{"title":"Landscaping \u0026 Garden Design","description":"\u003cp\u003etext for outdoor facilities to be written\u003c\/p\u003e","products":[{"product_id":"marder-schreck-marderschutz-duftstoff-fahrzeug","title":"Marten Deterrent","description":"\u003cp\u003eMarder Schreck protects vehicles with special scents from martens biting through cables, hoses, and insulation material. The product does not kill or injure the animals but uses their sensitive sense of smell: The engine compartment becomes unattractive to the marten, and it avoids the vehicle. For fleet operators, this is the most economical prevention against a type of damage that can quickly reach four figures per incident and leads to unplanned vehicle downtime. Marder Schreck is harmless to all materials used in the engine compartment, such as plastic, rubber, aluminum, brass, and metal. One treatment lasts approximately three to four months.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eAnimal welfare compliant – deters without harming\u003c\/li\u003e\n\n\u003cli\u003eEffect lasts approx. 3–4 months\u003c\/li\u003e\n\n\u003cli\u003eMaterial-compatible with all engine compartment materials\u003c\/li\u003e\n\n\u003cli\u003ePrevents expensive cable and insulation damage\u003c\/li\u003e\n\n\u003cli\u003eQuick to apply without disassembly\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eEngine should be clean and free of oil. Spray the entire engine compartment with the aerosol can. For rubber antennas, spray the product onto a paper towel and wipe the antenna with it. Effect lasts approx. 3–4 months; reapply after every engine wash.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use. Spray the entire engine compartment evenly.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 4–6 engine compartment treatments.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eAll vehicle engines and rubber antennas. Haulage companies, taxi companies, company fleets, municipal vehicle fleets, permanent outdoor parkers.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eHarmless to plastic, rubber, aluminum, brass, and metal in the engine compartment. Do not spray on hot engine parts.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard warnings\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas cylinder, GHS07 Exclamation mark, GHS08 Health hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280; H304 May be fatal if swallowed and enters airways.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH phrases:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 113 E-Protect also offers some marten repellent as a side effect, but is primarily moisture protection. Marder Schreck is the specialized repellent with a significantly longer lasting effect.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml Can","offer_id":58572387058048,"sku":"136-01","price":15.5,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58822915719552,"sku":"136-06","price":92.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58572387090816,"sku":"136-12","price":160.8,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58822915752320,"sku":"136-24","price":310.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-oel-ex-oelzieher-steinreiniger","title":"Covil Oil-Ex Spray","description":"\u003cp\u003eCovil Öl-Ex Spray removes stubborn grease, oil, and wax stains from absorbent and non-absorbent surfaces. The product acts as an oil extractor: it penetrates deep into the substrate, binds the oil stain, and, as it dries, transports it back to the surface as a brushable crust – scrubbing or brushing during the exposure time is completely eliminated. The gel aerosol form offers clear practical advantages over liquid and powdered oil removers: it doesn't run, can be used even in windy conditions, allows for precise application, and works on vertical and sloping surfaces. The product is free of acids and alkalis and does not attack stone surfaces.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtracts oil from deep within instead of just spreading it\u003c\/li\u003e\n\n\u003cli\u003eNo scrubbing or brushing during the exposure time\u003c\/li\u003e\n\n\u003cli\u003eGel form doesn't run – can also be applied vertically\u003c\/li\u003e\n\n\u003cli\u003eCan be used even in windy conditions (unlike powder)\u003c\/li\u003e\n\n\u003cli\u003eFree of acids and alkalis, gentle on stone\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eShake can before use. Spray onto the dry surface from a distance of 20–30 cm in a vertical position. Allow to dry completely, then brush off or vacuum up the formed crust and dispose of it properly. Exposure time depends on ambient temperature and degree of contamination. Oleophobic impregnation is recommended afterwards.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray to cover the stain, including the edge area.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\n\u003cp\u003eOne 400 ml can treats approx. 1.5–2.5 m² of stained area.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eConcrete, clinker, asphalt, ceramic tiles, natural stone, terracotta. Garages and underground car parks, petrol stations, workshop floors, pavements, car parks, driveways, entrance stairs, terraces, grease stains in kitchen areas.