{"title":"Exterior, Stone \u0026 Facade Cleaning","description":null,"products":[{"product_id":"anti-graffiti-spray-graffitientferner-beton","title":"Anti-graffiti spray","description":"\u003cp\u003eAnti-graffiti spray is an extra-strong graffiti and label remover for mobile use. It quickly and reliably removes lacquers, paints, Edding markers, felt-tip pens, and stickers from all solvent-resistant surfaces such as concrete, sandstone, granite, metal, glass, aluminum, ceramic, and steel. The aerosol form offers a decisive practical advantage for removal service providers and municipal building yards: smaller tags on traffic signs, control cabinets, platform furniture, or vehicles can be treated immediately, without needing equipment, canisters, or a water connection on site. For large-area facade work, the gel and canister variants of the range are available.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtra strong and fast dissolving action\u003c\/li\u003e\n\n\u003cli\u003eRemoves lacquers, Edding markers, felt-tip pens, and stickers\u003c\/li\u003e\n\n\u003cli\u003eMobile use without equipment or water connection\u003c\/li\u003e\n\n\u003cli\u003eApproved for concrete, natural stone, metal, and glass\u003c\/li\u003e\n\n\u003cli\u003eIdeal for quick response to fresh tags\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eTest the surface to be treated for colorfastness and resistance in advance. Shake the can vigorously, spray undiluted from a distance of 20–30 cm, let it work briefly, and mechanically remove paint residues with a cloth, brush, sponge, or high-pressure cleaner. Neutralize the surface with water after application.\u003c\/p\u003e\u003ch3\u003eDosing\u003c\/h3\u003e\u003cp\u003eReady to use, spray undiluted. Do not dilute.\u003c\/p\u003e\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\u003cp\u003eOne 400 ml can is sufficient for approx. 2–4 m² of graffiti surface or 30–50 smaller tags.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eConcrete, sandstone, granite, metal, glass, aluminum, ceramic, steel. Traffic signs, control cabinets, platform furniture, vehicles, containers, facades.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eDo not apply to rubber, Plexiglas, plastics, or leather – these materials are not solvent-resistant. Always test in an inconspicuous area beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal Word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame, GHS04 Gas Cylinder, GHS07 Exclamation Mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H226 Flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280; H319 Causes serious eye irritation.; H332 Harmful if inhaled.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEUH-Statements:\u003c\/strong\u003e EUH018; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapours\/spray.; P271 Use only outdoors or in a well-ventilated area.; P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312 Call a POISON CENTER\/doctor if you feel unwell.\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eArt. 664 ANTIPAROLI-GEL and Art. 695\/596 Graffiti-Gel are the stable gels for large vertical facade surfaces. Art. 559 Spray Ex is the gentle remover for sensitive substrates. Art. 660 Graffiti Remover HMF is the canister variant for high consumption.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58572387123584,"sku":"138-01","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"6x 400ml Dose","offer_id":58819583115648,"sku":"138-06","price":120.9,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml can","offer_id":58572387156352,"sku":"138-12","price":224.5,"currency_code":"EUR","in_stock":true},{"title":"24x 400ml Dose","offer_id":58819583148416,"sku":"138-24","price":428.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-138-anti-graffiti-spray-farb-aufkleberloeser-produktbild.png?v=1788170914"},{"product_id":"covil-oel-ex-oelzieher-steinreiniger","title":"Covil Oil-Ex Spray","description":"\u003cp\u003eCovil Öl-Ex Spray removes stubborn grease, oil, and wax stains from absorbent and non-absorbent surfaces. The product acts as an oil extractor: it penetrates deep into the substrate, binds the oil stain, and, as it dries, transports it back to the surface as a brushable crust – scrubbing or brushing during the exposure time is completely eliminated. The gel aerosol form offers clear practical advantages over liquid and powdered oil removers: it doesn't run, can be used even in windy conditions, allows for precise application, and works on vertical and sloping surfaces. The product is free of acids and alkalis and does not attack stone surfaces.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtracts oil from deep within instead of just spreading it\u003c\/li\u003e\n\n\u003cli\u003eNo scrubbing or brushing during the exposure time\u003c\/li\u003e\n\n\u003cli\u003eGel form doesn't run – can also be applied vertically\u003c\/li\u003e\n\n\u003cli\u003eCan be used even in windy conditions (unlike powder)\u003c\/li\u003e\n\n\u003cli\u003eFree of acids and alkalis, gentle on stone\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eShake can before use. Spray onto the dry surface from a distance of 20–30 cm in a vertical position. Allow to dry completely, then brush off or vacuum up the formed crust and dispose of it properly. Exposure time depends on ambient temperature and degree of contamination. Oleophobic impregnation is recommended afterwards.