 to 30 individual cleanings, a 30-liter canister for about 600 to 1,000 applications.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eGenerators, alternators, insulators, electric motors and electrical systems. Also air conditioners, televisions, radio and computer technology, circuit boards, traffic lights and signaling equipment, capacitors, windings, motors, measuring instruments and control cabinets. Additional use as a crack testing medium.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eInsulating varnishes, paint, rubber, plastics, glass, ceramics and metals are not attacked. As this is a solvent product, a preliminary test on a hidden area is advisable for sensitive plastics and fresh coatings. Not water-based, therefore no mixing with aqueous cleaning solutions.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS08 Health hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H304 May be fatal if swallowed and enters airways.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301+P310 IF SWALLOWED: Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCOVER 32 (Art. 319) is the higher-quality variant with 52,000 volts dielectric strength, CFC- and HCFC-free, and biodegradable, recommended for higher voltages. COVER 21 (Art. 318) evaporates faster and is the economical choice for ongoing motor and control cabinet cleaning.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572398526848,"sku":"318-0001","price":19.8,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572398559616,"sku":"318-0012","price":199.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572398592384,"sku":"318-0010","price":138.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572398625152,"sku":"318-0030","price":384.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572398657920,"sku":"318-0060","price":706.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-35-kaltreiniger-bitumen-teer","title":"COVIL 35","description":"\u003cp\u003eCOVIL 35 is a special cold cleaner based on a multi-component mixture in the isoaliphatic range. As a non-polar compound, the product is water-insoluble and demulsifying, so that separation via an oil separator remains possible at all times, simplifying its use in workshops with separator systems. The evaporation rate is 35, the water hazard class is 2, and it is an A-II product. Its particular strength lies in the internal cleaning of heat exchangers: combustion residues 5 to 10 millimeters thick are dissolved in 30 to 35 minutes without mechanical processing; the heat exchanger is filled, the dwell time is awaited, and the dissolved deposits are then flushed out. In addition, COVIL 35 dissolves tar and bitumen from solvent-resistant surfaces, as well as oil carbon, resinified oils and greases, PE waxes, preservatives, heavy oil, resin, microwaxes, rosin, epoxy resin, alkyd resin, polyurethane, and acrylates. The product dries residue-free after airing and has a mild odor, which facilitates spraying and misting.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDissolves 5 to 10 millimeters of combustion residues without mechanical action\u003c\/li\u003e\n\n\u003cli\u003eDemulsifying, separable via oil separator\u003c\/li\u003e\n\n\u003cli\u003eDries residue-free after airing\u003c\/li\u003e\n\n\u003cli\u003eMild odor, good for spraying and misting\u003c\/li\u003e\n\n\u003cli\u003eDissolves tar, bitumen, oil carbon, resins, and PU foam\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eUse undiluted by immersion, spraying, or wiping. For heat exchanger cleaning, fill the interior with COVIL 35, let it soak for 30 to 35 minutes, and then remove the dissolved deposits by flushing. For surfaces with tar and bitumen adhesion, spray on, let it soak, and then remove the dissolved coating. Caution: The product dissolves non-baked-on lacquers; for painted components, first test in an inconspicuous area. Liquid and vapor are flammable; the product can be fatal if swallowed and enters the airways, causes skin irritation and serious eye damage. Keep away from ignition sources, ensure adequate ventilation, wear solvent-resistant gloves and safety goggles.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Use undiluted by immersion, spraying, or wiping.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eFor heat exchanger cleaning, the requirement depends on the internal volume; a 30-liter canister fills a proportionally sized exchanger. For surface cleaning, approximately 0.2 to 0.3 liters per square meter is sufficient, meaning a 10-liter canister covers about 30 to 50 square meters of heavily greased surfaces.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eInteriors of heat exchangers, engines, machines and systems with heavily greased surfaces, printing rollers, printing blankets, clichés and screens, as well as surfaces with tar and bitumen adhesion.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor all solvent-resistant surfaces and metals. Caution: Non-baked-on lacquers are dissolved, as are preservatives, PE waxes, and various resins. Do not use on sensitive plastics, rubber, and freshly painted components without prior testing. Demulsifying, therefore separable via an oil separator.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e3HW0-60WV-W001-F5UC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H335 May cause respiratory irritation.; H336 May cause drowsiness or dizziness.; H360D\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P241 Use explosion-proof electrical\/ventilating\/lighting equipment.; P243; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P301; P310 Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eASPHALT-EX WM (Art. 339) is the water-miscible version, which can be rinsed off and is intended for vehicles and tools in road construction. COVIL 35 (Art. 332) is water-insoluble and a stronger solvent, especially for heat exchangers and printing technology. COVIL 35-K (Art. 332K) is the version as an adhesive remover.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572399903104,"sku":"332-0001","price":22.2,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572399935872,"sku":"332-0012","price":223.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572399968640,"sku":"332-0010","price":154.5,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572400001408,"sku":"332-0030","price":429.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572400034176,"sku":"332-0060","price":789.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"asphalt-ex-wm-asphaltloeser-wassermischbar","title":"ASPHALT-EX WM","description":"\u003cp\u003eASPHALT-EX WM is a water-miscible tar and asphalt remover based on a multi-component mixture in the isoaliphatic range. In contrast to classic water-insoluble cold cleaners, the product is water-soluble and forms a white emulsion when rinsed off, allowing dissolved tar and bitumen to be carried away with the rinse water instead of smearing on the surface. The product is readily biodegradable and dissolves tar, asphalt, and bitumen, as well as oils and greases. It is ideally suited for vehicles and equipment in road construction, such as trucks, flatbed trucks, rollers, asphalt pavers, and tools, where daily bitumen residues occur and need to be removed quickly before they harden. Since the product has a mild odor, it is well-suited for spraying and nebulizing, even in halls and wash bays. When using high-pressure cleaners, manual removal of contamination can often be avoided, which significantly reduces the time required per vehicle.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eWater-soluble, rinses off as a white emulsion\u003c\/li\u003e\n\n\u003cli\u003eReadily biodegradable according to manufacturer specifications\u003c\/li\u003e\n\n\u003cli\u003eDissolves tar, asphalt, bitumen, as well as oils and greases\u003c\/li\u003e\n\n\u003cli\u003eMild odor, easily sprayable and nebulizable\u003c\/li\u003e\n\n\u003cli\u003eOften no manual labor with high-pressure cleaner\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpray ASPHALT-EX WM undiluted onto the soiled surface. For lighter soiling, the product can be diluted with water up to 1:10. Allow to act, then loosen tar and asphalt with a brush, sponge, or similar tool and rinse with water. Rinse until the white emulsion is completely flushed away. When using high-pressure cleaners, manual loosening may not be necessary. Processing is possible by dipping, spraying, or wiping. Direct rinse water through a suitable separator and observe local drainage regulations. Wear protective gloves and eye protection, ensure adequate ventilation.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eSpray undiluted. For lighter soiling, can be diluted up to 1:10 with water.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eWhen sprayed undiluted at approximately 0.2 to 0.4 liters per square meter, one liter is sufficient for about 3 to 5 square meters of heavily bitumen-contaminated surface. For a 1:10 diluted application on light residues, the treatable area increases significantly accordingly.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eTrucks and flatbed trucks, rollers, asphalt pavers, hand tools, and small equipment in road construction. Furthermore, all solvent-resistant surfaces with tar and bitumen residues such as metal, masonry, and aluminum.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for solvent-resistant surfaces such as metal, masonry, and aluminum. For painted components, plastics, and rubber, test in an inconspicuous area beforehand. Rinse treated surfaces thoroughly until the white emulsion is completely removed.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eCOVIL 35 (Art. 332) is the water-insoluble, stronger dissolving variant for heat exchangers and resinified residues, but cannot be rinsed off. ASPHALT-EX WM (Art. 339) is the water-miscible solution for daily vehicle and equipment degreasing in road construction. As a preventive measure, COVIL-ASPHALT-TRENN-WM (Art. 920) prevents adhesion in advance.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1L bottle","offer_id":58572400361856,"sku":"339-0001","price":20.6,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572400394624,"sku":"339-0012","price":217.9,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572400427392,"sku":"339-0010","price":157.9,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572400460160,"sku":"339-0030","price":438.9,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572400492928,"sku":"339-0060","price":807.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"oelzieher-gel-oelflecken-stein-beton","title":"Oil Puller Gel","description":"\u003cp\u003eOil Puller Gel is a special gel for removing oil stains from alkali-resistant surfaces. It is applied as a paste-like layer to the stained area and extracts oil and oil residues from the subsurface within approximately 24 hours, without any mechanical processing. The difference from liquid degreasers lies in its retention time: because the gel does not run off and does not dry out prematurely, it works deeply for hours and even extracts old oil that has already penetrated concrete or screed. In addition, the product is suitable for removing fire soot and fire oil residues, as well as for eliminating fire odors caused by stubborn contaminants. For businesses, this means that remediation after oil damage or fires is possible without milling or sanding the floor. The area remains unused during the exposure time, after which a simple rinse is sufficient, ideally with a hot water high-pressure cleaner.