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFree of acids and alkalis, does not attack stone surfaces. Test beforehand on polished natural stones. Do not spray into flames or onto incandescent objects.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 500ml Can","offer_id":58572387320192,"sku":"149-01","price":25.9,"currency_code":"EUR","in_stock":true},{"title":"12x 500ml Can","offer_id":58572387352960,"sku":"149-12","price":250.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-handrein-3-handwaschpaste-holzmehl","title":"Cover Hand Cleaner 3","description":"\u003cp\u003eCover Handrein 3 is a sand-free, wood flour-based hand cleaning paste that gently removes stubborn dirt such as grease, grime, oil, Molykote, paint, varnish, tar, resin, ink paste, stamp ink, and printing ink from hands. The sand-free aspect is the crucial point: mineral abrasives act like sandpaper on the skin over time and cause precisely the micro-injuries through which industrial substances can penetrate. Wood flour cleans actively in pores and grooves without destroying the skin barrier. The product also has a disinfectant effect, a pleasant fresh scent, and complies with the requirements of the German Social Accident Insurance Institution for the Machine Building and Metal Working Industries (Maschinenbau-Berufsgenossenschaft). Its biodegradability significantly exceeds legal requirements.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSand-free – no micro-injuries to the skin\u003c\/li\u003e\n\n\u003cli\u003eAbrasives made from wood flour, biodegradable\u003c\/li\u003e\n\n\u003cli\u003eRemoves tar, resin, varnish, and printing ink\u003c\/li\u003e\n\n\u003cli\u003eAdditional disinfecting effect\u003c\/li\u003e\n\n\u003cli\u003eComplies with the conditions of the Maschinenbau-BG\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eRub a cherry-sized amount into wet hands with usual washing motions and wash hands thoroughly. Rinse off dissolved dirt with clear water. Afterwards, apply skin care (Art. 171 COVIL Cream).\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eUndiluted. Cherry-sized amount per wash (approx. 4–5 ml).\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eA 10-liter container is sufficient for approx. 2,000–2,500 washes.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eAll industrial and craft businesses with contact to oil, Molykote, paint, varnish, tar, resin, ink paste, stamp ink, and printing ink. Also suitable for gardening.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003epH 7, skin application. Sand-free, wood flour-based. Complies with the conditions of the Maschinenbau-Berufsgenossenschaft.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS05 Corrosion, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H302 Harmful if swallowed.; H315 Causes skin irritation.; H318 Causes serious eye damage.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 225 HANDREIN BIO also uses biological abrasives but is milder in dosage. Art. 226 HANDREIN Dry works without water. Art. 222 Hand Wash Cream is the mild variant without abrasives.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eFor sale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572393185664,"sku":"277-0010","price":93.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"insektenvernichter-wasserfrei-langzeitwirkung","title":"Insect killer","description":"\u003cp\u003eThe insect killer is a ready-to-use, water-free insecticide with immediate and long-term effects. It combats cold-blooded creatures and works via a flushing effect: pests that retreat into cracks and crevices are driven out of hiding and thus eliminated. This is the essential difference to pure contact agents, which only affect animals visibly present on the surface. It eliminates flying and crawling insects such as mosquitoes, cockroaches, ants, silverfish, moths, wasps, as well as bed bugs and mites. Due to its water-free formula, the product can also be applied as a surface coating, for example under cabinets and appliances, where it remains effective for longer. The pH value is 7. The product is classified as a hazardous substance (signal word Attention, including H226, H302, H304, H312) and should only be used in well-ventilated rooms and away from ignition sources.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eFlushing effect eliminates pests in cracks and crevices\u003c\/li\u003e\n\n\u003cli\u003eImmediate and long-term effect in one product\u003c\/li\u003e\n\n\u003cli\u003eWater-free, can be used as a surface coating under furniture\u003c\/li\u003e\n\n\u003cli\u003eEffective against flying and crawling insects\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eThe insect killer is used undiluted and can be atomized with any simple spray device. For flying insects, fog the product in the room. For crawling insects and their breeding grounds, spray directly or create a surface coating, for example under cabinets and appliances; the surface coating must be renewed after each cleaning. Use only in well-ventilated rooms and away from ignition sources such as sparks, flames, and embers. Do not inhale spray mist, do not spray directly on people or pets. Remove chicks, ornamental birds, and their cages from the room beforehand. Keep away from food, beverages, and animal feed and store out of reach of children. Use biocides carefully. Always read the label and product information before use.