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use. Spray to cover the stain, including the edge area.\u003c\/p\u003e\n\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\n\u003cp\u003eOne 400 ml can treats approx. 1.5–2.5 m² of stained area.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eConcrete, clinker, asphalt, ceramic tiles, natural stone, terracotta. Garages and underground car parks, petrol stations, workshop floors, pavements, car parks, driveways, entrance stairs, terraces, grease stains in kitchen areas.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eFree of acids and alkalis, does not attack stone surfaces. Test beforehand on polished natural stones. Do not spray into flames or onto incandescent objects.\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 500ml Can","offer_id":58572387320192,"sku":"149-01","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"12x 500ml Can","offer_id":58572387352960,"sku":"149-12","price":238.8,"currency_code":"EUR","in_stock":true}]},{"product_id":"dispersions-farbloeser-farbentferner-ckw-frei","title":"Dispersion Paint Solvent","description":"\u003cp\u003eThe dispersion paint remover is a biodegradable dispersion paint remover and synthetic resin plaster remover for indoor and outdoor use with very low odor nuisance. The central advantage lies in a property that fundamentally changes the workflow: the product does not evaporate – as long as moisture is present, the dissolving activity remains fully intact. For multi-layer facade coatings, work can therefore be carried out for hours without reapplication, whereas solvent-based strippers already lose their effectiveness after minutes. The product penetrates even multiple layers in a short time and does not attack glass, metals, or anodized aluminum. It is free of CFCs and chlorinated hydrocarbons, non-toxic, non-flammable, and contains no environmentally harmful solvents.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDoes not evaporate – full dissolving activity for hours\u003c\/li\u003e\n\n\u003cli\u003eFree of CFCs and chlorinated hydrocarbons, non-flammable\u003c\/li\u003e\n\n\u003cli\u003eVery low odor nuisance\u003c\/li\u003e\n\n\u003cli\u003eDoes not attack glass, metals, or anodized aluminum\u003c\/li\u003e\n\n\u003cli\u003ePenetrates multiple paint layers in one application\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eDivide the facade area into sections and apply the paint remover, preferably with a brush. On smooth surfaces, remove the softened paint with a spatula, and remove residues with water and a brush. For rough surfaces, use a high-pressure cleaner. Always work from bottom to top. Only use brushes made of natural material. Ensure good ventilation in closed rooms.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, apply undiluted. Do not dilute.\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister treats approx. 60–120 m² of facade area, depending on layer thickness and substrate.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eIndoor and outdoor use. Dispersion paints, synthetic resin plasters, acrylic coatings, oil paints, and varnishes on all water-, alkali-, and solvent-resistant materials such as stone, plastic, and glass.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eDoes not attack glass, metals, or anodized aluminum. For water-, alkali-, and solvent-resistant materials. Free of CFCs and chlorinated hydrocarbons, non-flammable. Only use natural hair brushes.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H302 Harmful if swallowed.; H312 Harmful in contact with skin.; H315 Causes skin irritation.; H319 Causes serious eye irritation.; H332 Harmful if inhaled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eArt. 334 Paint remover extra is the reinforced version for stubborn coatings. Art. 654 CM 51 cold stripper is the stripper for metal parts. Art. 664 ANTIPAROLI-GEL is the graffiti remover for vertical surfaces.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572393251200,"sku":"280-0001","price":21.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572393283968,"sku":"280-0012","price":218.5,"currency_code":"EUR","in_stock":true},{"title":"10 L container","offer_id":58572393316736,"sku":"280-0010","price":151.0,"currency_code":"EUR","in_stock":true},{"title":"30 L container","offer_id":58572393349504,"sku":"280-0030","price":420.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572393382272,"sku":"280-0060","price":773.