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtracts oil in about 24 hours without mechanics\u003c\/li\u003e\n\n\u003cli\u003eRemains as a gel and does not dry out prematurely\u003c\/li\u003e\n\n\u003cli\u003eAlso effective against fire soot and fire oil residues\u003c\/li\u003e\n\n\u003cli\u003eReduces fire odors from stubborn contaminants\u003c\/li\u003e\n\n\u003cli\u003eContainer sizes from 1 kg to 66 kg available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean the surface of loose dirt and test material compatibility beforehand in an inconspicuous area. Apply Oil Puller Gel evenly to the area to be treated with a brush, swab, or rubber squeegee. Then cover if necessary so that the gel can optimally combine with the stain and does not dry out prematurely. After about 24 hours of exposure, rinse the surface with water, if possible with a hot water high-pressure cleaner. Repeat the process for heavy soiling. Do not enter the treated area during the exposure time and keep it cordoned off. After treatment, the manufacturer recommends an oleophobic impregnation to prevent renewed oil penetration. Wear protective gloves.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDepending on the layer thickness and absorbency of the substrate, approximately 0.5 to 1 kg per square meter should be planned. The 1 kg can therefore covers about one to two square meters of stained area, and the 33 kg canister about 33 to 66 m².\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eWorkshop and hall floors, garages and underground car parks, parking spaces and courtyards, terraces as well as areas after fire damage with soot and fire oil residues.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for all alkali-resistant surfaces such as concrete, cement, tiles, stoneware, artificial stone, and wood. Not for alkali-sensitive coverings. Material compatibility must be tested in an inconspicuous area before application, and the treated area must not be entered during the exposure time.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCovil Öl-Ex Liquid (Art. 354) is poured on as a liquid, gels on the surface, and is brushed off dry, making it the faster solution for applications without a water connection. Oil Puller Gel requires approximately 24 hours of retention time and subsequent rinsing, but it also extracts deeply absorbed old oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572405473664,"sku":"358-0010","price":179.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"foamer-24-l-schaumgeraet-edelstahltank","title":"Foamer 24 L Stainless Steel","description":"\u003cp\u003eThe Foamer 24 L is a foaming device with a stainless steel tank, pressurized with compressed air via a compressor. It produces a thick, rich foam that stays on the surface longer, allowing for extended contact times of the cleaner. Since the device comes with both a foam and a mist spray head, it can be used as a foamer or a mister. The difference to hand-pumped pressure sprayers lies in the tank volume and constant operating pressure: 24 liters capacity and up to 8 bar from the compressed air network mean continuous operation without re-pumping. The scope of delivery includes a compressed air connection with quick coupling, pressure gauge, overpressure valve, mixing valve for air and product supply, pressure regulator, a 750 mm stainless steel lance, and a 10 m long, extendable hose. For businesses, this means high area coverage per filling and a robust design for daily use in production and vehicle cleaning.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e24 liter stainless steel tank capacity\u003c\/li\u003e\n\n\u003cli\u003eThick foam with long contact time\u003c\/li\u003e\n\n\u003cli\u003eCan be used as a foamer or mister\u003c\/li\u003e\n\n\u003cli\u003eConstant operating pressure up to 8 bar from the compressed air network\u003c\/li\u003e\n\n\u003cli\u003e10 m hose and 750 mm lance included\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003ePlace the device on a level surface and fill the prepared cleaning solution into the stainless steel tank; dilute according to the cleaner's specifications. Close the tank, connect the compressed air hose via the quick coupling, and set the pressure on the pressure regulator, maximum 8 bar. Depending on the task, attach the foam or mist spray head. Adjust the ratio of air and product supply using the mixing valve and foam the surface from bottom to top. Allow the cleaner to act, do not let it dry, then rinse. After use, release pressure via the overpressure valve, rinse the device with clear water, and empty the hose and lance. When using cleaners with hazardous substance labeling, wear protective gloves, safety glasses, and suitable work clothing.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eNot a dosing product. The cleaning solution is prepared according to the specifications of the concentrate used and filled into the 24-liter tank.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 24-liter tank filling of application solution covers approximately 200 to 400 m² of surface, depending on the foam application and substrate.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eProduction and food processing facilities, commercial kitchens, slaughterhouses and cutting plants, vehicle and wash bays, facade and hall surfaces, and wherever a compressed air connection is available.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eStainless steel tank, 750 mm stainless steel lance, maximum operating pressure 8 bar. Suitable for cleaning solutions that are compatible with stainless steel and the built-in seals; for highly acidic or chloride-containing products, check resistance beforehand and rinse the device after each use.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe 2.8 liter foam device (Art. 407) works with integrated dilution at the water connection and is intended for smaller areas. The foam polysprayer (Art. 401) with 1.5 liters covers specific tasks. The Foamer 24 L is the solution for large areas with an existing compressed air network.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 piece","offer_id":58572406030720,"sku":"399-01","price":39.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"drucksprueher-15-liter-spruehgeraet","title":"Pressure sprayer","description":"\u003cp\u003eThe pressure sprayer is a professional spray device for chemicals with a filling volume of 1.5 litres. It is designed for products with a pH value of 7 to 12, or alternatively for the acidic range of 2 to 7, thus covering the majority of commercial cleaning chemicals. With foaming products, the device produces extreme foam according to the data sheet. The foam strength is controlled by four inserts in the nozzle, which can be removed individually: from dry standing foam to wet spray application. The difference to simple hand spray bottles lies in the pump pressure container, which delivers a consistent spray over an entire filling, instead of diminishing with each pump. For businesses, this means consistent product application, lower consumption, and less fatigue during longer cleaning operations. The device works without compressed air or water connection and is therefore also suitable for outdoor use and changing objects.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eConsistent spray pattern over the entire filling\u003c\/li\u003e\n\n\u003cli\u003eFor products from pH 7 to 12 or pH 2 to 7\u003c\/li\u003e\n\n\u003cli\u003eFour nozzle inserts for adjustable foam strength\u003c\/li\u003e\n\n\u003cli\u003eWorks without compressed air and water connection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eFill the mixed cleaning solution into the 1.5-litre container and ensure that the pH value is within the permitted range. Close the container and build up pressure using the hand pump. For foaming products, adjust the foam strength using the inserts in the nozzle; for wetter application, remove individual inserts. Wet the surface evenly, observe the cleaner's reaction time and do not let it dry, then wipe or rinse off. After use, release residual pressure, rinse the device with clear water, and store it dry. Label the device permanently with the product used to avoid confusion. For cleaners with hazardous substance labelling, wear protective gloves and safety glasses.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eNot a dosing product. The cleaning solution is mixed according to the specifications of the concentrate used and filled into the 1.5-litre container.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eOne filling of 1.5 litres is sufficient for approximately 15 to 30 m² of surface, depending on the application amount.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eSanitary and kitchen areas, floor stains, machines and tools, vehicle bodies and rims, as well as targeted treatments with concentrates and ready-to-use solutions.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003ePlastic design with pump pressure container, suitable for products with a pH value of 7 to 12, or alternatively from 2 to 7. Not for solvent-containing products or chemicals outside this pH range. Rinse after each use to prevent damage to seals and nozzle.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003ePressure sprayer and foam poly sprayer both refer to the 1.5-litre device (Art. 401); the foam poly sprayer is configured for foaming application. For large areas with a compressed air network, the Foamer 24 L Stainless Steel (Art. 399) is intended.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 piece","offer_id":58572406423936,"sku":"401B-01","price":14.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"schaumgeraet-28-liter-schaumspruehgeraet","title":"Foam unit 2.8 liters","description":"\u003cp\u003eThe 2.8 liter foam unit is a foam sprayer with integrated dosing for concentrates. The container capacity is 2.6 liters, an option with 1.4 liters is available upon request. Dosing is done via a dilution nipple in the suction hose: The concentrate is filled undiluted and is only mixed with water in a defined ratio during the spraying process. This is precisely the difference from devices into which a pre-mixed solution is filled. For businesses, this means less preparation work, reproducible concentration independent of operating personnel, and significantly more spray output per container filling, because only concentrate is carried. The device is designed for tasks with a large surface area, such as truck cleaning, facade cleaning, and commercial kitchen cleaning. The applied foam remains on vertical surfaces and gives the cleaner the necessary contact time without the product running off immediately.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDoses concentrate via a dilution nipple in the suction hose\u003c\/li\u003e\n\n\u003cli\u003eReproducible concentration independent of the operator\u003c\/li\u003e\n\n\u003cli\u003eHigh spray output per container filling\u003c\/li\u003e\n\n\u003cli\u003eOptionally with 2.6 or 1.4 liters container capacity\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eFill concentrate into the container and select the dilution nipple in the suction hose according to the desired dilution. Connect the device to the water supply and uniformly foam the surface from bottom to top to prevent dirt streaks. Observe the contact time of the respective cleaner and do not let the foam dry. Then rinse thoroughly with clear water, mechanically rework in case of heavy adhesion, and repeat the process. After use, rinse the container and suction hose with clear water to prevent the dilution nipple from clogging. When using cleaners with hazardous substance labeling, wear protective gloves, safety glasses, and suitable work clothing.