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady-to-use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eFor a surface coating, approximately 50 ml per m² is required; one liter is therefore sufficient for about 20 m² of coated area. When fogging against flying insects, consumption is significantly lower. Practical guidelines, the data sheet does not specify consumption.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eHotels, nursing homes, animal shelters, bakeries, kitchens, bathrooms, storage rooms, libraries, mills, agricultural establishments, and campsites, in each case for controlling flying and crawling insect pests including bed bugs and mites.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eDo not spray furniture, plastic objects, and painted surfaces. Keep away from food, beverages, and animal feed. Cover adjacent sensitive surfaces before treatment.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH Value (Concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H302 Harmful if swallowed.; H304 May be fatal if swallowed and enters airways.; H312 Harmful in contact with skin.; H317 May cause an allergic skin reaction.; H332 Harmful if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P233 Keep container tightly closed.; P240; P241 Use explosion-proof electrical equipment\/ventilation\/lighting.; P261 Avoid breathing dust\/fume\/gas\/mist\/vapors\/spray.; P272; P314\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe insect killer is designed for surface and room treatment in containers. For targeted applications, the aerosols Insekt-Ex 250 ml (Art. 115) and Cover Insekt-Ex (Art. 357) are available, Marder Schreck (Art. 136) is a repellent and not an insecticide.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 piece","offer_id":58572395381120,"sku":"303-01","price":16.7,"currency_code":"EUR","in_stock":true}]},{"product_id":"holz-oel-holzschutz-naturholz-aussen","title":"Wood Oil","description":"\u003cp\u003eWood oil is a specialized chemical-technical product for refreshing weathered wood indoors and outdoors. It penetrates unvarnished wood surfaces, restores the original natural color to grayed surfaces, and simultaneously creates a protective film against weathering. According to the data sheet, traces of weathering, small scratches, water stains, and dull spots disappear quickly, giving the treated wood an almost new appearance. The technical difference from pure wood cleaners is that wood oil does not remove material but rather replenishes and preserves it: the surface is nourished instead of sanded down. For businesses, this means that doors, door frames, fences, garden furniture, carports, and balcony cladding can be maintained without extensive sanding or painting. The application is thin and can be done with a cloth, brush, or spray method, so even larger areas can be treated in a manageable amount of time. Since the product is supplied ready for use, mixing and dosage control are eliminated, and maintenance intervals can be planned into ongoing property management.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eRestores grayed wood to an almost new appearance\u003c\/li\u003e\n\n\u003cli\u003eRefreshment and weather protection in one step\u003c\/li\u003e\n\n\u003cli\u003eApplication with cloth, brush, or spray method\u003c\/li\u003e\n\n\u003cli\u003eReady to use, no mixing or dosage control\u003c\/li\u003e\n\n\u003cli\u003eCan be used for both indoor and outdoor wood\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eClean the substrate before treatment and let it dry completely; de-gray heavily grayed areas beforehand. On smooth wood surfaces, apply wood oil evenly and thinly with a lint-free cloth, then gently polish if necessary. For outdoor use, application with a brush or spray method is also possible. For highly absorbent substrates, a second coat can be applied after the first drying. Remove excess material with a clean cloth or polish in\/out to prevent sticky spots. Allow oil-soaked cloths to dry spread out due to the risk of self-ignition or dispose of them safely. Before using on valuable items, create a test area.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eWith the thin application specified in the data sheet, approximately 8 to 12 m² per liter can be expected; a 10-liter container thus covers about 80 to 120 m². For highly absorbent wood and a second coat, the area is halved accordingly.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eNatural wood floors, doors and door frames, fences, garden furniture, carports, balcony and facade cladding, as well as other unvarnished wood components indoors and outdoors.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eApplicable to almost all unvarnished wood surfaces indoors and outdoors. Not intended for painted, sealed, or foil-coated surfaces, as the oil cannot penetrate there. Before treating sensitive or richly colored woods, create a test area.