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"oelzieher-gel-oelflecken-stein-beton","title":"Oil Puller Gel","description":"\u003cp\u003eOil Puller Gel is a special gel for removing oil stains from alkali-resistant surfaces. It is applied as a paste-like layer to the stained area and extracts oil and oil residues from the subsurface within approximately 24 hours, without any mechanical processing. The difference from liquid degreasers lies in its retention time: because the gel does not run off and does not dry out prematurely, it works deeply for hours and even extracts old oil that has already penetrated concrete or screed. In addition, the product is suitable for removing fire soot and fire oil residues, as well as for eliminating fire odors caused by stubborn contaminants. For businesses, this means that remediation after oil damage or fires is possible without milling or sanding the floor. The area remains unused during the exposure time, after which a simple rinse is sufficient, ideally with a hot water high-pressure cleaner.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtracts oil in about 24 hours without mechanics\u003c\/li\u003e\n\n\u003cli\u003eRemains as a gel and does not dry out prematurely\u003c\/li\u003e\n\n\u003cli\u003eAlso effective against fire soot and fire oil residues\u003c\/li\u003e\n\n\u003cli\u003eReduces fire odors from stubborn contaminants\u003c\/li\u003e\n\n\u003cli\u003eContainer sizes from 1 kg to 66 kg available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eClean the surface of loose dirt and test material compatibility beforehand in an inconspicuous area. Apply Oil Puller Gel evenly to the area to be treated with a brush, swab, or rubber squeegee. Then cover if necessary so that the gel can optimally combine with the stain and does not dry out prematurely. After about 24 hours of exposure, rinse the surface with water, if possible with a hot water high-pressure cleaner. Repeat the process for heavy soiling. Do not enter the treated area during the exposure time and keep it cordoned off. After treatment, the manufacturer recommends an oleophobic impregnation to prevent renewed oil penetration. Wear protective gloves.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDepending on the layer thickness and absorbency of the substrate, approximately 0.5 to 1 kg per square meter should be planned. The 1 kg can therefore covers about one to two square meters of stained area, and the 33 kg canister about 33 to 66 m².\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eWorkshop and hall floors, garages and underground car parks, parking spaces and courtyards, terraces as well as areas after fire damage with soot and fire oil residues.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for all alkali-resistant surfaces such as concrete, cement, tiles, stoneware, artificial stone, and wood. Not for alkali-sensitive coverings. Material compatibility must be tested in an inconspicuous area before application, and the treated area must not be entered during the exposure time.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCovil Öl-Ex Liquid (Art. 354) is poured on as a liquid, gels on the surface, and is brushed off dry, making it the faster solution for applications without a water connection. Oil Puller Gel requires approximately 24 hours of retention time and subsequent rinsing, but it also extracts deeply absorbed old oil.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572405473664,"sku":"358-0010","price":179.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"super-graffiti-gel-graffitientferner-pastoes","title":"Super Graffiti Gel","description":"\u003cp\u003eSUPER-GRAFFITI-GEL is a high-performance graffiti remover with a pasty consistency. The product removes paint smears and graffiti from all water-resistant surfaces such as exposed concrete, natural and artificial stone, metal, aluminum, and plastic facades, without damaging the surface. The technical difference to thin paint removers lies in its consistency: the gel adheres to vertical surfaces, does not run off, and thus keeps the active ingredient at the site of contamination for the entire contact time. This results in a significantly stronger effect against stubborn paint and acrylic residues than with liquid products that run off the surface. Depending on the absorbency of the substrate, consumption is around 100 to 250 grams per square meter. For companies, this means fewer post-treatments on facades and structures, lower material consumption per square meter, and shorter idle times for scaffolding and lifts. After drying, the cleaned surface can be immediately treated further with the ANTIPAROLI protection systems, so that cleaning and prophylaxis can be planned in one work step. Stored unopened in original containers in a cool, dry, and light-protected place, the product has a shelf life of at least twelve months.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePasty consistency adheres securely to vertical surfaces\u003c\/li\u003e\n\n\u003cli\u003eConsumption only 100 to 250 grams per square meter\u003c\/li\u003e\n\n\u003cli\u003eRemoves stubborn paint and acrylic residues without surface damage\u003c\/li\u003e\n\n\u003cli\u003eCan also be used on aluminum and plastic facades\u003c\/li\u003e\n\n\u003cli\u003eDirectly combinable with ANTIPAROLI protection systems\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eApply SUPER-GRAFFITI-GEL undiluted to the surface to be cleaned using a brush, whitewash brush, or lambskin roller and allow it to take effect. For extremely stubborn dirt and encrustations, briefly break up the dirt's static with a brush. Then rinse thoroughly with clear water. After drying, the surface can be further treated with ANTIPAROLI protection systems to prevent new smears. Test material compatibility beforehand in an inconspicuous area. Store only in original containers, cool, dry, and protected from light, as well as out of reach of children, unopened for at least 12 months.