\u003c\/p\u003e\n\u003ch3\u003eDosing\u003c\/h3\u003e\n\u003cp\u003eNot a dosing product. The dilution of the filled concentrate is determined by the dilution nipple in the suction hose.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eA container filling of 2.6 liters of concentrate yields a multiple of foam solution, depending on the selected dilution nipple, and is thus sufficient for several hundred square meters of spray area.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eTruck and commercial vehicle cleaning, facade cleaning, commercial kitchen cleaning, as well as hall, machine, and wall surfaces with a large surface area.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eContainer for concentrates with 2.6 liters capacity, alternatively 1.4 liters. Before using highly acidic or highly alkaline products, check the resistance of the container, hose, and seals. Rinse after each use to keep the dilution nipple clear.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eThe foam polysprayer (Art. 401) holds 1.5 liters of pre-mixed solution and is intended for targeted work. The Foamer 24 L stainless steel (Art. 399) works with compressed air and covers large areas. The 2.8 liter foam unit is in between and doses the concentrate itself.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 piece","offer_id":58572406587776,"sku":"407-01","price":135.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"bio-oelbinder-calciumsulfat-granulat-rutschfest","title":"Organic Oil Absorbent","description":"\u003cp\u003eBio-Ölbinder is a binder for leaked liquids based on pure calcium sulfate. The granules contain no chemical additives, are biodegradable, and pH-neutral. It has been tested by the Hygiene Institute and the State Materials Testing Office of North Rhine-Westphalia and approved according to the guidelines of the Oil Binder Requirements Testing Methods. The product differs from simple mineral scattering materials due to its special granule composition: oils of various viscosities, lubricants, fuels, antifreeze, brake fluids, solvents, paints, and greases are bound securely and very quickly. The granules are non-toxic, low-dust, and non-slip. This is doubly relevant for businesses: the risk of slipping on the affected surface is immediately mitigated, and the risk of fire from leaked fuels and operating fluids is reduced. The low dust content also reduces the exposure of employees during spreading and sweeping. Consumption is economical; an area of approximately 40 square meters can be covered with 20 kilograms. This makes the product suitable for storage in emergency stations as well as for the daily removal of smaller leaks.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePure calcium sulfate without chemical additives, pH-neutral\u003c\/li\u003e\n\n\u003cli\u003eApproved according to the Oil Binder Requirements Testing Methods, tested by the Materials Testing Office\u003c\/li\u003e\n\n\u003cli\u003eLow-dust and non-slip, immediately mitigates fall hazards\u003c\/li\u003e\n\n\u003cli\u003e20 kilograms cover approximately 40 square meters\u003c\/li\u003e\n\n\u003cli\u003eAlso binds fuels, solvents, paints, and greases\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eSpread Bio-Oil Binder over the spilled liquid, covering the entire affected area, depending on the degree of contamination, and allow it to absorb. As soon as the granules darken, saturation is reached. Then, collect the saturated granules with a broom and shovel or a sweeping machine. For heavy contamination, repeat the process. Used oil binders must be disposed of according to the waste code number. If substances other than oils have been bound, the respective substance must be named during disposal, with a note that it is bound to a binding agent. Any remaining lubricant films on the surface should then be cleaned with an alkaline floor cleaner. Store containers in a dry place.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003e20 kilograms of Bio-Oil Binder are sufficient for an area of approximately 40 square meters, depending on the degree of contamination. A pallet with 40 bags of 20 kilograms each can therefore theoretically cover about 1,600 square meters of leakage area.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eWorkshops, gas stations, freight forwarders, construction yards, fire departments, customer service vehicles, machine and production halls, garages, storage areas, washing areas, and company depots.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eCan be used on absorbent and non-absorbent floors such as concrete, screed, asphalt, and industrial coverings. Binds oils of various viscosities, lubricants, fuels, antifreeze, brake fluids, solvents, paints, and greases. Since the granules are based on calcium sulfate, they are pH-neutral and do not chemically attack surfaces. Not a substitute for professional cleaning of residual lubricant film and not intended for binding reactive or hot media.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eItem 929 Covil SORB Oil Absorbent Cloth binds locally on machines and in drip trays, while Item 461 is the scattering granule for surfaces and larger leaks. Item 501 Covil Absorber, on the other hand, is designed for aqueous liquids and bodily fluids, not for oils.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"11 kg canister","offer_id":58572408717696,"sku":"461-0011","price":91.5,"currency_code":"EUR","in_stock":true},{"title":"20 kg canister","offer_id":58572408750464,"sku":"461-0020","price":154.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"kuehlerfrostschutz-blau-g12-konzentrat","title":"Coverax Radiator Antifreeze Blue","description":"\u003cp\u003eCoverax Radiator Antifreeze Blue is an ethylene glycol-based radiator antifreeze concentrate that is used as an alternative to G 12 + and meets the requirements of many vehicle manufacturers. The corrosion protection is based on organic acid inhibitors, the product is free of amine, nitrite, phosphate, borate, and silicate and is miscible with other radiator antifreezes. When used correctly, it provides corrosion protection for over 250,000 kilometers in cars and up to 500,000 kilometers in trucks. In the corrosion tests according to ASTM D 3306, ASTM D 4340, and ASTM D 2570, the measured weight losses for copper, solder, brass, steel, cast iron, and aluminum are significantly below the permissible limits. The product exceeds the requirements of numerous standards, including ASTM D 3306, ASTM D 4985, SAE J 1034, BS 6580, AFNOR NF R 15-601, CUNA NC 956-16, UNE 26361-88, JIS K 2234, and NATO S 759, as well as a number of OEM specifications from Ford, GM, MAN, Mercedes-Benz, Volvo, John Deere, and VAG, among others. For fleet operators, the broad approval means that one type is sufficient for mixed fleets.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSilicate-, nitrite-, amine-, phosphate-, and borate-free\u003c\/li\u003e\n\n\u003cli\u003eCorrosion protection up to 250,000 km for cars, 500,000 km for trucks\u003c\/li\u003e\n\n\u003cli\u003eValues in ASTM D 3306 and D 2570 significantly below limit values\u003c\/li\u003e\n\n\u003cli\u003eMiscible with other radiator antifreezes\u003c\/li\u003e\n\n\u003cli\u003eBroad OEM approval for mixed fleets\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eFor effective protection, completely drain the cooling system before refilling and flush with clean water. Then prepare the required concentration according to the mixing table and fill it into the cooling system. It is recommended to have this done by a specialist to avoid improper application. After filling, bleed the system, check the expansion tank level when warm and cold, and control the freezing point with a refractometer. Before filling, compare the vehicle manufacturer's approval with the coolant specification used. Ethylene glycol is harmful if swallowed, avoid contact with skin and eyes, and dispose of used coolant according to the waste code.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eConcentrate, prepare with water according to the mixing table: 25% by volume yields minus 12 °C, 33% by volume minus 22 °C, 40% by volume minus 27 °C, 50% by volume minus 40 °C, and 60% by volume minus 56 °C freezing point.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 20-liter canister yields about 40 liters of coolant with frost protection down to minus 40 °C at 50% by volume, and about 50 liters down to minus 27 °C at 40% by volume. This is enough to completely fill about five to seven car cooling systems.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eCooling systems of cars, trucks, buses, agricultural and construction machinery, as well as stationary engines and aggregates. Used for coolant changes, system repairs, seasonal preparation, and refilling after maintenance.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eEthylene glycol-based with organic acid inhibitors, free of amine, nitrite, phosphate, borate, and silicate. Protects copper, solder, brass, steel, cast iron, and aluminum with weight losses significantly below ASTM limits. Miscible with other radiator antifreezes, the vehicle manufacturer's approval is decisive. Do not fill undiluted and do not use in windshield washer systems.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 534 Windshield Antifreeze -70° is intended for windshield washer systems and must not enter the cooling system. Art. 464 is exclusively coolant and corrosion protection for the engine circuit. Art. 535 Windshield De-icer is intended for de-icing windows.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor sale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572408947072,"sku":"464-0001","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572408979840,"sku":"464-0012","price":151.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572409012608,"sku":"464-0010","price":105.0,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572409045376,"sku":"464-0030","price":291.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572409078144,"sku":"464-0060","price":535.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"coverax-enzym-clean-enzymreiniger-pulver","title":"Coverax Enzyme-Clean","description":"\u003cp\u003eCoverax Enzym-Clean is an enzyme-based cleaner supplied as a powder and prepared with lukewarm water. The enzymes break down organic compounds into micro-fragments, allowing dirt to dissolve without scrubbing or mechanical action. It removes grease, oil, soot, nicotine, mold, blood, food stains, road grime, and environmental deposits. In parallel, the product eliminates unpleasant odors in sanitary facilities, on seats and furniture, in car seats, shoes, drains, dishwashers and washing machines, as well as pet odors, stagnant water odors, and sweat odors. The difference to surfactant-based cleaners lies in the working principle: instead of just detaching dirt, the enzymes break down the odor-forming organic substance, so that odors are not masked but eliminated at their source. The price for this is time; the exposure time ranges from 10 minutes to 24 hours. For businesses, this is relevant where mechanical processing is not possible, such as in upholstery, textiles, drains, and hard-to-reach parts of equipment.