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eThe wood de-grayer (Art. 352) prepares heavily grayed surfaces before oil treatment, while wood oil then provides refreshment and protection. For mineral substrates such as natural stone or concrete, Stonefix (Art. 276) or Color Intensifier Nano (Art. 359) is intended instead of wood oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 liter bottle","offer_id":58572403212672,"sku":"353-0001","price":22.3,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L bottles","offer_id":58572403245440,"sku":"353-0012","price":224.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572403278208,"sku":"353-0010","price":155.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572403310976,"sku":"353-0030","price":432.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572403343744,"sku":"353-0060","price":795.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"drucksprueher-15-liter-spruehgeraet","title":"Pressure sprayer","description":"\u003cp\u003eThe pressure sprayer is a professional spray device for chemicals with a filling volume of 1.5 litres. It is designed for products with a pH value of 7 to 12, or alternatively for the acidic range of 2 to 7, thus covering the majority of commercial cleaning chemicals. With foaming products, the device produces extreme foam according to the data sheet. The foam strength is controlled by four inserts in the nozzle, which can be removed individually: from dry standing foam to wet spray application. The difference to simple hand spray bottles lies in the pump pressure container, which delivers a consistent spray over an entire filling, instead of diminishing with each pump. For businesses, this means consistent product application, lower consumption, and less fatigue during longer cleaning operations. The device works without compressed air or water connection and is therefore also suitable for outdoor use and changing objects.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eConsistent spray pattern over the entire filling\u003c\/li\u003e\n\n\u003cli\u003eFor products from pH 7 to 12 or pH 2 to 7\u003c\/li\u003e\n\n\u003cli\u003eFour nozzle inserts for adjustable foam strength\u003c\/li\u003e\n\n\u003cli\u003eWorks without compressed air and water connection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eFill the mixed cleaning solution into the 1.5-litre container and ensure that the pH value is within the permitted range. Close the container and build up pressure using the hand pump. For foaming products, adjust the foam strength using the inserts in the nozzle; for wetter application, remove individual inserts. Wet the surface evenly, observe the cleaner's reaction time and do not let it dry, then wipe or rinse off. After use, release residual pressure, rinse the device with clear water, and store it dry. Label the device permanently with the product used to avoid confusion. For cleaners with hazardous substance labelling, wear protective gloves and safety glasses.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eNot a dosing product. The cleaning solution is mixed according to the specifications of the concentrate used and filled into the 1.5-litre container.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eOne filling of 1.5 litres is sufficient for approximately 15 to 30 m² of surface, depending on the application amount.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eSanitary and kitchen areas, floor stains, machines and tools, vehicle bodies and rims, as well as targeted treatments with concentrates and ready-to-use solutions.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003ePlastic design with pump pressure container, suitable for products with a pH value of 7 to 12, or alternatively from 2 to 7. Not for solvent-containing products or chemicals outside this pH range. Rinse after each use to prevent damage to seals and nozzle.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003ePressure sprayer and foam poly sprayer both refer to the 1.5-litre device (Art. 401); the foam poly sprayer is configured for foaming application. For large areas with a compressed air network, the Foamer 24 L Stainless Steel (Art. 399) is intended.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 piece","offer_id":58572406423936,"sku":"401B-01","price":14.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"siloxan-w-290-steinimpraegnierung-hydrophob","title":"Siloxane W 290","description":"\u003cp\u003eSILOXAN W 290 is a solvent-based natural and artificial stone impregnating agent based on oligomeric siloxanes for hydrophobing mineral building materials. The product can be used on natural and artificial stone, concrete, aerated concrete, sand-lime brick, brickwork, unglazed pottery, fiber cement, mineral plasters, and mineral paint coatings. The decisive technical point is its function as an impregnation, not as a sealant: The capillaries are not sealed but narrowed. This prevents water molecules from penetrating the substrate, while smaller water vapor molecules continue to escape from the stone. The building component remains diffusion-open, preventing damage from trapped moisture. SILOXAN W 290 hydrolyzes under atmospheric humidity and condenses into a non-tacky polysiloxane with very high penetration depth, extremely high alkali resistance, and high aging resistance. For businesses, this means slower weathering, prevented efflorescence, less mold, algae, and moss formation, and longer cleaning intervals on facades. Application is done by spraying, brushing, or dipping in at least two wet-on-wet coats, as effective hydrophobization is only achieved with substrate-saturating application.