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, do not dilute. Apply undiluted to the dry surface.\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eDepending on the absorbency of the substrate, consumption is around 100 to 250 grams per square meter. A 10-kg container is therefore sufficient for approximately 40 to 100 square meters, a 30-kg container for around 120 to 300 square meters.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003eExposed concrete surfaces, natural and artificial stone facades, metal and aluminum cladding, plastic facades, noise barriers, underpasses, bridges, retaining walls, and structures in public spaces.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for all water-resistant surfaces such as exposed concrete, natural and artificial stone, metal, aluminum, and plastic facades. Before applying to the entire area, a preliminary test should be carried out in an inconspicuous spot. Do not use on water-sensitive substrates and materials that cannot be rinsed with water.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eSUPER-GRAFFITI-GEL (Art. 596) is the high-performance remover for water-resistant exterior surfaces. For sensitive interior areas, SPRAY-EX (Art. 599) is the gentler choice, and for alkali-resistant mineral substrates, ANTIPAROLI-GEL (Art. 644). Price and container information is not available; check information before publication.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"10 kg canister","offer_id":58572413534592,"sku":"596-0010","price":597.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"graffiti-entferner-hmf-gel-fassade","title":"Graffiti Remover HMF","description":"\u003cp\u003eGraffiti Remover HMF is a highly effective product for removing paint graffiti, specially formulated for absorbent surfaces. Its gel-like consistency ensures high adhesion to vertical surfaces, so the product does not run off facades and the active ingredients remain where they should work. It removes aerosol paints, ink, wax, ballpoint pen paste, nail polish, adhesive, and tar paints from absorbent and porous surfaces. The extremely long open time also dissolves so-called ghosting, which remains in the pore structure with short-acting removers. The product is suitable for natural and artificial stones such as marble, shell limestone, travertine, all types of sandstone, clinker, bricks, facing bricks, limestones, and mineral plaster. The cleaning solution is biodegradable and can be discharged into the sewage system in compliance with local regulations, which simplifies disposal on construction sites.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGel-like consistency adheres to vertical facades\u003c\/li\u003e\n\n\u003cli\u003eExtremely long open time also removes ghosting\u003c\/li\u003e\n\n\u003cli\u003eEspecially for absorbent natural and artificial stones\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable, solution can be discharged into the sewage system\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eApply Graffiti Remover HMF to the surface to be cleaned with a sponge or brush. After an exposure time of approximately 5 to 15 minutes, rinse with high-pressure water. For deep paint deposits in the underlying pore structure, extend the exposure time to 2 to 3 hours; the product must not dry out and should be covered with foil if necessary. Processing temperatures below 5 °C significantly impair the dissolving properties and are not recommended. Before applying to the entire surface, test material compatibility in an inconspicuous area. Wear safety glasses and protective gloves; prolonged skin contact may cause skin dryness. Effective protection against new graffiti is achieved with the coordinated Coverax product ANTIPAROLI.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eApply undiluted, do not dilute with water\u003c\/p\u003e\n\u003ch3\u003eConsumption and Coverage\u003c\/h3\u003e\n\u003cp\u003eAt approximately 200 to 400 ml per square meter, a 1-liter bottle is sufficient for about 3 to 5 m² of facade area, a 10-liter canister for about 25 to 50 m². For deep deposits and long open times, higher consumption should be expected.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eFacades and visible masonry made of marble, shell limestone, travertine, sandstone, clinker, brick, facing bricks, limestone and mineral plaster, underpasses, retaining walls, noise barriers, and monuments.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for all absorbent and porous natural and artificial stones as well as mineral plaster. Do not use on PVC, acrylic, Plexiglas, or similarly sensitive surfaces. Before application, test material compatibility in an inconspicuous area.