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEnzymatic decomposition without scrubbing\u003c\/li\u003e\n\n\u003cli\u003eEliminates the source of odors instead of masking them\u003c\/li\u003e\n\n\u003cli\u003e20 grams per liter, 1 kilogram yields 50 liters of solution\u003c\/li\u003e\n\n\u003cli\u003eAlso for upholstery, textiles, drains, and machines\u003c\/li\u003e\n\n\u003cli\u003ePowder form saves transport and storage volume\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eMix 200 grams of powder with 10 liters of water, corresponding to 20 grams per liter. Dissolve the powder in lukewarm water and stir until completely dissolved. Spray the finished mixture onto the surfaces to be cleaned. Enzymes require time for decomposition; the exposure time ranges from 10 minutes to 24 hours, depending on the contamination. Keep the surface moist during the exposure time, then wipe or vacuum. For application, pressure sprayer Art. 401 is recommended. Do not use hot water, as enzymes are thermally damaged. Do not use on wool. Use the prepared solution promptly and store the powder in a dry place.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003e200 grams of powder per 10 liters of water, corresponding to 20 grams per liter. Dissolve completely in lukewarm water.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003e1 kilogram of powder yields approximately 50 liters of cleaning solution at 20 grams per liter. A 5-kilogram container thus corresponds to about 250 liters of ready-to-use solution.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eFloors, ceilings, tiles, windows, frames, doors, fireplace glass, radiators, escalators, railings, elevators, machines, production facilities, tools, engines, aluminum and steel rims, carpets, upholstery, awnings, work clothes, car seats, as well as dog and cat beds.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eWidely applicable on hard surfaces, textiles, upholstery, and plastics. Also suitable for laundry, but explicitly not for wool. Do not use hot water, as enzyme activity will otherwise be lost. For delicate textiles and dyes, pre-test in an inconspicuous area.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 805 Cover-Zym and Art. 804 Covil Bio-Clean also work biologically but are supplied in liquid form. Art. 502 is the powder variant with the lowest transport and storage volume per liter of application solution and is designed for flexible on-site preparation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 100g tin","offer_id":58572409799040,"sku":"502-01","price":9.7,"currency_code":"EUR","in_stock":true},{"title":"12x 100g can","offer_id":58572409831808,"sku":"502-12","price":11.6,"currency_code":"EUR","in_stock":true}]},{"product_id":"glanztrockner-wachs-konservierer-waschanlage","title":"Gloss dryer","description":"\u003cp\u003eGlanztrockner is a preservative based on special waxes. The waxes, with the help of cationic surfactants, deposit in a thin layer on the paint surface, forming an even, long-lasting protective film. This film shortens the drying time because water beads off instead of staying flat, and protects the paint from environmental influences between washes. At the prescribed dosage, rubber, metals, paints, and other water-resistant materials are neither attacked nor corroded. The difference from pure drying aids lies in the preserving effect: in addition to faster drying, a protective wax layer remains on the paint. For car washes and fleets, this means shorter downtime during the drying phase, fewer water spots on dark paints, and a recurring build-up of paint protection with each wash. The product can be applied in car washes, high-pressure cleaners, with high-pressure sprayers, and also by hand with a brush or sponge, as the ready-to-use solution spreads very well over surfaces.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSpecial waxes form a long-lasting protective film\u003c\/li\u003e\n\n\u003cli\u003e30 to 60 cubic centimeters per 10 liters of water\u003c\/li\u003e\n\n\u003cli\u003eShortens drying time due to beading effect\u003c\/li\u003e\n\n\u003cli\u003eFor car washes, high-pressure cleaners, and manual application\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack rubber, metals, and paints when dosed correctly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eThoroughly clean surfaces with car shampoo before application. Then, spray the solution as a protective film on surfaces and materials in the car wash, with a high-pressure cleaner, or with a high-pressure sprayer like Art. 400. Alternatively, spread by hand with a brush or sponge. Do not apply in direct sunlight or when it's cold, as this can lead to uneven film formation and spotting. Then, let it air dry or use a blower. Adhere strictly to the dosage; an excessively high or low dosage will impair the film's repellent properties. Protect the concentrate from frost and store containers tightly closed.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eThe concentration exiting the spray jet should be 30 to 60 cubic centimeters per 10 liters of water. Adhere strictly to the dosage, as over- or under-dosing impairs the repellent properties.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 20-liter canister, at 45 cubic centimeters per 10 liters of water, yields approximately 4,400 liters of application solution. With about 2 liters of spray solution per car, this corresponds mathematically to more than 2,000 vehicle conservations.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAutomatic car washes, car wash tunnels, self-service car washes, high-pressure cleaners in workshops and fleets, preparation areas, and the preservation of cars, vans, trucks, buses, and trailers.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eAt the prescribed dosage, rubber, metals, paints, and other water-resistant materials are not attacked or corroded. Do not apply in direct sunlight or when it's cold. Do not use on windshields in the wiper area, as the wax film can lead to streaking. Protect concentrate from frost.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 901 Active Foam Shampoo and Art. 901A Wax Shampoo handle the washing step, with Art. 525 following as the preservation and drying step. Art. 145 Cover Nano-Wax is the ready-to-use option for individual vehicle care, while Art. 525 is the concentrate solution for car washes and fleets.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572411896192,"sku":"525-0001","price":16.6,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572411928960,"sku":"525-0010","price":107.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"scheibenfrostschutz-70-scheibenreiniger-citrus","title":"Windshield Antifreeze -70°","description":"\u003cp\u003eWindscreen antifreeze -70° is a citrus windscreen cleaner concentrate with antifreeze for year-round use in vehicle fleets. In summer, the product removes insect residues and road dirt from the windscreen; in winter, it protects the washer fluid from freezing. The main difference to simple summer washer fluid additives is the adjustable temperature range: depending on the mixing ratio, the antifreeze protection ranges from -10 °C to a pure -70 °C. The same batch thus covers mild winters in lowlands as well as high-altitude operations or cold storage transport, without the need to stock two separate products. Inventory, ordering effort, and risk of confusion in operation are reduced accordingly. In addition, the product can be used pure as a defroster on icy windscreens and as a door lock de-icer. For businesses, this means shorter set-up times in the morning, less downtime due to frozen wiper systems, and a lower risk of accidents due to smeared or frozen windscreens. Can be used in cars, buses, trucks, and construction machinery. The product is flammable and harmful if swallowed; relevant storage and handling regulations must be observed.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAntifreeze continuously adjustable from -10 °C to -70 °C\u003c\/li\u003e\n\n\u003cli\u003eOne product for summer and winter operation in vehicle fleets\u003c\/li\u003e\n\n\u003cli\u003eRemoves insect residues and road film in the washer fluid\u003c\/li\u003e\n\n\u003cli\u003eCan be used pure as a defroster and door lock de-icer\u003c\/li\u003e\n\n\u003cli\u003eReduces downtime due to frozen wiper systems\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eEmpty the washer fluid reservoir as much as possible before refilling so that the desired mixing ratio is actually achieved. Mix the product with water according to the required temperature range and fill; then briefly operate the washer system so that lines and nozzles are flushed and also protected against frost. As a defroster, apply the product pure to the frozen windscreen, let it work briefly, and remove the melted ice with a squeegee. As a door lock de-icer, spray pure into the lock. When de-icing, activate the windscreen heater and ventilation to prevent fogging on the inside. Liquid and vapor are highly flammable: do not use near ignition sources, ensure adequate ventilation in halls. Avoid swallowing, avoid eye contact, in case of eye contact rinse thoroughly with water.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003ePure up to -70 °C, 1:1 up to -30 °C, 1:2 up to -20 °C, 1:3 up to -15 °C, 1:4 up to -10 °C. As a defroster and door lock de-icer pure.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 10-liter container yields approx. 50 liters of washer fluid with antifreeze up to -10 °C at 1:4, and approx. 20 liters with protection up to -30 °C at 1:1. Pure as a defroster, approx. 50 ml per windscreen is sufficient, so a 10-liter container covers approx. 200 de-icing applications.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eCar, van, and truck fleets, bus companies, construction and municipal machinery, winter service vehicles, factory yards, and company fuel stations. Can be used wherever windscreens need to be cleared of ice or kept free of insects and road film year-round, additionally on icy door locks.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for vehicle windscreens, washer fluid reservoirs, and washer systems. Avoid contact with ignition sources and open flames. On solvent-sensitive plastic, rubber, and painted parts, as well as on freshly painted surfaces, test in a hidden area beforehand; avoid prolonged contact with paint.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H302 Harmful if swallowed.; H319 Causes serious eye irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P233 Keep container tightly closed.; P240; P262; P305; P338; P351; P403\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe windscreen de-icer (Art. 535) is sprayed pure onto the frozen windscreen and acts locally; Art. 534, on the other hand, is a dilutable washer fluid concentrate for continuous operation in the tank. Cover Scheibenklar (Art. 233) cleans without antifreeze and is therefore the pure summer variant.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572411961728,"sku":"534-0001","price":11.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L Carton","offer_id":58572411994496,"sku":"534-0012","price":120.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572412027264,"sku":"534-0010","price":83.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572412060032,"sku":"534-0030","price":231.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572412092800,"sku":"534-0060","price":425.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"scheibenenteiser-winterdienst-fuhrpark","title":"Windshield De-icer","description":"\u003cp\u003eWindscreen de-icer is a highly effective windscreen cleaning product that thaws frozen windscreens within seconds. Frozen and additionally smeared windows are a frequently underestimated accident risk in commercial fleets, because drivers leave under time pressure before visibility is completely clear. The difference to mechanical ice scraping lies in speed and material protection: the product chemically dissolves the ice layer, so that it can be removed with the rubber lip without effort. Scratches on windows and damaged windscreen wipers, as they occur when scraping on thick ice, are thus avoided. According to the data sheet, the product is glass, paint, rubber and plastic compatible, so it can also be used in the area of seals and attachments. For companies with many vehicles, this means significantly shorter departure preparation on frosty days and fewer delays in tour schedules. The product is highly flammable and harmful if swallowed, storage and handling must be regulated accordingly.