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eVery high penetration depth with substrate-saturating application\u003c\/li\u003e\n\n\u003cli\u003eExtremely high alkali resistance and high aging resistance\u003c\/li\u003e\n\n\u003cli\u003eNon-tacky drying without optical change\u003c\/li\u003e\n\n\u003cli\u003eDiffusion-open, narrows capillaries instead of sealing them\u003c\/li\u003e\n\n\u003cli\u003eAlso applicable on damp, absorbent substrates\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eApply SILOXAN W 290 by spraying, brushing, or dipping. Application must be done in at least two coats, working very generously and evenly wet-on-wet. Effective hydrophobization is only achieved with substrate-saturating application. Consumption depends on the absorbency of the substrate and is empirically between 100 and 250 milliliters per square meter, and in extreme cases even more. Sufficiently dimensioned test areas provide information about quantity and effect, especially on differently absorbent substrates such as shell limestone. Application on damp but absorbent substrates is possible. The product is harmful if swallowed and in contact with skin, can be fatal if swallowed and enters airways, and causes skin irritation. Ensure good ventilation, keep away from ignition sources, and wear personal protective equipment.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply in at least two wet-on-wet coats until substrate saturation.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eConsumption varies between 100 and 250 milliliters per square meter, depending on absorbency. A 10-liter container thus covers approximately 40 to 100 square meters, a 30-liter container about 120 to 300 square meters. For highly absorbent substrates, the value can be significantly exceeded.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eNatural and artificial stone facades, exposed concrete and aerated concrete, sand-lime brick and brickwork, unglazed pottery, fiber cement panels, mineral plasters, and mineral paint coatings on buildings, monuments, retaining walls, and outdoor facilities.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for mineral, absorbent building materials of all kinds. Application on damp but absorbent substrates is possible. Do not use as a sealant and do not apply to non-absorbent or already densely coated substrates, as complete insulation by incorrect impregnation can destroy the substrate. Create a test area, especially for differently absorbent shell limestone.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H302 Harmful if swallowed.; H304 May be fatal if swallowed and enters airways.; H312 Harmful in contact with skin.; H315 Causes skin irritation.; H332 Harmful if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P301; P310 Immediately call a POISON CENTER\/doctor.; P330; P331\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eSILOXAN W 290 (Art. 650) is the solvent-based impregnating agent with high penetration depth for heavily stressed mineral substrates. Steinfix (Art. 276) covers stone impregnation in the standard range, Steinfestiger OH (Art. 696) is designed for solidifying crumbling substrates. Price and container information is not available; check information before publication.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572414157184,"sku":"650-0001","price":24.8,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572414189952,"sku":"650-0010","price":160.0,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572414222720,"sku":"650-0030","price":441.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"rost-ex-rostentferner-stein-beton","title":"Rust Remover","description":"\u003cp\u003eRost-Ex is a rust remover for stone and concrete that extracts rust stains from all types of stone such as concrete, granite, slate, marble, and shell limestone. Typical damage patterns include stains from vases, parasol stands, or metal furniture on patios and grave sites. Rust originating from inside the stone can also be treated. The practical difference from classic rust removers lies in the combination of active principle and control: The product extracts rust from the pore structure, instead of merely dissolving it superficially, and indicates when the reaction is complete through a violet discoloration. This allows the operation to be controlled without prior experience, and the treatment is repeated until the rust is no longer visible. The product contains a sulfur compound and smells accordingly, which is why work should only be carried out in well-ventilated areas.