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eready-to-use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eDanger\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003eHazard Statements\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS05 Corrosive, GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H302 Harmful if swallowed.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P302+P352 IF ON SKIN: Wash with plenty of water and soap.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310 Immediately call a POISON CENTER\/doctor.; P501 Dispose of contents\/container to approved waste disposal facility.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eANTIPAROLI-GEL (Art. 664) cleans and strips paint from alkali-resistant surfaces including glass and concrete, while Graffiti Remover HMF is designed for absorbent stones with deep pore structures. For residual ghosting after removal, the Shadow Remover (Art. 674) is provided.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572414779776,"sku":"660-0001","price":41.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572414812544,"sku":"660-0012","price":419.5,"currency_code":"EUR","in_stock":true},{"title":"10 L container","offer_id":58572414845312,"sku":"660-0010","price":290.5,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572414878080,"sku":"660-0030","price":807.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572414910848,"sku":"660-0060","price":1485.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"alunal-aluminiumreiniger-eloxal-fassade","title":"ALUMNI ASSOCIATION","description":"\u003cp\u003eALUNAL is a special cleaner for facades and other building components made of anodised and aluminium, designed for anodically oxidised surfaces and aluminium alloys in construction. The concentrate is particularly effective against greasy and oily dirt. The technical difference to universal cleaners lies in the formulation: In addition to anionic-non-ionic surfactants with high dirt-dissolving and dispersing capabilities, ALUNAL contains complexing agents against scale formation and white tarnishing, protective colloids, stabilisers and dispersing agents for the detached dirt particles, as well as corrosion inhibitors to prevent attack on anodised and aluminium. With a pH value of 7.5 to 8, it is within the reference values of the Aluminiumzentrale (Aluminium Centre). For contractors, this means a predictable cleaning of high-quality facade elements without white tarnishing or staining, thus without the risk of costly rework on visible components. Subsequent preservation with ALU-CON gives the facade a uniform appearance and a protective film against aggressive pollutants.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCorrosion inhibitors protect anodised and aluminium\u003c\/li\u003e\n\n\u003cli\u003epH 7.5 to 8 according to Aluminiumzentrale guidelines\u003c\/li\u003e\n\n\u003cli\u003eComplexing agents prevent scale formation and white tarnishing\u003c\/li\u003e\n\n\u003cli\u003eDissolves greasy and oily dirt on facades\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eDilute ALUNAL with water depending on the degree of soiling, apply and allow to act briefly. Rubbing with a cleaning cloth, nylon pad or similar increases the cleaning effect. Then rinse thoroughly with water; high-pressure cleaners are also suitable for application and rinsing. Do not allow the cleaner to dry on the surface and always work section by section. For more stubborn dirt, ALUNAL S is provided as an enhancement. After cleaning, preservation with ALU-CON is recommended, which forms a protective film to ward off aggressive pollutants and dirt. Wear protective gloves and safety glasses and check material compatibility on a sample area in advance for unknown alloys or coatings.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eDilute with water depending on the degree of soiling; determine ratio using a sample area\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eWith approximately 150 ml of application solution per square metre of facade area, a 10-litre canister, depending on the chosen dilution, is sufficient for several hundred square metres of aluminium and anodised surfaces.\u003c\/p\u003eAreas of Application\u003cp\u003eAluminium and anodised facades, window profiles, sun protection and attic elements, door systems and other building components made of aluminium alloys in construction.\u003c\/p\u003eMaterial Compatibility\u003cp\u003eEspecially for anodically oxidised surfaces and aluminium alloys; corrosion inhibitors prevent attack on anodised and aluminium, complexing agents prevent white tarnishing. pH value 7.5 to 8 within the reference values of the Aluminiumzentrale. For unknown coatings, check on a sample area in advance.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eALU-CON (Art. 665) is the associated preservative that forms a water and dirt-repellent protective film after cleaning with ALUNAL. For pH-neutral facade and machine cleaning without aluminium specificity, CONIL 2 phosphate-free (Art. 690) is available.