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eThaws frozen windows in seconds\u003c\/li\u003e\n\n\u003cli\u003eGlass, paint, rubber and plastic compatible according to data sheet\u003c\/li\u003e\n\n\u003cli\u003ePrevents scratches due to mechanical ice scraping\u003c\/li\u003e\n\n\u003cli\u003eShortens departure preparation in the winter fleet\u003c\/li\u003e\n\n\u003cli\u003eReady to use, no dosing technology required\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eSpray the product undiluted onto the frozen window and allow to act briefly. As soon as the ice layer dissolves, remove the ice from the glass with a rubber lip or a rubber scraper. For very thick ice layers, repeat the process instead of mechanically scraping again. To avoid internally frozen or fogged windows, activate window heating and ventilation when de-icing. Liquid and vapour are highly flammable: do not use near ignition sources or open flames, ensure ventilation in enclosed halls. Avoid swallowing, avoid eye contact and rinse thoroughly with water in case of eye contact. Do not allow container to heat up in the passenger compartment.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Spray undiluted onto the frozen window.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eDepending on the ice thickness, about 30 to 60 ml per windscreen are needed. A 500 ml spray container is therefore sufficient for about 10 to 15 de-icings, a 10-litre canister for refilling for about 200 to 300 applications.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eFront, side and rear windows of cars, vans, trucks and buses, driver's cabs of construction and municipal vehicles, fleet parking spaces without halls, company yards and winter service bases.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eAccording to the data sheet, glass, paint, rubber and plastic compatible, so it can also be used in the area of window seals and decorative strips. Avoid contact with ignition sources. For delicate films, tinted windows and plastic covers, test beforehand in a hidden area.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H225 Highly flammable liquid and vapour; H226 Flammable liquid and vapour; H302 Harmful if swallowed; H319 Causes serious eye irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking; P233 Keep container tightly closed; P240; P262; P305; P338; P351; P403\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eWindscreen antifreeze -70° (Art. 534) is a dilutable wiper water concentrate for continuous operation in the tank, while the windscreen de-icer (Art. 535) is sprayed undiluted for spot de-icing. For pure windscreen cleaning without antifreeze, Cover Windscreen Clear (Art. 233) is suitable.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 250ml can","offer_id":58572412453248,"sku":"535-01","price":6.7,"currency_code":"EUR","in_stock":true},{"title":"12x 250ml Can","offer_id":58572412486016,"sku":"535-12","price":20.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-felgenstar-s-felgenreiniger","title":"Cover Rims Star S","description":"\u003cp\u003eCover-Felgenstar S is a powerful wheel cleaner for commercial use on heavily soiled wheels. The concentrate dissolves baked-on deposits, stubborn brake dust, and oil and grease-based grime without the need for manual brushing or scrubbing. This is precisely its operational benefit: the cleaning time per wheel is significantly reduced, and reconditioning can be timed for consistent quality even with high vehicle throughput. The product is infinitely miscible with water and biodegradable, allowing the concentration to be precisely adjusted from neat to 1:10 according to the degree of soiling. Cover-Felgenstar S was specifically developed for heavily soiled rims, positioning it above a maintenance cleaner. For fleets, car dealerships, and tire services, this means less manual labor, less consumable material, and a reproducible appearance of reconditioned wheels. A separate bodywork product should be used for cleaning the exterior of the rest of the vehicle.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDissolves baked-on brake dust without mechanical brushing\u003c\/li\u003e\n\n\u003cli\u003eDoseable from neat to 1:10, infinitely miscible with water\u003c\/li\u003e\n\n\u003cli\u003eSpecially developed for heavily soiled wheels\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable\u003c\/li\u003e\n\n\u003cli\u003eShort reaction time of around three minutes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003ePre-wet wheels. Spray Cover-Felgenstar S, diluted from neat to 1:10 depending on the degree of soiling, or apply with a brush and allow to react for approx. 3 minutes. Then work with a high-pressure cleaner and rinse thoroughly with clear water. Do not spray on heated surfaces and do not allow to dry. Do not use on high-gloss polished or chrome-plated rims. Wear acid and chemical-resistant protective gloves and safety goggles.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eConcentrate. Dilute with water from neat to 1:10 depending on the degree of soiling. Reaction time approx. 3 minutes.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approximately 330 liters of application solution when diluted 1:10. At approximately 100 ml of solution per wheel, this is sufficient for approximately 3,000 wheel cleanings.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAluminum rims, painted and powder-coated rims, steel rims, hubcaps. Typical applications include fleets, car dealerships, tire service and tire retail businesses, car care centers, and used car dealerships.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for aluminum rims, painted and powder-coated rims, hubcaps, and steel rims. Not suitable for high-gloss polished or chrome-plated rims. Do not spray on heated surfaces.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 243 Cover Felgenstar is the standard wheel cleaner for normal soiling, Art. 244 Cover Felgenstar Lila uses a color indicator for visual control of the reaction. Art. 109 Covil Felgenstar Dry is the ready-to-use variant without mixing. Cover-Felgenstar S covers the area of heavily soiled wheels.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor commercial customers only. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L Bottle","offer_id":58572418253184,"sku":"707-0001","price":11.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572418285952,"sku":"707-0012","price":120.0,"currency_code":"EUR","in_stock":true},{"title":"10 L container","offer_id":58572418318720,"sku":"707-0010","price":83.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572418351488,"sku":"707-0030","price":231.0,"currency_code":"EUR","in_stock":true},{"title":"60 L container","offer_id":58572418384256,"sku":"707-0060","price":425.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-trennmittel-asphalt-anwendungsfertig","title":"COVIL RELEASE AGENT","description":"\u003cp\u003eCOVIL RELEASE AGENT is a ready-to-use asphalt release agent for asphalt tools, trucks, tippers, dumpers, and rollers. The product is readily biodegradable according to OECD 301c, completely biodegradable, low-odor, and wax- and silicone-free. The absence of silicone is operationally relevant because silicone residues on vehicle and tool surfaces can interfere with subsequent painting and coating work. Since the release agent is used undiluted, there is no need for mixing tanks, dosage errors, or daily checks of the mixing ratio. For road construction crews, this means short setup times before the start of a shift: clean the vehicle, wet it, ready for use. Application is possible by spray gun, brush, or roller, making it practical even where no wetting system is available. A prerequisite for reliable release action is thorough and complete wetting of clean, oil- and tar-free surfaces. The product is classified H304 and must be handled accordingly. The product is supplied in container sizes from 1-liter bottles to 60-liter canisters, allowing both individual vehicles and entire crews to be supplied economically.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eReady-to-use, no mixing or dosage errors\u003c\/li\u003e\n\n\u003cli\u003eReadily biodegradable according to OECD 301c\u003c\/li\u003e\n\n\u003cli\u003eWax- and silicone-free, uncritical for subsequent painting\u003c\/li\u003e\n\n\u003cli\u003eCan be applied by spray gun, brush, or roller\u003c\/li\u003e\n\n\u003cli\u003eLow odor when used on construction sites\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean equipment, dumpers, and tools before use; they must be free of oil and tar. Apply COVIL RELEASE AGENT undiluted to the surfaces of transport vehicles, asphalt buckets, pavers, rollers, and molds. Application is done by spraying, brushing, or rolling. Thorough and complete wetting is crucial; unwetted areas will lead to sticking. Before initial use on a new surface, test material compatibility. The product can be fatal if swallowed and enters airways (H304), so do not transfer to food containers, do not induce vomiting, and seek immediate medical advice if swallowed. Do not inhale spray mist, wear suitable protective gloves.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply undiluted by spraying, brushing, or rolling.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eDepending on the application method and dumper size, approximately 0.3 to 0.5 liters are needed for wetting a truck dumper. A 30-liter canister is sufficient for about 60 to 100 applications, and a 10-liter canister for about 20 to 33 applications.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eElevator buckets, transport equipment, truck beds and troughs, mastic asphalt buckets, rollers, road pavers, and asphalt tools and hand tools in blacktop construction.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for asphalt tools, trucks, tippers, dumpers, rollers, and pavers. Wax- and silicone-free, making it uncritical for subsequent painting work on treated vehicle parts. Material compatibility must be tested before application. Equipment must be free of oil and tar before application.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS08 Health hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H304 May be fatal if swallowed and enters airways.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 921 is the ready-to-use alternative to the concentrate COVIL-ASPHALT-TRENN-WM (Art. 920) and is worthwhile for smaller crews without a mixing station. Those who process stone mastic asphalt or silent asphalt will find the formulations developed for this purpose in ASPHALT-TRENNMITTEL NEU (Art. 926) or ASPHALT-TRENN SF (Art. 925).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572419629440,"sku":"921-0001","price":20.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572419662208,"sku":"921-0012","price":207.9,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572419694976,"sku":"921-0010","price":143.9,"currency_code":"EUR","in_stock":true},{"title":"30 L Canister","offer_id":58572419727744,"sku":"921-0030","price":419.