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtracts rust from the pore structure of stone and concrete\u003c\/li\u003e\n\n\u003cli\u003eViolet discoloration indicates the progress of the reaction\u003c\/li\u003e\n\n\u003cli\u003eAlso effective on rust from inside the stone\u003c\/li\u003e\n\n\u003cli\u003eCan be used on marble, granite, slate, and shell limestone\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eBefore use, test material compatibility. Apply Rost-Ex undiluted to the stains to be removed and allow it to act until the product turns violet; this discoloration serves as an indicator for the progress of the reaction. Then rinse with water and repeat the treatment until the rust is no longer visible. After the exposure time, rinse with plenty of water until the violet discoloration no longer appears. Use only in well-ventilated areas, as the product contains a sulfur compound and smells accordingly. Wear protective gloves and safety glasses, cover adjacent metal parts.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, apply undiluted and do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eSince it is only applied selectively to the rust stains, a 1-liter bottle is sufficient for numerous individual stains or approximately 3 to 5 m² of continuously treated area. Multiple repetitions increase consumption accordingly.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003ePatio slabs, yard areas, gravestones and grave sites, facade and wall surfaces made of concrete, granite, slate, marble, and shell limestone with rust stains.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor all types of stone such as concrete, granite, slate, marble, and shell limestone. Test material compatibility before use. Contains a sulfur compound, therefore use only in well-ventilated areas.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e no pictogram required\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P301; P305; P310 Immediately call a POISON CENTER\/doctor.; P331\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eENTRO (Art. 679) is the acid-based rust remover for metal parts such as chains, screws, and construction equipment, whereas Rost-Ex works on mineral substrates and removes rust discoloration in stone. For cement and lime film on acid-resistant stones, REINFIX (Art. 652) is intended.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L canister","offer_id":58572417892736,"sku":"699-0001","price":21.7,"currency_code":"EUR","in_stock":true}]},{"product_id":"rasenduenger-npk-bio-vital-mykorrhiza","title":"Lawn Fertiliser NPK Organic Vital","description":"\u003cp\u003eLawn Fertilizer NPK BIO Vital is an organic-mineral NPK fertilizer 6+3+6 based on a biologically activated humic acid generator. The carbon depot of charcoal from verifiably natural wood with over 80 percent carbon content serves as a storage for nutrients and microorganisms. The high buffering capacity of the charged carbons optimizes nutrient supply and improves the soil's water retention capacity. Added are plant and mineral substances, mycorrhiza, and selected microorganisms (Lactobacillus, Rhodopseudomonas, Saccharomyces) that promote root growth and stimulate plant vitality. Also included as secondary components are 2.0% CaO, 0.1% MgO, and 2.5% sulfur with 60% organic matter. The essential difference to mineral fast-acting fertilizers lies in the permanently stable humus formation that does not rot: the soil structure improves in the long term, instead of just providing nutrients for a short period. Can be used in soil and substrates, especially for flowering and fruiting plants.\u003c\/p\u003e\n\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCarbon depot stores nutrients and water\u003c\/li\u003e\n\n\u003cli\u003eMycorrhiza promotes root growth\u003c\/li\u003e\n\n\u003cli\u003eBalanced NPK 6+3+6 plus Ca, S and Mg\u003c\/li\u003e\n\n\u003cli\u003ePermanently stable humus formation without rotting\u003c\/li\u003e\n\n\u003cli\u003e60% organic matter, country of origin Germany\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct application\u003c\/h3\u003e\n\u003cp\u003eApply Lawn Fertilizer NPK BIO Vital evenly over the area; the application rate is 0.5 to 2.5 t\/ha, depending on the recommendation and soil condition. On lawns, water after application; in substrates, mix homogeneously. Please observe the detailed application description in the package insert; official advisory recommendations take precedence. Observe labeling: H302 harmful if swallowed, H317 may cause an allergic skin reaction, H318 causes serious eye damage, H335 may cause respiratory irritation. Wear safety goggles, protective gloves, and respiratory protection if dust develops; do not inhale dust.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady-to-use granules, do not dilute. Application rate 0.5 to 2.5 t\/ha depending on recommendation and soil condition.\u003c\/p\u003e\n\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\n\u003cp\u003e0.5 to 2.5 t\/ha corresponds to approximately 50 to 250 g\/m². A 20-kg bag is sufficient for approximately 80 to 400 m², and a 500-kg container for approximately 2,000 to 10,000 m².\u003c\/p\u003e\n\u003ch3\u003eAreas of application\u003c\/h3\u003e\n\u003cp\u003eLawns and green areas, soil and cultivation substrates in horticulture and agriculture, especially for flowering and fruiting plants. For vitalizing plant stands and for preparing and enriching cultivation substrates. Available in 20 kg, 500 kg, and 1,000 kg.