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572416090496,"sku":"670-0001","price":17.7,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572416123264,"sku":"670-0012","price":178.0,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572416156032,"sku":"670-0010","price":123.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572416188800,"sku":"670-0030","price":342.0,"currency_code":"EUR","in_stock":true},{"title":"60 L canister","offer_id":58572416221568,"sku":"670-0060","price":629.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"conil-1-entfetter-industriereiniger","title":"CONIL 1","description":"\u003cp\u003eCONIL 1 is a biodegradable cleaning and degreasing concentrate with a very wide range of applications. For painting and building cleaning companies, it removes stubborn contaminants such as oil, wax, soot, and nicotine from almost all waterproof surfaces and is excellent for eliminating fire damage. Transport companies use it for cleaning tanks, barrels, tank wagons, operating facilities, and machines, while mechanical and plant engineering companies use it for cleaning and degreasing machines, plants, semi-finished and finished parts, as well as for metal degreasing before painting. The decisive operational advantage lies in the dilution range from 1:100 to pure: a single item covers everything from economical machine washing in high-pressure cleaners to concentrated facade cleaning. This reduces the number of stock items, simplifies instruction and hazardous substance directories, and allows for working cold or hot, using immersion or spray methods.\u003c\/p\u003e\u003ch3\u003eYour advantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDilution range 1:100 to pure for all washing methods\u003c\/li\u003e\n\n\u003cli\u003eBiodegradable and suitable for immersion and spray methods\u003c\/li\u003e\n\n\u003cli\u003eRemoves soot and nicotine during fire damage restoration\u003c\/li\u003e\n\n\u003cli\u003eMetal degreasing before painting without loss of adhesion\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct application\u003c\/h3\u003e\u003cp\u003eFor facade, plaster, and painted surfaces, apply CONIL 1 with a sponge, brush, or spray gun, allow to act for a short time, and rinse with water; dilution 1:10 to pure. Any remaining cleaner residues do not affect the adhesion and aging of commercially available paints. For machines and equipment, CONIL 1 can be used in all washing methods and in any mixing ratio, cold or hot, by immersion or spray method, as well as directly via chemical dosing in high-pressure cleaners; dilution 1:100 to 1:5. Liquid and vapor are highly flammable, so keep away from ignition sources and ensure good ventilation. Wear safety goggles and protective gloves, as the product can cause skin irritation and serious eye damage. Observe local wastewater regulations.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eFacade and plaster surfaces 1:10 to pure; machines and equipment 1:100 to 1:5\u003c\/p\u003e\u003ch3\u003eConsumption and yield\u003c\/h3\u003e\u003cp\u003eA 30-liter canister yields approximately 3,000 liters of application solution for machine cleaning at 1:100. At 1:10 for facade and soot-covered surfaces, approximately 330 liters remain, which covers several hundred square meters depending on the application.\u003c\/p\u003e\u003ch3\u003eAreas of application\u003c\/h3\u003e\u003cp\u003eFacades, plaster and painted surfaces, fire-damaged surfaces with soot contamination, nicotine-contaminated interior surfaces, tanks, barrels, tank wagons, operating facilities, machines, semi-finished and finished parts, and metal parts before painting.\u003c\/p\u003e\u003ch3\u003eMaterial compatibility\u003c\/h3\u003e\u003cp\u003eSuitable for almost all waterproof surfaces and for metal parts before painting. Remaining cleaner residues do not affect the adhesion and aging of commercially available paints. For sensitive or painted surfaces, allow a short contact time and test in an inconspicuous area beforehand.\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\n\u003ctd\u003eConcentrate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e11\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eWarning\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e GHS02 Flame, GHS05 Corrosion, GHS07 Exclamation mark\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-phrases:\u003c\/strong\u003e H225 Highly flammable liquid and vapor.; H315 Causes skin irritation.; H318 Causes serious eye damage.; H319 Causes serious eye irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337+P313 If eye irritation persists: Get medical advice\/attention.\u003c\/p\u003e\u003ch3\u003eProduct comparison\u003c\/h3\u003e\u003cp\u003eCONIL 3 (Art. 683) is the alkaline variant specifically for acid-sensitive natural and artificial stones on facades, CONIL 5 (Art. 685) is the extra strong stone cleaner. For pH-neutral cleaning with corrosion protection, CONIL 2 phosphate-free (Art. 690) is provided.