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-konservierung-korrosionsschutz-metall","title":"COVIL PRESERVATION","description":"\u003cp\u003eCOVIL CONSERVATION is a fully synthetic surface protection based on multifunctional preservatives. The product protects metals from rust, saltwater, water, and other aggressive liquids, forming a touch-dry, non-tacky protective film. The crucial technical difference from thick-layer waxes lies in its low density of approximately 0.8: The product creeps into the finest cracks, folds, and overlaps, building corrosion protection precisely where road salt and moisture undermine conventional coatings. For municipal depots and fleet operators, this is particularly relevant for winter storage: snowplows and gritters, agricultural, construction, and forestry machinery measurably lose residual value due to salt corrosion, and the repair of corroded frames and attachments ties up workshop capacity. Since the film is not tacky, treated vehicles remain operable and attract less dust. Vehicles in a seawater climate can also be preserved with this product. The product is flammable and must be stored and processed accordingly.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCreeps into the finest cracks due to low density\u003c\/li\u003e\n\n\u003cli\u003eTouch-dry, non-tacky protective film\u003c\/li\u003e\n\n\u003cli\u003eProtection against saltwater and aggressive liquids\u003c\/li\u003e\n\n\u003cli\u003eFor winter storage of agricultural, construction, and forestry machinery\u003c\/li\u003e\n\n\u003cli\u003eDrying time at 20 degrees Celsius approximately 1.5 hours\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eRemove grease and oil from the surface before application; the substrate must be clean. Warm the product to approximately 20 degrees Celsius before processing and shake or stir well to ensure the ingredients are evenly distributed. Apply undiluted to the surfaces to be protected, using a brush, lambskin roller, pressure sprayer, or airless device. Processing temperature 5 to 30 degrees Celsius. For optimal protection, apply 2 to 3 coats. Drying time at 20 degrees Celsius approximately 1.5 hours; allow sufficient flash-off time between coats. The product is flammable (H226), may be fatal if swallowed and enters airways (H304), may cause respiratory irritation (H335), and may cause drowsiness or dizziness (H336). Process only in well-ventilated areas and away from ignition sources, do not breathe spray mist, wear protective gloves and eye protection. Multi Clean Alka (Art. 257B) is suitable for later removal of the protective film.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply undiluted, 2 to 3 coats for optimal protection. Warm to approximately 20 degrees Celsius and stir well before use.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eFor a double application, depending on the surface roughness, approximately 100 to 150 milliliters per square meter can be expected. A 10-liter container is therefore sufficient for approximately 70 to 100 square meters of treated area, which corresponds to about 3 to 6 snowplows or gritters, depending on the design.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003ePreservation of agricultural machinery, construction machinery, forestry machinery, and snowplows in the municipal sector, tractors, trucks, low loaders, gritters, as well as vehicles and superstructures used in seawater climates and thus exposed to saltwater.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eFor metals and steel structures susceptible to rust. Protects against saltwater, water, and other aggressive liquids. Creeps into the finest cracks due to its low density of approximately 0.8. Forms a touch-dry, non-tacky film. Clean greasy and oily substrates beforehand, as the film will not adhere otherwise.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H335 May cause respiratory irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P241 Use explosion-proof electrical equipment\/ventilating\/lighting.; P243; P261 Avoid breathing dust\/fume\/gas\/mist\/vapors\/spray.; P301; P310 Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal facility.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCOVIL CONSERVATION is a pure preservation product for service life and winter storage. The concrete release agent (Art. 924) and the plant oil-based organic release agent (Art. 309A) additionally combine corrosion protection with a release effect against asphalt and mortar adhesion. Multi Clean Alka (Art. 257B) is intended for removing the protective film.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L Bottle","offer_id":58572419760512,"sku":"922-0001","price":31.9,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572419793280,"sku":"922-0010","price":196.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572419826048,"sku":"922-0030","price":541.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"asphalt-trenn-sf-trennmittel-splittmastix","title":"ASPHALT RELEASE AGENT SF","description":"\u003cp\u003eASPHALT-TRENN SF is a water-miscible, fully synthetic asphalt release agent, specifically developed for stone mastic asphalt with polymer-modified bitumen and for open-pored asphalt. Due to their polymer content, these pavements are significantly more prone to adhesion than conventional mixtures, which is why standard release agents often fail too early in such cases. The product is odorless and readily biodegradable according to OECD 301 C. Crucially for practical application, it leaves no oily residues, ensuring load safety for asphalt containers and tippers, and leaving no residues on concrete and asphalt. The pavement is not dissolved, which avoids discussions about installation quality and warranty. For road construction companies, this reduces the manual effort for scraping out containers and tools and thus the downtime of vehicles between loads. The concentrate is frost-resistant in its delivery state and can therefore be stored easily even in the cold season.\u003c\/p\u003e\u003ch3\u003eYour benefits at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSpecially developed for stone mastic asphalt and open-pored asphalt\u003c\/li\u003e\n\n\u003cli\u003eNo oily residues, load safety remains ensured\u003c\/li\u003e\n\n\u003cli\u003eReadily biodegradable according to OECD 301 C\u003c\/li\u003e\n\n\u003cli\u003eConcentrate is frost-resistant in its delivery state\u003c\/li\u003e\n\n\u003cli\u003eOdorless and fully synthetic, without mineral oil base\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean equipment and facilities before application to ensure reliable separation. For first use, start with the recommended maximum concentration and then gradually dilute further as long as the release effect is maintained. Mix exclusively with water, never dilute with diesel. Use only clean containers for mixing and ensure thorough mixing. Dilutions: polymer-modified bitumen neat or 1:1 with water, porous asphalt neat, conventional binder courses and asphalts neat up to 1:3 diluted depending on the application. Wet containers, tippers, tools, and plant parts evenly and completely. When processing polymer-modified bitumen, do not use rollers with rubber wheels, as adhesion cannot be avoided there and the bitumen surface is excessively kneaded. The concentrate is frost-resistant in its delivery state; prepared dilutions must be protected from frost.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eConcentrate. Polymer-modified bitumen neat or diluted 1:1 with water, porous asphalt neat, conventional binder courses and asphalts neat up to 1:3 diluted depending on the application. Dilute exclusively with water, never with diesel.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approximately 120 liters of application solution when diluted 1:3, and approximately 60 liters when diluted 1:1. For neat application with porous asphalt, no dilution is needed; in this case, the container content directly corresponds to the amount used.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eStone mastic asphalt with polymer-modified bitumen, open-pored asphalt (porous asphalt), conventional binder courses and asphalts, asphalt mixing plants, asphalt containers, tippers, and tools in road and pavement construction.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eLeaves no residues on concrete and asphalt and does not dissolve asphalt. No oily residues, thus ensuring load safety for asphalt containers and tippers. Do not dilute with diesel. Do not use rollers with rubber wheels for polymer-modified bitumen.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eASPHALT-TRENN SF is used highly concentrated to neat for polymer-modified bitumen and porous asphalt, making it the more robust setting. ASPHALT-TRENNMITTEL NEU (Art. 926) and ASPHALT-TRENNMITTEL SF (Art. 927) can be further diluted for the same range of applications. Unlike Art. 927, Art. 925 is frost-resistant in its delivery state.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572419989888,"sku":"925-0001","price":22.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572420022656,"sku":"925-0012","price":217.9,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572420055424,"sku":"925-0010","price":157.9,"currency_code":"EUR","in_stock":true},{"title":"30 L canisters","offer_id":58572420088192,"sku":"925-0030","price":438.9,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572420120960,"sku":"925-0060","price":764.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"schweiss-trennmittel-emulsion-schweissperlen","title":"Anti-spatter spray","description":"\u003cp\u003eThe weld release agent prevents welding spatter from sticking to tools and workpieces. It is suitable for gas metal arc welding and shielded metal arc welding, is silicone-free and wax-free, and non-flammable. Unlike solvent-based release sprays, the product is an aqueous emulsion without solvents, which means there is no additional solvent load in the welding booth and no increased fire load at the workplace. The silicone-free nature is crucial for downstream processes: silicone residues lead to crater formation during painting. With proper application, treated workpieces are suitable for subsequent painting. For locksmiths and metal construction companies, this means less rework due to grinding and chiseling off adhering beads, less wear on welding nozzles and fixtures, and shorter cycle times per assembly. The application is undiluted and very thin with a hand atomizer or comparable spray device. A ready-to-use product is delivered, which can be provided directly at the welding workstation without a mixing station. Before post-treatment by painting or hot-dip galvanizing, the manufacturer recommends a test and, if necessary, cleaning of the workpiece.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAqueous emulsion without solvents, non-flammable\u003c\/li\u003e\n\n\u003cli\u003eSilicone-free and wax-free, paint-friendly with proper application\u003c\/li\u003e\n\n\u003cli\u003ePrevents welding beads from sticking to fixtures\u003c\/li\u003e\n\n\u003cli\u003eSuitable for gas metal arc welding and shielded metal arc welding\u003c\/li\u003e\n\n\u003cli\u003eUndiluted application with a hand atomizer, no mixing\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eFirst, clean workpieces of residues. Use the release agent undiluted and spray it on very thinly and evenly. Excessive application should be avoided to prevent pore formation in the weld metal and hydrogen-induced cracks in sensitive steels under critical stress. The agent must not get into the weld seam. Apply with a spray device, such as a hand atomizer. After spraying cold welding nozzles, remove any dripping. Shake vigorously before use. Before post-treatment of workpieces by painting or hot-dip galvanizing, a test and, if necessary, cleaning are recommended. Do not inhale spray mist and only process in well-ventilated areas; use existing extraction at the welding workstation.