\u003c\/p\u003e\n\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\n\u003cp\u003eOrganic-mineral fertilizer for soil and substrates. No material compatibility with components needs to be considered. Clean spreading equipment after use to prevent corrosion due to salt components. Store in a dry place.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eno signal word\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS05 Corrosive, GHS07 Exclamation mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-statements:\u003c\/strong\u003e H302 Harmful if swallowed.; H317 May cause an allergic skin reaction.; H318 Causes serious eye damage.; H335 May cause respiratory irritation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH statements:\u003c\/strong\u003e EUH208 Contains sensitizing agents. May cause allergic reactions.; EUH210 Safety data sheet available on request.; EUH401\u003c\/p\u003e\n\u003ch3\u003eProduct comparison\u003c\/h3\u003e\n\u003cp\u003eArticle 904 Lawn fertilizer with UKV combines fertilization with chemical weed control and is the choice for weedy lawns. Lawn fertilizer NPK BIO Vital is the purely biological-mineral soil-building fertilizer without herbicide content. Article 910 Grass seeds complement overseeding and repair.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"11 kg canister","offer_id":58572419170688,"sku":"899-0011","price":126.5,"currency_code":"EUR","in_stock":true},{"title":"25 kg canister","offer_id":58572419203456,"sku":"899-0025","price":266.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"rasensamen-spezialmischung-strapazierfaehiger-rasen","title":"Lawn Seed Coverax Special Blend","description":"\u003cp\u003eThe Coverax special blend is a lawn seed mixture for establishing new, durable lawns and for repairing existing stands. The variety composition consists of 21% Lolium perenne TEMPRANO, 16% Lolium perenne ROY, 8% Lolium perenne TREND, 10% Lolium perenne NAKI, 30% Festuca rubra rubra REVERENT, 10% Lolium westerwoldicum NUSPRINT, and 5% Poa pratensis BALIN. The high proportion of perennial ryegrass ensures rapid establishment and high regenerative capacity, while the red fescue content provides density and resilience even under less favorable site conditions. For operators of sports facilities, schools, and residential complexes, this means short closure times after sowing and a surface that withstands foot traffic. The mixture is declared as a small EG-B package with identification number DE05-1035205 and mixture number DE055-4130508M for landscaping purposes, net content 10 kg.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePure blend of seven declared varieties\u003c\/li\u003e\n\n\u003cli\u003e30% red fescue for density and resilience\u003c\/li\u003e\n\n\u003cli\u003eRobust and highly regenerative under foot traffic\u003c\/li\u003e\n\n\u003cli\u003eAlso for repairing existing lawns\u003c\/li\u003e\n\n\u003cli\u003e10 kg sufficient for approx. 300 m²\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eDig over the soil spade-deep, rake and level the surface, roll and allow to dry. Sow from April to October at 30 to 50 g\/m² by hand or with a suitable machine, lightly rake in and roll. Fertilize after rolling. The new sowing must not dry out. When the grass is 8 to 10 cm high, make the first cut to 5 cm length, subsequent maintenance cuts to 3 to 4 cm. Fertilize regularly, several times at 20 g\/m² according to manufacturer's instructions, and always remove clippings. Verticut in spring to remove thatch and soil compaction.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady-to-use seed mixture, do not dilute. Sowing rate 30 to 50 g\/m².\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003e10 kg is sufficient for approx. 300 m² of new sowing. For overseeding with a reduced sowing rate of 20 g\/m², approximately 500 m².\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eNew establishment of durable lawns and repair and overseeding of existing lawns in residential and commercial complexes, sports facilities, schools, municipal green spaces, and recreational areas.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003ePure seed without chemical active ingredients. A prerequisite is prepared, finely crumbled soil. The new sowing must not dry out until emergence. The data sheet does not contain information on unsuitable locations.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 898 Bee Pasture Flower Seeds is the ecological flower mixture for compensatory areas instead of functional lawns. For nutrient supply after sowing, Art. 899 Lawn Fertilizer NPK BIO Vital is suitable, and for weed-infested existing stands, Art. 904 Lawn Fertilizer with Weed Control.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSold exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg container","offer_id":58572419596672,"sku":"910-0010","price":122.