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L bottle","offer_id":58572416287104,"sku":"673-0001","price":17.5,"currency_code":"EUR","in_stock":true},{"title":"12 x 1 L carton","offer_id":58572416319872,"sku":"673-0012","price":176.5,"currency_code":"EUR","in_stock":true},{"title":"10 L canister","offer_id":58572416352640,"sku":"673-0010","price":122.0,"currency_code":"EUR","in_stock":true},{"title":"30 L canister","offer_id":58572416385408,"sku":"673-0030","price":339.0,"currency_code":"EUR","in_stock":true},{"title":"60 L container","offer_id":58572416418176,"sku":"673-0060","price":624.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"rost-ex-rostentferner-stein-beton","title":"Rust Remover","description":"\u003cp\u003eRost-Ex is a rust remover for stone and concrete that extracts rust stains from all types of stone such as concrete, granite, slate, marble, and shell limestone. Typical damage patterns include stains from vases, parasol stands, or metal furniture on patios and grave sites. Rust originating from inside the stone can also be treated. The practical difference from classic rust removers lies in the combination of active principle and control: The product extracts rust from the pore structure, instead of merely dissolving it superficially, and indicates when the reaction is complete through a violet discoloration. This allows the operation to be controlled without prior experience, and the treatment is repeated until the rust is no longer visible. The product contains a sulfur compound and smells accordingly, which is why work should only be carried out in well-ventilated areas.\u003c\/p\u003e\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eExtracts rust from the pore structure of stone and concrete\u003c\/li\u003e\n\n\u003cli\u003eViolet discoloration indicates the progress of the reaction\u003c\/li\u003e\n\n\u003cli\u003eAlso effective on rust from inside the stone\u003c\/li\u003e\n\n\u003cli\u003eCan be used on marble, granite, slate, and shell limestone\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eProduct Application\u003c\/h3\u003e\u003cp\u003eBefore use, test material compatibility. Apply Rost-Ex undiluted to the stains to be removed and allow it to act until the product turns violet; this discoloration serves as an indicator for the progress of the reaction. Then rinse with water and repeat the treatment until the rust is no longer visible. After the exposure time, rinse with plenty of water until the violet discoloration no longer appears. Use only in well-ventilated areas, as the product contains a sulfur compound and smells accordingly. Wear protective gloves and safety glasses, cover adjacent metal parts.\u003c\/p\u003e\u003ch3\u003eDosage\u003c\/h3\u003e\u003cp\u003eReady to use, apply undiluted and do not dilute\u003c\/p\u003e\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\u003cp\u003eSince it is only applied selectively to the rust stains, a 1-liter bottle is sufficient for numerous individual stains or approximately 3 to 5 m² of continuously treated area. Multiple repetitions increase consumption accordingly.\u003c\/p\u003e\u003ch3\u003eAreas of Application\u003c\/h3\u003e\u003cp\u003ePatio slabs, yard areas, gravestones and grave sites, facade and wall surfaces made of concrete, granite, slate, marble, and shell limestone with rust stains.\u003c\/p\u003e\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\u003cp\u003eFor all types of stone such as concrete, granite, slate, marble, and shell limestone. Test material compatibility before use. Contains a sulfur compound, therefore use only in well-ventilated areas.\u003c\/p\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eready to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003epH value (concentrate)\u003c\/td\u003e\n\n\u003ctd\u003e7\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSignal word\u003c\/td\u003e\n\n\u003ctd\u003eCaution\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\u003ch3\u003eHazard Statements\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eGHS pictograms:\u003c\/strong\u003e no pictogram required\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eP-phrases:\u003c\/strong\u003e P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.; P301; P305; P310 Immediately call a POISON CENTER\/doctor.; P331\u003c\/p\u003e\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\u003cp\u003eENTRO (Art. 679) is the acid-based rust remover for metal parts such as chains, screws, and construction equipment, whereas Rost-Ex works on mineral substrates and removes rust discoloration in stone. For cement and lime film on acid-resistant stones, REINFIX (Art. 652) is intended.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSale exclusively to commercial customers. All prices are net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1 L canister","offer_id":58572417892736,"sku":"699-0001","price":21.7,"currency_code":"EUR","in_stock":true}]},{"product_id":"cover-grease-m-hochtemperaturfett-schmierfett","title":"Cover-Grease-M","description":"\u003cp\u003eCover-Grease-M is a ceramic-reinforced high-performance assembly grease for lubrication points where conventional greases fail thermally or mechanically. The lubricating film remains effective from approx. -180 °C to approx. +1,300 °C and withstands surface pressures up to around 10,000 bar. This reliably prevents seizing, fretting corrosion, and wear on hot screw connections. The formula is free of lead, nickel, cadmium, and PCBs, making it approved for companies with strict material and environmental requirements. Cover-Grease-M is resistant to water, fuels, and oils, as well as largely resistant to vapors, gases, and acids, remains abrasion-resistant, and does not age. For maintenance and assembly, this means: fewer disassembly damages, shorter downtimes, and predictable maintenance intervals.