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady-to-use, do not dilute. Spray on very thinly and evenly, undiluted. Shake vigorously before use.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDue to the prescribed very thin application, about 15 to 25 milliliters per square meter of treated area should be applied. A 10-liter canister is thus theoretically sufficient for several hundred square meters of workpiece surface or for a large number of fixtures and welding nozzles in shift operation.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eWelding fixtures, clamping devices, clamping plates, welding nozzles and gas nozzles, workpieces and assemblies in gas metal arc welding and shielded metal arc welding, welding tables and supports in locksmiths, metal construction, and production lines.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eAqueous emulsion without solvents, silicone-free and wax-free, non-flammable. With proper application, treated workpieces are suitable for subsequent painting. Do not let it get into the weld seam. Before hot-dip galvanizing or painting, perform a test and, if necessary, cleaning. Apply particularly thinly to sensitive steels under critical stress.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eItem 993 is the aqueous, non-flammable variant in the Coverax range and complements the weld release agent (Item 315). For release and lubrication tasks outside of welding technology, Trennax-MS with silicone (Item 110) and the silicone-free Trennax OS (Item 111) are available.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572421497216,"sku":"993-0001","price":29.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572421529984,"sku":"993-0010","price":190.5,"currency_code":"EUR","in_stock":true},{"title":"30 L jerrycan","offer_id":58572421562752,"sku":"993-0030","price":501.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"multi-clean-alka-alkalischer-kraftreiniger","title":"Multi Clean Alka","description":"\u003cp\u003eMulti Clean Alka is a highly effective alkaline power cleaner for heavily soiled machines, vehicles, and components. The product dissolves stubborn, encrusted deposits such as resin and soot, all types of animal oils and fats, environmental deposits, and combustion and sugar residues. The economic advantage lies in its high dilutability: from a minimum dilution of 1:5, the concentration can be adjusted to the degree of soiling, so that light maintenance cleaning and basic cleaning are covered with the same container. This reduces the number of cleaners to be stocked and simplifies hazardous substance management and instruction. Multi Clean Alka can be used with all common cleaning machines and devices and is particularly suitable as an additive in high-pressure cleaners, which shortens soaking and brushing times. The product is used in industry and trade, in the food industry, and for heavily soiled facades. Before use on aluminum, a compatibility test is required.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDilutable at least 1:5, making it very economical\u003c\/li\u003e\n\n\u003cli\u003eDissolves resin, soot, animal oils and fats\u003c\/li\u003e\n\n\u003cli\u003eProven additive in high-pressure cleaners\u003c\/li\u003e\n\n\u003cli\u003eCovers maintenance and basic cleaning with one container\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for heavily soiled facades\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eMulti Clean Alka must be applied diluted at least 1:5 with water; stronger dilutions are possible and economically sensible for less heavy soiling. Apply the working mixture to the surface to be cleaned with a cleaning machine, spray device, or as an additive in a high-pressure cleaner. Allow to act sufficiently, but do not let it dry. Remove the dissolved dirt with a brush or sponge and then rinse thoroughly with clear water. For heavily encrusted deposits, repeat the treatment instead of uncontrollably increasing the concentration. Before use on aluminum, carry out a compatibility test in an inconspicuous area, and also check material compatibility on unknown substrates. As an alkaline concentrate, protective gloves and safety goggles must be worn when preparing the solution; always add the concentrate to water and not vice versa.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eConcentrate. Dilute at least 1:5 with water; for lighter soiling, dilute proportionally higher. Suitable as an additive in high-pressure cleaners and for all common cleaning machines.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 33 kg container yields approximately 200 liters of application solution at the minimum dilution of 1:5 and about 690 liters at 1:20. An 11 kg container yields approximately 66 liters at 1:5, and a 66 kg container yields approximately 1,380 liters of application solution at 1:20.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eHeavily soiled machines and equipment in industry and trade, forklifts, excavators, rollers, low loaders, construction trucks, tractors and trailers, refuse vehicles and sludge suction vehicles, engines, metal and plastic constructions, applications in the food industry, and heavily soiled facades.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor metal and plastic constructions, machines, vehicles, and facade surfaces. Before use on aluminum, a compatibility test must be carried out. Before each application on unknown substrates, check material compatibility. Always rinse with clear water after cleaning.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eMulti Clean Alka (Art. 257B) is the reinforced variant of the alkaline all-purpose concentrate Covil Multi Clean (Art. 257) and targets encrusted, stubborn deposits. Alka-Clean Cover 75 (Art. 245) covers comparable tasks in surface cleaning. Additionally, Art. 257B is the recommended agent for removing the wax film of COVIL KONSERVIERUNG (Art. 922).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 kg Flasche","offer_id":58830259880320,"sku":"257B-0001","price":19.5,"currency_code":"EUR","in_stock":true},{"title":"11 kg canister","offer_id":58572421759360,"sku":"257B-0011","price":159.5,"currency_code":"EUR","in_stock":true},{"title":"33 kg canister","offer_id":58572421792128,"sku":"257B-0033","price":442.9,"currency_code":"EUR","in_stock":true},{"title":"66 kg canister","offer_id":58572421824896,"sku":"257B-0066","price":815.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-257b-multi-clean-alka-ultra-starker-kraftreiniger-produktbild.webp?v=1788189256"},{"product_id":"trennax-ms-trennmittel-silikon-antistatisch","title":"Trennax-MS","description":"\u003cp\u003eTrennax-MS is a silicone-containing release and lubricant for the plastics, rubber, and textile processing industries. It combines high-quality release, lubricating, and conditioning properties with antistatic and anticorrosive effects. The ignition temperature is above 300 °C, which allows the product to be used safely in foundry and welding technology environments. Trennax-MS is physiologically harmless, skin-friendly, and non-toxic. The applied film enables drip-free and non-sticky lubrication of locks, wood and plastic mechanisms, and makes zippers and drawers permanently smooth. Important for work preparation: Due to the silicone content, subsequent painting or bonding of the treated surface is not possible – for this purpose, Trennax OS (Art. 111) is available.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRelease, lubrication, and conditioning effect in one product\u003c\/li\u003e\n\n\u003cli\u003eIgnition temperature over 300 °C – process-safe in welding technology\u003c\/li\u003e\n\n\u003cli\u003eAntistatic and anticorrosive\u003c\/li\u003e\n\n\u003cli\u003ePhysiologically harmless and skin-friendly\u003c\/li\u003e\n\n\u003cli\u003eDrip-free and non-sticky lubrication\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eSpray thinly onto cleaned surfaces from a distance of 30–50 cm. Hold the can upright. When used as a care product, polish afterwards to increase the shine.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Apply thinly – more application does not improve the release effect.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eOne 400 ml can is sufficient for approx. 15–20 m² of thinly treated mold surface.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003ePlastics, rubber, foam, and textile industry, foundry and welding technology, paper and printing industry, locksmiths, automotive workshops, furniture manufacturing, leather industry, tent factories, boat sector. Care of furniture, plastic surfaces, leather, tents, tarpaulins, blinds, awnings, locking systems.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for metal, plastic, leather, rubber, and wood. Attention: Contains silicone – treated surfaces can no longer be painted or bonded.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003eJF90-U0PR-W005-KDG1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eH220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; \u003cmeta charset=\"utf-8\"\u003eH280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P273 Avoid release to the environment.; P302+P352 IF ON SKIN: Wash with plenty of soap and water.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 111 Trennax OS is the silicone-free alternative if the treated surface needs to be painted, bonded or metallized after the release process. Art. 316 Trennax-MS open is the canister variant for dipping and spraying systems.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578112348544,"sku":"110-01","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822493012352,"sku":"110-06","price":91.9,"currency_code":"EUR","in_stock":true},{"title":"12 x 400ml can","offer_id":58578112381312,"sku":"110-12","price":163.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822493045120,"sku":"110-24","price":303.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-trennax-ms-trenn-gleitmittel-mit-silikon-01-produktbild.png?v=1785364246"},{"product_id":"cover-ptfe-spray-trockenschmierung-gleitmittel","title":"Cover PTFE Spray","description":"\u003cp\u003eCover PTFE Spray is a dry, grease-free release agent, lubricant, and dry film coating for all applications where oil- and grease-containing lubricants are undesirable. Because the PTFE film is non-tacky, it does not attract dust, chips, or dirt – a decisive advantage for guides, conveyor belts, and in dusty production environments where grease lubrication turns into grinding paste. The film is water, dust, and dirt repellent and resistant in a temperature range of -180 °C to +240 °C, as well as to many chemicals, water, and oils. Cover PTFE Spray is therefore the standard release agent in the optical and precision mechanics industries as well as in plastics processing when cleanliness is a process requirement.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDry PTFE film – does not bind dust or chips\u003c\/li\u003e\n\n\u003cli\u003eTemperature resistant from -180 °C to +240 °C\u003c\/li\u003e\n\n\u003cli\u003eResistant to many chemicals, water, and oils\u003c\/li\u003e\n\n\u003cli\u003eWater, dust, and dirt repellent\u003c\/li\u003e\n\n\u003cli\u003eRemovable without residue with Cover-BR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eShake can vigorously before use until the mixing ball moves freely. Spray thinly and evenly from a distance of approx. 20 cm. Allow to flash off until the dry film has formed. The active ingredient can be removed with a suitable solvent, e.g., Cover-BR (Art. 104).