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"covil-konservierung-korrosionsschutz-metall","title":"COVIL PRESERVATION","description":"\u003cp\u003eCOVIL CONSERVATION is a fully synthetic surface protection based on multifunctional preservatives. The product protects metals from rust, saltwater, water, and other aggressive liquids, forming a touch-dry, non-tacky protective film. The crucial technical difference from thick-layer waxes lies in its low density of approximately 0.8: The product creeps into the finest cracks, folds, and overlaps, building corrosion protection precisely where road salt and moisture undermine conventional coatings. For municipal depots and fleet operators, this is particularly relevant for winter storage: snowplows and gritters, agricultural, construction, and forestry machinery measurably lose residual value due to salt corrosion, and the repair of corroded frames and attachments ties up workshop capacity. Since the film is not tacky, treated vehicles remain operable and attract less dust. Vehicles in a seawater climate can also be preserved with this product. The product is flammable and must be stored and processed accordingly.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCreeps into the finest cracks due to low density\u003c\/li\u003e\n\n\u003cli\u003eTouch-dry, non-tacky protective film\u003c\/li\u003e\n\n\u003cli\u003eProtection against saltwater and aggressive liquids\u003c\/li\u003e\n\n\u003cli\u003eFor winter storage of agricultural, construction, and forestry machinery\u003c\/li\u003e\n\n\u003cli\u003eDrying time at 20 degrees Celsius approximately 1.5 hours\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eRemove grease and oil from the surface before application; the substrate must be clean. Warm the product to approximately 20 degrees Celsius before processing and shake or stir well to ensure the ingredients are evenly distributed. Apply undiluted to the surfaces to be protected, using a brush, lambskin roller, pressure sprayer, or airless device. Processing temperature 5 to 30 degrees Celsius. For optimal protection, apply 2 to 3 coats. Drying time at 20 degrees Celsius approximately 1.5 hours; allow sufficient flash-off time between coats. The product is flammable (H226), may be fatal if swallowed and enters airways (H304), may cause respiratory irritation (H335), and may cause drowsiness or dizziness (H336). Process only in well-ventilated areas and away from ignition sources, do not breathe spray mist, wear protective gloves and eye protection. Multi Clean Alka (Art. 257B) is suitable for later removal of the protective film.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply undiluted, 2 to 3 coats for optimal protection. Warm to approximately 20 degrees Celsius and stir well before use.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eFor a double application, depending on the surface roughness, approximately 100 to 150 milliliters per square meter can be expected. A 10-liter container is therefore sufficient for approximately 70 to 100 square meters of treated area, which corresponds to about 3 to 6 snowplows or gritters, depending on the design.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003ePreservation of agricultural machinery, construction machinery, forestry machinery, and snowplows in the municipal sector, tractors, trucks, low loaders, gritters, as well as vehicles and superstructures used in seawater climates and thus exposed to saltwater.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eFor metals and steel structures susceptible to rust. Protects against saltwater, water, and other aggressive liquids. Creeps into the finest cracks due to its low density of approximately 0.8. Forms a touch-dry, non-tacky film. Clean greasy and oily substrates beforehand, as the film will not adhere otherwise.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS07 Exclamation Mark, GHS08 Health Hazard\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H226 Flammable liquid and vapor.; H304 May be fatal if swallowed and enters airways.; H335 May cause respiratory irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.; P241 Use explosion-proof electrical equipment\/ventilating\/lighting.; P243; P261 Avoid breathing dust\/fume\/gas\/mist\/vapors\/spray.; P301; P310 Immediately call a POISON CENTER\/doctor.; P331; P405 Store locked up.; P501 Dispose of contents\/container to approved waste disposal facility.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCOVIL CONSERVATION is a pure preservation product for service life and winter storage. The concrete release agent (Art. 924) and the plant oil-based organic release agent (Art. 309A) additionally combine corrosion protection with a release effect against asphalt and mortar adhesion. Multi Clean Alka (Art. 257B) is intended for removing the protective film.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L Bottle","offer_id":58572419760512,"sku":"922-0001","price":31.9,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572419793280,"sku":"922-0010","price":196.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572419826048,"sku":"922-0030","price":541.9,"currency_code":"EUR","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/collections\/iStock-1166203849.jpg?v=1785177182","url":"https:\/\/coverax.de\/en\/collections\/aussenanlagen-gartenbau.oembed","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}