\u003c\/p\u003e\n\u003ch3\u003eYour Advantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTemperature resistant from approx. -180 °C to +1,300 °C\u003c\/li\u003e\n\n\u003cli\u003ePressure resistant up to approx. 10,000 bar\u003c\/li\u003e\n\n\u003cli\u003eFree of lead, nickel, cadmium, and PCBs\u003c\/li\u003e\n\n\u003cli\u003eResistant to water, fuels, oils, vapors, and most acids\u003c\/li\u003e\n\n\u003cli\u003ePrevents seizing and costly disassembly damage\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Application\u003c\/h3\u003e\n\u003cp\u003eDegrease metal surfaces and allow to dry. Shake can for approx. 30 seconds until the mixing ball is audible. Apply thinly in short bursts from a distance of 20–30 cm. After use, briefly spray the can upside down to keep the valve clear.\u003c\/p\u003e\n\u003ch3\u003eDosage\u003c\/h3\u003e\n\u003cp\u003eReady to use, no dilution necessary. \u003c\/p\u003e\n\u003ch3\u003eConsumption and Yield\u003c\/h3\u003e\n\u003cp\u003eA 400 ml can is sufficient for approx. 4–6 m² of thinly coated surface or around 150–200 individual screw connections.\u003c\/p\u003e\n\u003ch3\u003eAreas of Application\u003c\/h3\u003e\n\u003cp\u003eExhaust screw connections and gaskets, spark plugs, brake cams and pins, brake cables, cardan shafts, studs, flanges, compressors, turbines, pumps, hydrants, sprockets, rollers, chain tensioners.\u003c\/p\u003e\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for steel, stainless steel, cast iron, non-ferrous metals, and aluminum. Protects metal-rubber connections from dissolution. Do not use on brake linings and friction surfaces.\u003c\/p\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\n\u003ctd\u003eReady to use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eUFI Number\u003c\/td\u003e\n\n\u003ctd\u003e9P80-90G6-400Q-NA7F\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eHazard Warnings\u003cbr\u003e\n\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Word:\u003c\/strong\u003e Danger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGHS Pictograms:\u003c\/strong\u003e GHS02 Flame; GHS07 Exclamation Mark\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eH-Statements:\u003c\/strong\u003e H220 Extremely flammable gas; H222 Extremely flammable aerosol.; H225 Highly flammable liquid and vapor.; H229 Pressurized container: May burst if heated.; H280 Contains gas under pressure; may explode if heated.; H304 May be fatal if swallowed and enters airways.; H315 Causes skin irritation.; H336 May cause drowsiness or dizziness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEUH Statements:\u003c\/strong\u003e EUH018 In use may form flammable\/explosive vapor\/air mixture.; EUH066 Repeated exposure may cause skin dryness or cracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP-Statements:\u003c\/strong\u003e P101 If medical advice is needed, have product container or label at hand.; P102 Keep out of reach of children.; P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.; P211 Do not spray on an open flame or other ignition source.; P251 Pressurized container: Do not pierce or burn, even after use.; P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.; P271 Use only outdoors or in a well-ventilated area.; P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.; P312 Call a POISON CENTER\/doctor if you feel unwell.; P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.; P501 Dispose of contents\/container in accordance with local\/regional\/national\/international\u003cbr\u003eregulations.\u003c\/p\u003e\n\u003ch3\u003eProduct Comparison\u003c\/h3\u003e\n\u003cp\u003eIdentical effect compared to Art. 152 (Cover-Grease-M Paste), but as a spray for hard-to-reach areas. Art. 125 White Spray Grease is the choice for normal temperature ranges; Art. 126 Chain and Cable Spray for heavily stressed chains.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSales exclusively to commercial customers. All prices net plus statutory VAT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Coverax","offers":[{"title":"1x 400ml can","offer_id":58578112086400,"sku":"101-01","price":16.5,"currency_code":"EUR","in_stock":true},{"title":"12x 400ml Can","offer_id":58578112119168,"sku":"101-12","price":166.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/files\/coverax-cover-grease-m-hochleistungsschmiermittel.png?v=1785359481"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/2428\/6592\/collections\/images.jpg?v=1785660381","url":"https:\/\/coverax.de\/en\/collections\/aussen-stein-fassadenreinigung.oembed","provider":"Coverax-M-Chemie GmbH","version":"1.0","type":"link"}