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. A thin dry film is sufficient.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 12–18 m² of sliding surface.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eGuides, slide rails, conveyor belts, chains, plastic bearings, cutting tools, drawers, furniture hinges, castors, door hinges. Release agent in plastics processing as well as the optical and precision mechanics industries. Water-resistant coating for paper, wood, and cork.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for metal, plastic, wood, paper, and cork. Dry film – does not attract dust.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H229 Pressurized container: May burst if heated.; H280; H315 Causes skin irritation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P403\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 515 Cover-PTFE is the canister version for dip and spray systems. Art. 111 Trennax OS is the silicone-free release agent for welding technology, Art. 126 Chain and Cable Spray is the adhesive lubricant for heavily loaded chains.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578113102208,"sku":"119-01","price":19.3,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822219956608,"sku":"119-06","price":114.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578113134976,"sku":"119-12","price":200.4,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822219989376,"sku":"119-24","price":390.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-mf40-multifunktionsspray-kriechoel","title":"Cover MF40","description":"\u003cp\u003eCover MF40 is a multifunctional spray that lubricates, maintains, cleans, and protects, thereby replacing several individual products on the workshop shelf. It loosens seized screws, hinges, and metal connections, removes grease, tar, oil, and adhesive residues, and at the same time provides long-lasting lubrication. The product displaces moisture, has an antistatic effect, and leaves a wafer-thin protective film that protects against corrosion and oxidation. Since the film remains almost invisible and stain-free, the spray can also be used on sensitive surfaces and precision devices where greasy sprays would leave disturbing residues. For maintenance and workshops, this means shorter setup times for dismantling work, less breakage of seized connections, and a reduced variety of articles in stock. The aerosol is marked with the signal word Danger and is classified, among other things, as an extremely flammable aerosol; the container is under pressure and may burst if heated.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFour functions in one can: loosen, lubricate, clean, protect\u003c\/li\u003e\n\n\u003cli\u003eDisplaces moisture and has an antistatic effect\u003c\/li\u003e\n\n\u003cli\u003eWafer-thin protective film, almost invisible and stain-free\u003c\/li\u003e\n\n\u003cli\u003eRemoves grease, tar, oil, and adhesive residues\u003c\/li\u003e\n\n\u003cli\u003eReduces the variety of articles in workshop inventory\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eShake the can before use and spray specifically from about 20 centimeters away onto the connection, bearing, or area to be cleaned. For seized screws and hinges, let it soak in for a few minutes so that the product can creep into the gap, then loosen and repeat the process if necessary. To remove grease, tar, oil, and adhesive residues, spray on, let it act briefly, and wipe off with a cloth. For moisture displacement and as corrosion protection, apply thinly and evenly; wiping is not necessary. Do not spray on live parts and disconnect systems before treatment. Use only in well-ventilated areas and away from ignition sources; do not smoke. Container is under pressure, protect from direct sunlight and temperatures above 50 degrees Celsius, and do not open forcefully or incinerate. Before use on plastics and paints, conduct a compatibility test.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eWith short, targeted sprays of about one second, around 200 individual applications are realistic per can. A container with 12 cans thus covers the ongoing needs of a medium-sized workshop or maintenance department for several months.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eSeized screws, nuts, bolts, and hinges, joints, linkages, and guides, electrical contacts and plug connections for moisture displacement, tools and bare metal parts as corrosion protection, removal of grease, tar, oil, and adhesive residues on machines, precision devices, and sensitive surfaces.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFor metals, fasteners, bearings, joints, and electrical contacts. Leaves an almost invisible, stain-free protective film and can therefore also be used on sensitive surfaces and precision devices. Before use on painted surfaces, plastics, and elastomers, conduct a compatibility test.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578114380160,"sku":"102002-01","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822208651648,"sku":"10202-06","price":53.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578114412928,"sku":"102002-12","price":85.2,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822208684416,"sku":"10202-24","price":162.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-window-glasreiniger-haftschaum","title":"Cover Window","description":"\u003cp\u003eCover-Window is a self-adhesive, super-adhesive foam for waterless glass and vehicle cleaning. The foam remains on vertical windows without running off, allowing it to fully dissolve environmental deposits, oils, greases, silicone, rubber abrasion, as well as flies and insects from painted surfaces, windows, Plexiglas, and glass with full contact time. Stainless steel, rubber, plastic, tiles, painted surfaces, and Resopal are not affected. The product leaves no streaks and requires no water connection – a clear advantage for mobile vehicle detailing, fleet services, and property cleaning. For fleet operators, waterless application also significantly simplifies wastewater and site requirements.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAdhesive foam stays on vertical windows – full contact time\u003c\/li\u003e\n\n\u003cli\u003eCleans completely without water connection\u003c\/li\u003e\n\n\u003cli\u003eLeaves no streaks, no smears\u003c\/li\u003e\n\n\u003cli\u003eApproved for polycarbonate and Plexiglas panes\u003c\/li\u003e\n\n\u003cli\u003eRemoves insects, silicone, and rubber abrasion in one go\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eShake can before use, spray evenly onto the surface, let it work for approx. 30 seconds, then wipe off with a damp, clean cloth or paper towel. If necessary, polish with a dry cloth.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady-to-use. Approx. 30–40 ml foam per m².\u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eOne 400 ml can is sufficient for approx. 10–13 m² or the interior and window cleaning of 4–6 cars.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eCar windows, tiles, mirrors, marble, car upholstery and carpets, dashboards, plastic and door trims, vehicle interior cleaning, cockpit, car headliners with nicotine deposits, exhaust area, radiator grille, helmet visors, leather clothing, helicopter windows, polycarbonate windows.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eDoes not attack stainless steel, rubber, plastic, glass, tiles, painted surfaces, and Resopal. Approved for polycarbonate.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eH220 Extremely flammable gas.; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; \u003cmeta charset=\"utf-8\"\u003eH280 Contains gas under pressure; may explode if heated.; H314 Causes severe skin burns and eye damage.; H315 Causes skin irritation.; H317 May cause an allergic skin reaction.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eEUH018 In use may form flammable\/explosive vapor-air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eArt. 107 Zitro-Fix is the more broadly applicable universal foam, while Cover-Window is the specialized solution for glass and vehicle surfaces. For high consumption, Art. 233 Cover Scheibenklar as a concentrate is more economical.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58587211137408,"sku":"108-01","price":9.99,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822060507520,"sku":"108-06","price":65.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58587211170176,"sku":"108-12","price":117.9,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822060540288,"sku":"108-24","price":219.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-window-haftschaumreiniger-glasreiniger-01-produktbild.png?v=1785416380"},{"product_id":"covil-felgenstar-dry-felgenreiniger-haftschaum","title":"Covil Rim Star Dry","description":"\u003cp\u003eCovil Felgenstar Dry is a self-adhesive cleaning foam that reconditions rims without the need for a water connection. The foam adheres to the rim, penetrates brake dust, environmental deposits, oils, greases, silicone, and rubber abrasion, and largely dissolves them automatically – on aluminum rims, painted and high-gloss polished rims, chrome rims, and steel rims alike. The product is biodegradable, physiologically harmless, skin- and environmentally friendly, and does not attack stainless steel, rubber, plastic, glass, or painted surfaces. This makes it suitable for mobile vehicle detailing, showrooms, and locations without wash bay permits, where classic acidic wheel cleaners are not an option.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eRim cleaning completely without water and wash bay\u003c\/li\u003e\n\n\u003cli\u003eAcid-free – also for polished and chrome rims\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable and physiologically harmless\u003c\/li\u003e\n\n\u003cli\u003eAdhesive foam with full contact time on vertical surfaces\u003c\/li\u003e\n\n\u003cli\u003eIdeal for mobile detailing and showrooms\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eShake can before use, spray foam evenly onto the rim, allow to act for approx. 30 seconds, wipe off with a damp, clean cloth or paper towel. If necessary, polish with a dry cloth.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Approx. 50–70 ml per wheel set.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 400 ml can is sufficient for approx. 6–8 wheels or 1.5–2 vehicles.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eAluminum rims, painted rims, high-gloss polished rims, chrome rims, steel rims. Additionally for mirrors, mirror caps, grilles and combustion residues in the exhaust area.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eDoes not attack stainless steel, rubber, plastic, glass, tiles and painted surfaces. Acid-free – also suitable for sensitive polished rims.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 243 Cover Felgenstar and Art. 244 Felgenstar Lila are the canister concentrates for car washes and high throughput. Felgenstar Dry is the waterless aerosol variant for mobile use.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58808915394944,"sku":"109-01","price":11.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58808915427712,"sku":"109-12","price":120.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-covil-felgenstar-dry-felgenreiniger-ohne-wasser-01-produktbild.png?v=1788038964"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/collections\/KFZ.jpg?v=1785177138","url":"https:\/\/coverax.de\/en\/collections\/fahrzeugpflege-werkstatt.oembed","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}